CVE-2026-98137 - ntfs: treat any nonzero dio zero-range return as an error
CVE ID :CVE-2026-98137
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: ntfs: treat any nonzero dio zero-range return as an error ntfs_dio_zero_range() returns either 0 or a negative errno from blkdev_issue_zeroout(); it never returns a positive value. The zeroing failure check in ntfs_attr_fallocate() therefore never fired, so a failed zeroing operation was silently ignored: the loop kept going, the newly allocated clusters were folded into initialized_size and the write could succeed leaving stale on-disk data. Treat any nonzero return as an error and abort the allocation.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-98137
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: ntfs: treat any nonzero dio zero-range return as an error ntfs_dio_zero_range() returns either 0 or a negative errno from blkdev_issue_zeroout(); it never returns a positive value. The zeroing failure check in ntfs_attr_fallocate() therefore never fired, so a failed zeroing operation was silently ignored: the loop kept going, the newly allocated clusters were folded into initialized_size and the write could succeed leaving stale on-disk data. Treat any nonzero return as an error and abort the allocation.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-98138 - ntfs: do not mark the volume clean in sync_fs when errors were recorded
CVE ID :CVE-2026-98138
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: ntfs: do not mark the volume clean in sync_fs when errors were recorded ntfs_put_super() and the remount-read-only path both clear the dirty bit only when NVolErrors(vol) is false. ntfs_sync_fs() clears it unconditionally, so any sync() on a volume that recorded an error marks that volume clean. A volume without this set is then seen as not needing recovery and it does not run one, so whatever went wrong is never repaired. This change skips resetting the dirty bit when there are volume errors. Reproduced on a volume whose $MFTMirr does not match $MFT, which sets the error flag while leaving the mount read-write: after a write and a sync, the on-disk volume flags read 0x0000 with this driver and 0x0001 with the guard in place.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-98138
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: ntfs: do not mark the volume clean in sync_fs when errors were recorded ntfs_put_super() and the remount-read-only path both clear the dirty bit only when NVolErrors(vol) is false. ntfs_sync_fs() clears it unconditionally, so any sync() on a volume that recorded an error marks that volume clean. A volume without this set is then seen as not needing recovery and it does not run one, so whatever went wrong is never repaired. This change skips resetting the dirty bit when there are volume errors. Reproduced on a volume whose $MFTMirr does not match $MFT, which sets the error flag while leaving the mount read-write: after a write and a sync, the on-disk volume flags read 0x0000 with this driver and 0x0001 with the guard in place.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-98139 - ntfs: only count successfully cleared runs when freeing clusters
CVE ID :CVE-2026-98139
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: ntfs: only count successfully cleared runs when freeing clusters ntfs_cluster_free_from_rl_nolock() adds a run's length to nr_freed whenever the error bookkeeping condition is false, which includes cases where ntfs_bitmap_clear_run() actually failed - e.g. a second run failing with the same errno as an earlier one, or any failure after a non-ENOMEM error was already recorded. Since a failed ntfs_bitmap_clear_run() rolls back its partial modifications, no bits were cleared for that run, yet its length still inflates vol->free_clusters, corrupting statfs output and the allocator's free space gate. Only count runs whose bitmap clear succeeded.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-98139
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: ntfs: only count successfully cleared runs when freeing clusters ntfs_cluster_free_from_rl_nolock() adds a run's length to nr_freed whenever the error bookkeeping condition is false, which includes cases where ntfs_bitmap_clear_run() actually failed - e.g. a second run failing with the same errno as an earlier one, or any failure after a non-ENOMEM error was already recorded. Since a failed ntfs_bitmap_clear_run() rolls back its partial modifications, no bits were cleared for that run, yet its length still inflates vol->free_clusters, corrupting statfs output and the allocator's free space gate. Only count runs whose bitmap clear succeeded.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-98140 - ntfs: fix kmap_local leak in write_mft_record_nolock() error paths
CVE ID :CVE-2026-98140
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: ntfs: fix kmap_local leak in write_mft_record_nolock() error paths write_mft_record_nolock() maps the MFT record folio with kmap_local_folio(), but the pre_write_mst_fixup() and bio_add_folio() failure paths jump to the error label without unmapping it. kmap_local mappings are stack-ordered per task, so leaking one corrupts the nesting for any outer mapping. Unmap the folio on those error paths too.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-98140
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: ntfs: fix kmap_local leak in write_mft_record_nolock() error paths write_mft_record_nolock() maps the MFT record folio with kmap_local_folio(), but the pre_write_mst_fixup() and bio_add_folio() failure paths jump to the error label without unmapping it. kmap_local mappings are stack-ordered per task, so leaking one corrupts the nesting for any outer mapping. Unmap the folio on those error paths too.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-98141 - ntfs: propagate reparse index insertion failure
CVE ID :CVE-2026-98141
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: ntfs: propagate reparse index insertion failure update_reparse_data() ignores the return value of set_reparse_index(). When index insertion fails, the code removes the just-written reparse data as cleanup but still returns 0, so symlink(2) (and WSL special file creation) reports success while no reparse data exists on disk. When there was no previous reparse data (oldsize == 0), the failure was likewise silently ignored. Propagate the error to the caller.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-98141
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: ntfs: propagate reparse index insertion failure update_reparse_data() ignores the return value of set_reparse_index(). When index insertion fails, the code removes the just-written reparse data as cleanup but still returns 0, so symlink(2) (and WSL special file creation) reports success while no reparse data exists on disk. When there was no previous reparse data (oldsize == 0), the failure was likewise silently ignored. Propagate the error to the caller.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-98142 - drm/cirrus-qemu: Validate BAR0 size during probe
CVE ID :CVE-2026-98142
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: drm/cirrus-qemu: Validate BAR0 size during probe The `cirrus-qemu` driver relies on `CIRRUS_VRAM_SIZE` (4 MB) to validate framebuffer sizes. However, during PCI probe, the driver mapped BAR0 without verifying that its size matches `CIRRUS_VRAM_SIZE`. If a PCI device with a BAR0 smaller than 4 MB is bound to the driver, the mapped VRAM will be smaller than expected. Because validation checks assume 4 MB VRAM, framebuffers larger than the mapped memory can be created. When the display plane is updated (e.g. during release), `cirrus_primary_plane_helper_atomic_update()` copies the framebuffer to VRAM using `drm_fb_memcpy()`. Writing past the end of the mapped I/O memory causes a supervisor write page fault: BUG: unable to handle page fault for address: ffffc9000389c000 ... RIP: 0010:memcpy_toio+0x7c/0xe0 arch/x86/lib/iomem.c:110 ... Call Trace: iosys_map_memcpy_to include/linux/iosys-map.h:285 [inline] drm_fb_memcpy+0x325/0x5d0 drivers/gpu/drm/drm_format_helper.c:442 cirrus_primary_plane_helper_atomic_update+0x98a/0xb00 drivers/gpu/drm/tiny/cirrus-qemu.c:358 drm_atomic_helper_commit_planes+0x626/0xea0 drivers/gpu/drm/drm_atomic_helper.c:3038 drm_atomic_helper_commit_tail+0x60/0x510 drivers/gpu/drm/drm_atomic_helper.c:1989 commit_tail+0x2b1/0x3c0 drivers/gpu/drm/drm_atomic_helper.c:2074 drm_atomic_helper_commit+0xa77/0xb10 drivers/gpu/drm/drm_atomic_helper.c:2312 Fix this by validating in `cirrus_pci_probe()` that the PCI BAR0 resource is not less than `CIRRUS_VRAM_SIZE`, returning `-ENODEV` if it is less.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-98142
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: drm/cirrus-qemu: Validate BAR0 size during probe The `cirrus-qemu` driver relies on `CIRRUS_VRAM_SIZE` (4 MB) to validate framebuffer sizes. However, during PCI probe, the driver mapped BAR0 without verifying that its size matches `CIRRUS_VRAM_SIZE`. If a PCI device with a BAR0 smaller than 4 MB is bound to the driver, the mapped VRAM will be smaller than expected. Because validation checks assume 4 MB VRAM, framebuffers larger than the mapped memory can be created. When the display plane is updated (e.g. during release), `cirrus_primary_plane_helper_atomic_update()` copies the framebuffer to VRAM using `drm_fb_memcpy()`. Writing past the end of the mapped I/O memory causes a supervisor write page fault: BUG: unable to handle page fault for address: ffffc9000389c000 ... RIP: 0010:memcpy_toio+0x7c/0xe0 arch/x86/lib/iomem.c:110 ... Call Trace: iosys_map_memcpy_to include/linux/iosys-map.h:285 [inline] drm_fb_memcpy+0x325/0x5d0 drivers/gpu/drm/drm_format_helper.c:442 cirrus_primary_plane_helper_atomic_update+0x98a/0xb00 drivers/gpu/drm/tiny/cirrus-qemu.c:358 drm_atomic_helper_commit_planes+0x626/0xea0 drivers/gpu/drm/drm_atomic_helper.c:3038 drm_atomic_helper_commit_tail+0x60/0x510 drivers/gpu/drm/drm_atomic_helper.c:1989 commit_tail+0x2b1/0x3c0 drivers/gpu/drm/drm_atomic_helper.c:2074 drm_atomic_helper_commit+0xa77/0xb10 drivers/gpu/drm/drm_atomic_helper.c:2312 Fix this by validating in `cirrus_pci_probe()` that the PCI BAR0 resource is not less than `CIRRUS_VRAM_SIZE`, returning `-ENODEV` if it is less.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-98143 - accel: ethosu: Don't read the U65 rounding mode as a storage mode
CVE ID :CVE-2026-98143
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: accel: ethosu: Don't read the U65 rounding mode as a storage mode Bits 15:14 of NPU_SET_{IFM,OFM}_PRECISION select the activation storage mode on U85 only. On U65 the same field holds the rounding mode, and the command stream parser has read it as a storage mode since the driver was added. That went unnoticed while unknown values fell through the switch, but now that they are rejected, every U65 command stream that asks for natural rounding (2) fails CMDSTREAM_BO_CREATE with -EINVAL. Mesa emits it for average pooling, concatenation, split, unpack, strided slice, LUT and argmax, which is 72 failures of the Teflon test suite on an i.MX93. Truncating rounding (1) is misread as well: it picks the two-tile address path and computes a bogus feature map size from tile bases the command stream never set. Read the field as a storage mode only on the hardware where it is one.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-98143
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: accel: ethosu: Don't read the U65 rounding mode as a storage mode Bits 15:14 of NPU_SET_{IFM,OFM}_PRECISION select the activation storage mode on U85 only. On U65 the same field holds the rounding mode, and the command stream parser has read it as a storage mode since the driver was added. That went unnoticed while unknown values fell through the switch, but now that they are rejected, every U65 command stream that asks for natural rounding (2) fails CMDSTREAM_BO_CREATE with -EINVAL. Mesa emits it for average pooling, concatenation, split, unpack, strided slice, LUT and argmax, which is 72 failures of the Teflon test suite on an i.MX93. Truncating rounding (1) is misread as well: it picks the two-tile address path and computes a bogus feature map size from tile bases the command stream never set. Read the field as a storage mode only on the hardware where it is one.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-98144 - accel/amdxdna: put the chained BO when its mapping fails
CVE ID :CVE-2026-98144
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: put the chained BO when its mapping fails amdxdna_cmd_set_error() looks up the first BO of a command chain, which takes a reference, and drops it at the end of the function. The mapping of that BO is established in between, and the failure path returns without the put, so the reference is leaked. Ordinary use does not reach it. The chain has been submitted before any of this runs, so aie2_cmdlist_fill_slot() has already called amdxdna_cmd_get_op() on that BO and amdxdna_gem_vmap() has cached its address. What makes it reachable is that the BO is resolved again by handle here, and the handle is userspace's to recycle: closing it after submission and importing a dma-buf whose exporter implements no vmap onto the same id leaves amdxdna_gem_get_obj() returning an object this cannot map, since prime_import() types every import AMDXDNA_BO_SHARE.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-98144
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: put the chained BO when its mapping fails amdxdna_cmd_set_error() looks up the first BO of a command chain, which takes a reference, and drops it at the end of the function. The mapping of that BO is established in between, and the failure path returns without the put, so the reference is leaked. Ordinary use does not reach it. The chain has been submitted before any of this runs, so aie2_cmdlist_fill_slot() has already called amdxdna_cmd_get_op() on that BO and amdxdna_gem_vmap() has cached its address. What makes it reachable is that the BO is resolved again by handle here, and the handle is userspace's to recycle: closing it after submission and importing a dma-buf whose exporter implements no vmap onto the same id leaves amdxdna_gem_get_obj() returning an object this cannot map, since prime_import() types every import AMDXDNA_BO_SHARE.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-98145 - accel/amdxdna: reject a command chain that carries no commands
CVE ID :CVE-2026-98145
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: reject a command chain that carries no commands A chain whose command_count is zero passes the payload length check, because struct_size(payload, data, 0) is just the header. The fill loop then does not run, so offset stays zero and the request is submitted with a zero-length buffer. On firmware without AIE2_NPU_COMMAND that ends at the opcode check, since op is still ERT_INVALID_CMD and aie2_get_chain_msg_op() answers MSG_OP_MAX_OPCODE. aie2_get_npu_chain_msg_op() answers MSG_OP_CHAIN_EXEC_NPU whatever it is given, so there the submission continues to drm_clflush_virt_range(cmd_buf, 0), which reads the byte before the buffer and faults on the vmap guard page. EXEC_CMD is reachable by any process that can open the render node. Reject the request instead.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-98145
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: reject a command chain that carries no commands A chain whose command_count is zero passes the payload length check, because struct_size(payload, data, 0) is just the header. The fill loop then does not run, so offset stays zero and the request is submitted with a zero-length buffer. On firmware without AIE2_NPU_COMMAND that ends at the opcode check, since op is still ERT_INVALID_CMD and aie2_get_chain_msg_op() answers MSG_OP_MAX_OPCODE. aie2_get_npu_chain_msg_op() answers MSG_OP_CHAIN_EXEC_NPU whatever it is given, so there the submission continues to drm_clflush_virt_range(cmd_buf, 0), which reads the byte before the buffer and faults on the vmap guard page. EXEC_CMD is reachable by any process that can open the render node. Reject the request instead.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-98146 - accel/amdxdna: Remove __counted_by from struct amdxdna_cmd_chain
CVE ID :CVE-2026-98146
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Remove __counted_by from struct amdxdna_cmd_chain struct amdxdna_cmd_chain contains a flexible array annotated with __counted_by(command_count). Since the structure is stored in shared AMDXDNA_BO_SHARE memory, userspace can modify command_count concurrently. If command_count is changed to zero, the bounds check generated from __counted_by may fail and trigger a kernel panic. Remove __counted_by to avoid relying on the userspace-controlled command_count for the flexible array bounds check.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-98146
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Remove __counted_by from struct amdxdna_cmd_chain struct amdxdna_cmd_chain contains a flexible array annotated with __counted_by(command_count). Since the structure is stored in shared AMDXDNA_BO_SHARE memory, userspace can modify command_count concurrently. If command_count is changed to zero, the bounds check generated from __counted_by may fail and trigger a kernel panic. Remove __counted_by to avoid relying on the userspace-controlled command_count for the flexible array bounds check.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-98147 - printk: Don't WARN on kthread_run failure.
CVE ID :CVE-2026-98147
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: printk: Don't WARN on kthread_run failure. Since __kthread_create_on_node() returns -EINTR upon SIGKILL, we should not use WARN_ON() in order to catch kthread_run() failure.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-98147
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: printk: Don't WARN on kthread_run failure. Since __kthread_create_on_node() returns -EINTR upon SIGKILL, we should not use WARN_ON() in order to catch kthread_run() failure.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-98148 - drm/gud: validate GUD_ROTATION_0 is present in supported rotations
CVE ID :CVE-2026-98148
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: drm/gud: validate GUD_ROTATION_0 is present in supported rotations The rotation argument to drm_plane_create_rotation_property() is set to DRM_MODE_ROTATE_0, and the device reported rotation bitmask is used as the supported_rotations argument. The driver never validates that GUD_ROTATION_0 is present, so a device that omits it from its GUD_PROPERTY_ROTATION triggers the WARN_ON(rotation & ~supported_rotations) in drm_plane_create_rotation_property() Fix this by skipping the creation of rotation property if the device doesn't have the GUD_ROTATION_0 bit
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-98148
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: drm/gud: validate GUD_ROTATION_0 is present in supported rotations The rotation argument to drm_plane_create_rotation_property() is set to DRM_MODE_ROTATE_0, and the device reported rotation bitmask is used as the supported_rotations argument. The driver never validates that GUD_ROTATION_0 is present, so a device that omits it from its GUD_PROPERTY_ROTATION triggers the WARN_ON(rotation & ~supported_rotations) in drm_plane_create_rotation_property() Fix this by skipping the creation of rotation property if the device doesn't have the GUD_ROTATION_0 bit
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-98149 - bpf: Fix percpu map update indexing with sparse CPU IDs
CVE ID :CVE-2026-98149
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: bpf: Fix percpu map update indexing with sparse CPU IDs Per-CPU array, hash, and cgroup storage map updates without BPF_F_CPU or BPF_F_ALL_CPUS use a value buffer whose per-CPU slots are packed in possible-CPU order. The buffer is sized as: round_up(value_size, 8) * num_possible_cpus() The update paths iterate over possible CPUs, but use the logical CPU ID to calculate the source offset: value + size * cpu This only works when possible CPU IDs are contiguous starting at zero. For example, with a possible CPU mask of 0,2-3, the buffer contains three slots corresponding to CPUs 0, 2, and 3. CPU2 is therefore expected to use slot 1 and CPU3 slot 2. Instead, the current code uses slots 2 and 3 respectively, causing incorrect per-CPU values and an out-of-bounds read from the update buffer for CPU3. The corresponding lookup paths already use a dense offset while iterating over possible CPUs. Do the same for the array, hash, and cgroup storage update paths, advancing the source offset once for each possible CPU. BPF_F_ALL_CPUS continues to use the same value for every CPU.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-98149
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: bpf: Fix percpu map update indexing with sparse CPU IDs Per-CPU array, hash, and cgroup storage map updates without BPF_F_CPU or BPF_F_ALL_CPUS use a value buffer whose per-CPU slots are packed in possible-CPU order. The buffer is sized as: round_up(value_size, 8) * num_possible_cpus() The update paths iterate over possible CPUs, but use the logical CPU ID to calculate the source offset: value + size * cpu This only works when possible CPU IDs are contiguous starting at zero. For example, with a possible CPU mask of 0,2-3, the buffer contains three slots corresponding to CPUs 0, 2, and 3. CPU2 is therefore expected to use slot 1 and CPU3 slot 2. Instead, the current code uses slots 2 and 3 respectively, causing incorrect per-CPU values and an out-of-bounds read from the update buffer for CPU3. The corresponding lookup paths already use a dense offset while iterating over possible CPUs. Do the same for the array, hash, and cgroup storage update paths, advancing the source offset once for each possible CPU. BPF_F_ALL_CPUS continues to use the same value for every CPU.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-98150 - bpf: Fix BPF_F_CPU validation for sparse CPU IDs
CVE ID :CVE-2026-98150
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: bpf: Fix BPF_F_CPU validation for sparse CPU IDs BPF_F_CPU stores the target CPU ID in the upper 32 bits of the map operation flags. bpf_map_check_op_flags() currently compares that ID with num_possible_cpus(), which is the number of possible CPUs rather than a bound on CPU IDs. On an arm64 QEMU guest with a CPU device-tree hole, the possible CPU mask was 0,2-3. A userspace program using raw bpf() syscalls creates a BPF_MAP_TYPE_PERCPU_ARRAY and performs update and lookup operations for each CPU by setting BPF_F_CPU and the CPU ID in the flags. With the old check, CPU 1 is incorrectly accepted while valid CPU 3 is rejected with -ERANGE. The CPU 1 update then reaches the per-CPU map access path and triggers: Unable to handle kernel paging request at virtual address ... pc : __pi_memcpy_generic+0x5c/0x22c lr : bpf_percpu_array_update+0x2dc/0x2e8 Call trace: __pi_memcpy_generic bpf_map_update_value map_update_elem __sys_bpf Check the CPU ID against nr_cpu_ids and cpu_possible() instead. This rejects CPU IDs outside the valid range and CPUs absent from the possible mask, while allowing valid sparse CPU IDs.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-98150
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: bpf: Fix BPF_F_CPU validation for sparse CPU IDs BPF_F_CPU stores the target CPU ID in the upper 32 bits of the map operation flags. bpf_map_check_op_flags() currently compares that ID with num_possible_cpus(), which is the number of possible CPUs rather than a bound on CPU IDs. On an arm64 QEMU guest with a CPU device-tree hole, the possible CPU mask was 0,2-3. A userspace program using raw bpf() syscalls creates a BPF_MAP_TYPE_PERCPU_ARRAY and performs update and lookup operations for each CPU by setting BPF_F_CPU and the CPU ID in the flags. With the old check, CPU 1 is incorrectly accepted while valid CPU 3 is rejected with -ERANGE. The CPU 1 update then reaches the per-CPU map access path and triggers: Unable to handle kernel paging request at virtual address ... pc : __pi_memcpy_generic+0x5c/0x22c lr : bpf_percpu_array_update+0x2dc/0x2e8 Call trace: __pi_memcpy_generic bpf_map_update_value map_update_elem __sys_bpf Check the CPU ID against nr_cpu_ids and cpu_possible() instead. This rejects CPU IDs outside the valid range and CPUs absent from the possible mask, while allowing valid sparse CPU IDs.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-98151 - bpf: Fix REG INVARIANTS VIOLATION on speculative pointer arithmetic
CVE ID :CVE-2026-98151
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: bpf: Fix REG INVARIANTS VIOLATION on speculative pointer arithmetic Take the following unprivileged program as an example: r0 = bpf_map_lookup_elem(...) /* PTR_TO_MAP_VALUE, offset 0 */ ... 14: r0 += r1 /* r1 is a bounded scalar */ 15: r9 = r0 Loading it triggers a verifier warning from reg_bounds_sanity_check(): verifier bug: REG INVARIANTS VIOLATION (alu): const subreg tnum out of sync with range bounds r64={.base=0x0, .size=0x0} r32={.base=0x0, .size=0xffffffff} var_off=(0x0, 0x0) What happens: 1. Processing insn 14 (r0 += r1) in adjust_ptr_min_max_vals(), the new offset is computed into dst_reg's var_off and 32/64-bit ranges. 2. Because pointer registers do not track 32-bit subregister bounds, __mark_reg32_unbounded() first sets r32 to the full range; r32 is re-derived from the offset at the end of the function by reg_bounds_sync(). 3. On the unprivileged path, sanitize_ptr_alu() is called and, via sanitize_speculative_path() -> push_stack(), snapshots the current register state and schedules the next instruction (insn 15) to be verified directly as a speculative path. 4. That snapshot is taken between step 2 and the final reg_bounds_sync(): at this point dst_reg's var_off still holds the (const) original offset while r32 has just been blanked to the full range, i.e. the two are out of sync. When the speculative path later verifies insn 15 (r9 = r0), the inconsistent state reaches reg_bounds_sanity_check() and trips the warning. var_off and the 32-bit range must always be consistent. There are two ways to keep the snapshot consistent: 1. sync var_off and r32 before the snapshot so they match, or 2. leave r32 at its original (already consistent) value and blank it only after the snapshot. The whole point of sanitize_ptr_alu() is to insert a harmless masking sequence that keeps the access in bounds under speculation, so the state it snapshots should faithfully represent that. Take approach 2: move __mark_reg32_unbounded() to after sanitize_ptr_alu(), so the speculative snapshot keeps the pointer's original, consistent r32. The non-speculative path is unchanged: r32 is still blanked before the offset is applied and re-derived by reg_bounds_sync().
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-98151
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: bpf: Fix REG INVARIANTS VIOLATION on speculative pointer arithmetic Take the following unprivileged program as an example: r0 = bpf_map_lookup_elem(...) /* PTR_TO_MAP_VALUE, offset 0 */ ... 14: r0 += r1 /* r1 is a bounded scalar */ 15: r9 = r0 Loading it triggers a verifier warning from reg_bounds_sanity_check(): verifier bug: REG INVARIANTS VIOLATION (alu): const subreg tnum out of sync with range bounds r64={.base=0x0, .size=0x0} r32={.base=0x0, .size=0xffffffff} var_off=(0x0, 0x0) What happens: 1. Processing insn 14 (r0 += r1) in adjust_ptr_min_max_vals(), the new offset is computed into dst_reg's var_off and 32/64-bit ranges. 2. Because pointer registers do not track 32-bit subregister bounds, __mark_reg32_unbounded() first sets r32 to the full range; r32 is re-derived from the offset at the end of the function by reg_bounds_sync(). 3. On the unprivileged path, sanitize_ptr_alu() is called and, via sanitize_speculative_path() -> push_stack(), snapshots the current register state and schedules the next instruction (insn 15) to be verified directly as a speculative path. 4. That snapshot is taken between step 2 and the final reg_bounds_sync(): at this point dst_reg's var_off still holds the (const) original offset while r32 has just been blanked to the full range, i.e. the two are out of sync. When the speculative path later verifies insn 15 (r9 = r0), the inconsistent state reaches reg_bounds_sanity_check() and trips the warning. var_off and the 32-bit range must always be consistent. There are two ways to keep the snapshot consistent: 1. sync var_off and r32 before the snapshot so they match, or 2. leave r32 at its original (already consistent) value and blank it only after the snapshot. The whole point of sanitize_ptr_alu() is to insert a harmless masking sequence that keeps the access in bounds under speculation, so the state it snapshots should faithfully represent that. Take approach 2: move __mark_reg32_unbounded() to after sanitize_ptr_alu(), so the speculative snapshot keeps the pointer's original, consistent r32. The non-speculative path is unchanged: r32 is still blanked before the offset is applied and re-derived by reg_bounds_sync().
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-98152 - nvmet-rdma: fix queue leak when connect backlog is exceeded
CVE ID :CVE-2026-98152
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: fix queue leak when connect backlog is exceeded When pending disconnecting queues exceed the backlog limit, the connect path only drops the device reference and leaks the newly allocated queue and its IB resources.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-98152
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: fix queue leak when connect backlog is exceeded When pending disconnecting queues exceed the backlog limit, the connect path only drops the device reference and leaks the newly allocated queue and its IB resources.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-98153 - nvme: fix racy access to FDP placement id array
CVE ID :CVE-2026-98153
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: nvme: fix racy access to FDP placement id array nvme_query_fdp_info() is called per-path and therefore prone to races. It populates head->nr_plids/head->plids for fdp registration. But nothing protects that pair from concurrent access - two paths scanning the same namespace can race to populate it. Avoid the race by moving this initialization work to nvme_alloc_ns_head() which is called once per shared namespace.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-98153
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: nvme: fix racy access to FDP placement id array nvme_query_fdp_info() is called per-path and therefore prone to races. It populates head->nr_plids/head->plids for fdp registration. But nothing protects that pair from concurrent access - two paths scanning the same namespace can race to populate it. Avoid the race by moving this initialization work to nvme_alloc_ns_head() which is called once per shared namespace.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-98154 - nvme-rdma: fix -EIO cleanup order in queue_rq
CVE ID :CVE-2026-98154
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: nvme-rdma: fix -EIO cleanup order in queue_rq On -EIO, the RDMA queue_rq path reports a host path error and then still cleans up the command and unmaps the SQE DMA. The path error helper completes the request, so that is double cleanup and DMA unmap after the request is already complete. Unmap the SQE first, then report the host path error. Skip the outer command cleanup on that path.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-98154
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: nvme-rdma: fix -EIO cleanup order in queue_rq On -EIO, the RDMA queue_rq path reports a host path error and then still cleans up the command and unmaps the SQE DMA. The path error helper completes the request, so that is double cleanup and DMA unmap after the request is already complete. Unmap the SQE first, then report the host path error. Skip the outer command cleanup on that path.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-98155 - accel/qaic: Address potential out-of-bounds read in resp_worker()
CVE ID :CVE-2026-98155
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: accel/qaic: Address potential out-of-bounds read in resp_worker() Although 'commit 2feec5ae5df7 ("accel/qaic: Handle DBC deactivation if the owner went away")' fixes the scenario it was intended for by walking the message and only decoding QAIC_TRANS_DEACTIVATE_FROM_DEV, if present, it skipped over the bounds checking code that is included in decode_message(). This could lead to issues such as reading past the slab allocation's end, infinite loops or kernel panics. For those issues to happen, a malformed wire message is needed to be sent from the device. Instead of duplicating the bounds checking code already present in decode_message(), use the function inside resp_worker().
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-98155
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: accel/qaic: Address potential out-of-bounds read in resp_worker() Although 'commit 2feec5ae5df7 ("accel/qaic: Handle DBC deactivation if the owner went away")' fixes the scenario it was intended for by walking the message and only decoding QAIC_TRANS_DEACTIVATE_FROM_DEV, if present, it skipped over the bounds checking code that is included in decode_message(). This could lead to issues such as reading past the slab allocation's end, infinite loops or kernel panics. For those issues to happen, a malformed wire message is needed to be sent from the device. Instead of duplicating the bounds checking code already present in decode_message(), use the function inside resp_worker().
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-98156 - drm/virtio: use the DMA API for resource backing on Xen
CVE ID :CVE-2026-98156
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: drm/virtio: use the DMA API for resource backing on Xen On a Xen PV domain page addresses bear no relation to the real machine addresses the host would have to use to reach it. virtio_ring.c handles this correctly, vring_use_map_api() returns true for any xen_domain() regardless of VIRTIO_F_ACCESS_PLATFORM. virtio-gpu makes the same decision independently, but its copy looks only at the feature bit: bool use_dma_api = !virtio_has_dma_quirk(vgdev->vdev); QEMU does not set iommu_platform on virtio-vga by default, so VIRTIO_F_ACCESS_PLATFORM is not negotiated, use_dma_api is false, and virtio_gpu_object_shmem_init() describes the framebuffer's backing pages to the host with sg_phys(). Those are guest-physical addresses. In a PV domain they resolve, on the host side, to pages belonging to some other domain, so the host scans out unrelated memory. Move the decision into virtio_gpu_use_dma_api() and give it the xen_domain() check, like vring_use_map_api() has. This additionally enables the dma_sync_sgtable_for_device() calls in virtgpu_vq.c, which are required for correctness whenever swiotlb is in play. Reproduced with a Xen 4.21 PV dom0 nested inside QEMU 8.2 with virtio-vga, on both a distro 6.8 kernel and 6.18 LTS. A PVH dom0 works fine and doesn't need this fix because it is identity-mapped, only PV dom0s are affected.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-98156
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: drm/virtio: use the DMA API for resource backing on Xen On a Xen PV domain page addresses bear no relation to the real machine addresses the host would have to use to reach it. virtio_ring.c handles this correctly, vring_use_map_api() returns true for any xen_domain() regardless of VIRTIO_F_ACCESS_PLATFORM. virtio-gpu makes the same decision independently, but its copy looks only at the feature bit: bool use_dma_api = !virtio_has_dma_quirk(vgdev->vdev); QEMU does not set iommu_platform on virtio-vga by default, so VIRTIO_F_ACCESS_PLATFORM is not negotiated, use_dma_api is false, and virtio_gpu_object_shmem_init() describes the framebuffer's backing pages to the host with sg_phys(). Those are guest-physical addresses. In a PV domain they resolve, on the host side, to pages belonging to some other domain, so the host scans out unrelated memory. Move the decision into virtio_gpu_use_dma_api() and give it the xen_domain() check, like vring_use_map_api() has. This additionally enables the dma_sync_sgtable_for_device() calls in virtgpu_vq.c, which are required for correctness whenever swiotlb is in play. Reproduced with a Xen 4.21 PV dom0 nested inside QEMU 8.2 with virtio-vga, on both a distro 6.8 kernel and 6.18 LTS. A PVH dom0 works fine and doesn't need this fix because it is identity-mapped, only PV dom0s are affected.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-98157 - EDAC/device_sysfs: Use kstrtouint() for poll_msec to prevent truncation
CVE ID :CVE-2026-98157
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: EDAC/device_sysfs: Use kstrtouint() for poll_msec to prevent truncation The poll_msec sysfs store file uses simple_strtoul() which accepts an unsigned long, but the target field (poll_msec) is unsigned int. On 64-bit systems, a value > UINT_MAX is silently truncated when stored. Fix the mismatch by using kstrtouint() instead. This rejects values larger than UINT_MAX at parse time, making truncation impossible. Also add a check for value < 1 to reject the 0-delay case, which would cause the poll work to spin without delay and consume 100% CPU.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-98157
Published : Sept. 25, 2026, 10:36 a.m. | 48 minutes ago
Description :In the Linux kernel, the following vulnerability has been resolved: EDAC/device_sysfs: Use kstrtouint() for poll_msec to prevent truncation The poll_msec sysfs store file uses simple_strtoul() which accepts an unsigned long, but the target field (poll_msec) is unsigned int. On 64-bit systems, a value > UINT_MAX is silently truncated when stored. Fix the mismatch by using kstrtouint() instead. This rejects values larger than UINT_MAX at parse time, making truncation impossible. Also add a check for value < 1 to reject the 0-delay case, which would cause the poll work to spin without delay and consume 100% CPU.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...