CVE-2026-93201 - dm-pcache: validate seg_id fields from persistent memory
CVE ID :CVE-2026-93201
Published : Sept. 17, 2026, 5:18 p.m. | 1 hour ago
Description :In the Linux kernel, the following vulnerability has been resolved: dm-pcache: validate seg_id fields from persistent memory cache_pos_decode(), cache_key_decode() and the last-kset branches of cache_replay(), the writeback worker and the GC worker take a cache segment id from the cache device metadata and index cache->segments[] with it without checking it against cache->n_segs. That metadata is only CRC-protected with a fixed public seed, so whoever supplies the cache device on a table load (CAP_SYS_ADMIN) controls the id; an out-of-range value forms a wild pcache_cache_segment pointer that is dereferenced and written through -- an out-of-bounds read and write driven by on-disk data. Add cache_seg_id_valid() and reject an out-of-range id at each decode site, failing the operation with -EIO instead of indexing past the array. Bound the id against the initialized-segment count (cache_info.n_segs) rather than the physical device total. A forged cache_info.n_segs below seg_num otherwise leaves segments[cache_info.n_segs..seg_num) as zeroed structs whose data pointer is NULL, so a forged id in that window would still be dereferenced. A later patch guarantees cache_info.n_segs <= seg_num, and a driver-created cache sets the two equal, so valid images are unaffected.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-93201
Published : Sept. 17, 2026, 5:18 p.m. | 1 hour ago
Description :In the Linux kernel, the following vulnerability has been resolved: dm-pcache: validate seg_id fields from persistent memory cache_pos_decode(), cache_key_decode() and the last-kset branches of cache_replay(), the writeback worker and the GC worker take a cache segment id from the cache device metadata and index cache->segments[] with it without checking it against cache->n_segs. That metadata is only CRC-protected with a fixed public seed, so whoever supplies the cache device on a table load (CAP_SYS_ADMIN) controls the id; an out-of-range value forms a wild pcache_cache_segment pointer that is dereferenced and written through -- an out-of-bounds read and write driven by on-disk data. Add cache_seg_id_valid() and reject an out-of-range id at each decode site, failing the operation with -EIO instead of indexing past the array. Bound the id against the initialized-segment count (cache_info.n_segs) rather than the physical device total. A forged cache_info.n_segs below seg_num otherwise leaves segments[cache_info.n_segs..seg_num) as zeroed structs whose data pointer is NULL, so a forged id in that window would still be dereferenced. A later patch guarantees cache_info.n_segs <= seg_num, and a driver-created cache sets the two equal, so valid images are unaffected.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-93202 - i3c: master: Fix recursive locking during device registration
CVE ID :CVE-2026-93202
Published : Sept. 17, 2026, 5:18 p.m. | 1 hour ago
Description :In the Linux kernel, the following vulnerability has been resolved: i3c: master: Fix recursive locking during device registration i3c_master_register_new_i3c_devs() registers newly discovered devices while holding i3c_bus_normaluse_lock(), a down_read(). device_register() can immediately probe the device, and probe callbacks typically invoke I3C helpers that take i3c_bus_normaluse_lock() again, leading to a recursive acquisition of the same rwsem. rwsems do not support recursive read locking and can deadlock when a writer is waiting. See the "Recursive read locks" section of Documentation/locking/lockdep-design.rst. For example, with Intel LPSS I3C, LOCKDEP generates a WARNING like: # echo intel-lpss-i3c.0 > /sys/bus/platform/drivers/mipi-i3c-hci/unbind # echo intel-lpss-i3c.0 > /sys/bus/platform/drivers/mipi-i3c-hci/bind WARNING: possible recursive locking detected kworker/5:1/94 is trying to acquire lock: ffff88811c810d78 (&i3cbus->lock){++++}-{4:4}, at: i3c_device_match_id+0x45/0x370 but task is already holding lock: ffff88811c810d78 (&i3cbus->lock){++++}-{4:4}, at: i3c_master_reg_work_fn+0x21/0x5f0 Fix this by separating device creation from device registration. Populate desc->dev under the maintenance lock, collect the devices that still need registration into a local list, then release the lock before calling device_register(). Finally retake the lock and clean up any devices that failed to register. Use the maintenance lock rather than the normal-use lock while adding device objects. A write-side maintenance lock prevents readers from observing a partially initialized desc->dev during initial device population, or desc->dev disappearing if registration fails. The local list requires a list node, so add a list node member to struct i3c_device.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-93202
Published : Sept. 17, 2026, 5:18 p.m. | 1 hour ago
Description :In the Linux kernel, the following vulnerability has been resolved: i3c: master: Fix recursive locking during device registration i3c_master_register_new_i3c_devs() registers newly discovered devices while holding i3c_bus_normaluse_lock(), a down_read(). device_register() can immediately probe the device, and probe callbacks typically invoke I3C helpers that take i3c_bus_normaluse_lock() again, leading to a recursive acquisition of the same rwsem. rwsems do not support recursive read locking and can deadlock when a writer is waiting. See the "Recursive read locks" section of Documentation/locking/lockdep-design.rst. For example, with Intel LPSS I3C, LOCKDEP generates a WARNING like: # echo intel-lpss-i3c.0 > /sys/bus/platform/drivers/mipi-i3c-hci/unbind # echo intel-lpss-i3c.0 > /sys/bus/platform/drivers/mipi-i3c-hci/bind WARNING: possible recursive locking detected kworker/5:1/94 is trying to acquire lock: ffff88811c810d78 (&i3cbus->lock){++++}-{4:4}, at: i3c_device_match_id+0x45/0x370 but task is already holding lock: ffff88811c810d78 (&i3cbus->lock){++++}-{4:4}, at: i3c_master_reg_work_fn+0x21/0x5f0 Fix this by separating device creation from device registration. Populate desc->dev under the maintenance lock, collect the devices that still need registration into a local list, then release the lock before calling device_register(). Finally retake the lock and clean up any devices that failed to register. Use the maintenance lock rather than the normal-use lock while adding device objects. A write-side maintenance lock prevents readers from observing a partially initialized desc->dev during initial device population, or desc->dev disappearing if registration fails. The local list requires a list node, so add a list node member to struct i3c_device.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-93203 - batman-adv: bla: avoid CRC corruption due to parallel claim add
CVE ID :CVE-2026-93203
Published : Sept. 17, 2026, 5:18 p.m. | 1 hour ago
Description :In the Linux kernel, the following vulnerability has been resolved: batman-adv: bla: avoid CRC corruption due to parallel claim add batadv_bla_add_claim() is used to add claims and modify the backbone of claims for CLAIM frames from remote backbones and local packets. When it handles a claim, it needs to either * add the new claim's CRC to the backbone CRC * remove the already existing claim's CRC from the old backbone and add it to the new backbone But when the "new" claim code was running in parallel to the "change backbone" code, it can happen that the CRC was invalid because the backbone_gw of the claim was changed twice in the "new" claim code path: * CPU0 creates the claim for gateway A and publishes it in the claim hash. The crc16 of the address has not yet been added to A's crc at this point. * CPU1 processes a claim frame of gateway B for the same client, finds the just published claim, and performs the ownership change: it switches the pointer to B, removes the crc16 from A's crc - which never contained it - and adds it to B's crc. * CPU0 continues behind the creation branch, unconditionally switches the pointer back to A without compensating B's crc (its remove_crc is false for the creation path), and finally adds the crc16 to A's crc The CRC is then wrong for both: * claim belongs to A: but CRC is not part of backbone A's CRC * claim doesn't belong to B: CRC is still part of backbone B's CRC This wrong CRC is never recomputated from the stored claims. For local backbone claims, this can also not recovered using syncs. To avoid this, split the functionality in clear separate parts: * new claim which always adds claim CRC to the backbone CRC (but never changes the already set backbone_gw of the claim back) * update of existing claim which automatically changes the backbone_gw entry and only updates both backbone CRCs when there was an actual change
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-93203
Published : Sept. 17, 2026, 5:18 p.m. | 1 hour ago
Description :In the Linux kernel, the following vulnerability has been resolved: batman-adv: bla: avoid CRC corruption due to parallel claim add batadv_bla_add_claim() is used to add claims and modify the backbone of claims for CLAIM frames from remote backbones and local packets. When it handles a claim, it needs to either * add the new claim's CRC to the backbone CRC * remove the already existing claim's CRC from the old backbone and add it to the new backbone But when the "new" claim code was running in parallel to the "change backbone" code, it can happen that the CRC was invalid because the backbone_gw of the claim was changed twice in the "new" claim code path: * CPU0 creates the claim for gateway A and publishes it in the claim hash. The crc16 of the address has not yet been added to A's crc at this point. * CPU1 processes a claim frame of gateway B for the same client, finds the just published claim, and performs the ownership change: it switches the pointer to B, removes the crc16 from A's crc - which never contained it - and adds it to B's crc. * CPU0 continues behind the creation branch, unconditionally switches the pointer back to A without compensating B's crc (its remove_crc is false for the creation path), and finally adds the crc16 to A's crc The CRC is then wrong for both: * claim belongs to A: but CRC is not part of backbone A's CRC * claim doesn't belong to B: CRC is still part of backbone B's CRC This wrong CRC is never recomputated from the stored claims. For local backbone claims, this can also not recovered using syncs. To avoid this, split the functionality in clear separate parts: * new claim which always adds claim CRC to the backbone CRC (but never changes the already set backbone_gw of the claim back) * update of existing claim which automatically changes the backbone_gw entry and only updates both backbone CRCs when there was an actual change
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-93204 - batman-adv: dat: atomically update mac addresses
CVE ID :CVE-2026-93204
Published : Sept. 17, 2026, 5:18 p.m. | 1 hour ago
Description :In the Linux kernel, the following vulnerability has been resolved: batman-adv: dat: atomically update mac addresses When a MAC address is updated in batadv_dat_entry_add(), it is done using a simple copy function. A parallel reader might only see parts of this update. In worst case, the reader is transporting the half updated MAC address over the network or is creating an ARP response using it - poisoning the ARP cache. atomic64_t can be used to store the 48 bit of a mac address. A reader will then either see the old mac address or the new one - never a mixture of both.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-93204
Published : Sept. 17, 2026, 5:18 p.m. | 1 hour ago
Description :In the Linux kernel, the following vulnerability has been resolved: batman-adv: dat: atomically update mac addresses When a MAC address is updated in batadv_dat_entry_add(), it is done using a simple copy function. A parallel reader might only see parts of this update. In worst case, the reader is transporting the half updated MAC address over the network or is creating an ARP response using it - poisoning the ARP cache. atomic64_t can be used to store the 48 bit of a mac address. A reader will then either see the old mac address or the new one - never a mixture of both.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-93292 - SigNoz 0.88.0 before 0.142.1 - SQL Injection in Trace Funnel Analytics Query Builders
CVE ID :CVE-2026-93292
Published : Sept. 17, 2026, 5:18 p.m. | 1 hour ago
Description :SigNoz versions from 0.88.0 before 0.142.1 contain a SQL injection vulnerability in trace-funnel analytics endpoints that interpolate service_name and span_name fields into ClickHouse string literals without escaping. Authenticated attackers can inject SQL through funnel step definitions to execute arbitrary queries and read results in HTTP responses.
Severity: 8.5 | HIGH
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-93292
Published : Sept. 17, 2026, 5:18 p.m. | 1 hour ago
Description :SigNoz versions from 0.88.0 before 0.142.1 contain a SQL injection vulnerability in trace-funnel analytics endpoints that interpolate service_name and span_name fields into ClickHouse string literals without escaping. Authenticated attackers can inject SQL through funnel step definitions to execute arbitrary queries and read results in HTTP responses.
Severity: 8.5 | HIGH
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-93295 - MISP Background Job Argument Injection via Console Path Switches Enables Remote Code Execution
CVE ID :CVE-2026-93295
Published : Sept. 17, 2026, 5:18 p.m. | 1 hour ago
Description :MISP contains a vulnerability in its background job dispatch mechanism that allows remote code execution as the web user. Background job arguments are passed directly as the argv of the CakePHP console process. CakePHP's ShellDispatcher::_parsePaths() scans the entire argv for path switches (-app, --app, -working, --working, -root, --root, -webroot, --webroot) and uses the following element as the application root. The events/contact endpoint passes user-controlled fields (message and person) into job arguments without validation. An attacker who can submit the contact form can set the person field to a reserved switch (e.g., -app) and the message field to a phar:// URI pointing to a malicious archive. The CakePHP bootstrap then includes Config/core.php from within that archive, executing attacker-controlled PHP code with the privileges of the web user. The vulnerability requires the ability to submit the events/contact form (or any other endpoint that forwards user input into background job arguments). No special timing or race condition is required; the attack is deterministic once the crafted parameters are accepted. The impact is full remote code execution in the context of the MISP web server process, allowing data exfiltration, persistence, and lateral movement within the host.
Severity: 5.1 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-93295
Published : Sept. 17, 2026, 5:18 p.m. | 1 hour ago
Description :MISP contains a vulnerability in its background job dispatch mechanism that allows remote code execution as the web user. Background job arguments are passed directly as the argv of the CakePHP console process. CakePHP's ShellDispatcher::_parsePaths() scans the entire argv for path switches (-app, --app, -working, --working, -root, --root, -webroot, --webroot) and uses the following element as the application root. The events/contact endpoint passes user-controlled fields (message and person) into job arguments without validation. An attacker who can submit the contact form can set the person field to a reserved switch (e.g., -app) and the message field to a phar:// URI pointing to a malicious archive. The CakePHP bootstrap then includes Config/core.php from within that archive, executing attacker-controlled PHP code with the privileges of the web user. The vulnerability requires the ability to submit the events/contact form (or any other endpoint that forwards user input into background job arguments). No special timing or race condition is required; the attack is deterministic once the crafted parameters are accepted. The impact is full remote code execution in the context of the MISP web server process, allowing data exfiltration, persistence, and lateral movement within the host.
Severity: 5.1 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-93296 - MISP Overmind: Stored Cross-Site Scripting via Unescaped Object Names in Statistics Legends
CVE ID :CVE-2026-93296
Published : Sept. 17, 2026, 5:18 p.m. | 1 hour ago
Description :MISP contains a stored cross-site scripting (XSS) vulnerability in the Overmind theme's statistics views. The event General card (event_general.ctp) and the server/feed preview card (preview_general.ctp) constructed donut chart legend labels by directly concatenating object name or category keys into an innerHTML string without HTML-encoding. Because MISP object names (e.g., attribute names, event names, or server/feed identifiers) are user-controllable by any authenticated user with sufficient permissions to create or modify such objects, an attacker could craft a name containing malicious markup (for example, a script tag or event-handler attribute). When any other user viewed the affected Overmind dashboard, the injected markup would be interpreted as live HTML/JavaScript in the victim's browser, executing in the context of the MISP application origin. This could allow session hijacking, data exfiltration, or arbitrary actions performed on behalf of the victim. The vulnerability requires the attacker to have low-level authenticated access to create or rename an object whose name is rendered in the legend, and the victim to view the Overmind event or server preview page. No special browser conditions or race conditions are required.
Severity: 5.1 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-93296
Published : Sept. 17, 2026, 5:18 p.m. | 1 hour ago
Description :MISP contains a stored cross-site scripting (XSS) vulnerability in the Overmind theme's statistics views. The event General card (event_general.ctp) and the server/feed preview card (preview_general.ctp) constructed donut chart legend labels by directly concatenating object name or category keys into an innerHTML string without HTML-encoding. Because MISP object names (e.g., attribute names, event names, or server/feed identifiers) are user-controllable by any authenticated user with sufficient permissions to create or modify such objects, an attacker could craft a name containing malicious markup (for example, a script tag or event-handler attribute). When any other user viewed the affected Overmind dashboard, the injected markup would be interpreted as live HTML/JavaScript in the victim's browser, executing in the context of the MISP application origin. This could allow session hijacking, data exfiltration, or arbitrary actions performed on behalf of the victim. The vulnerability requires the attacker to have low-level authenticated access to create or rename an object whose name is rendered in the legend, and the victim to view the Overmind event or server preview page. No special browser conditions or race conditions are required.
Severity: 5.1 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-9314 - Rejected reason: This CVE ID has been rejected or
CVE ID :CVE-2026-9314
Published : Sept. 17, 2026, 5:18 p.m. | 1 hour ago
Description :Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-9314
Published : Sept. 17, 2026, 5:18 p.m. | 1 hour ago
Description :Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-92926 - code-projects Matrimonial System partner_preference.php writepartnerprefs sql injection
CVE ID :CVE-2026-92926
Published : Sept. 17, 2026, 5:30 p.m. | 48 minutes ago
Description :A vulnerability has been found in code-projects Matrimonial System 1.0. This vulnerability affects the function writepartnerprefs of the file /partner_preference.php. Such manipulation of the argument education leads to sql injection. The attack can be executed remotely. The exploit has been disclosed to the public and may be used.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-92926
Published : Sept. 17, 2026, 5:30 p.m. | 48 minutes ago
Description :A vulnerability has been found in code-projects Matrimonial System 1.0. This vulnerability affects the function writepartnerprefs of the file /partner_preference.php. Such manipulation of the argument education leads to sql injection. The attack can be executed remotely. The exploit has been disclosed to the public and may be used.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-89038 - Verizon Cloud for Android < 26.7.10 Path Traversal via OneTouchUploadActivity
CVE ID :CVE-2026-89038
Published : Sept. 17, 2026, 5:30 p.m. | 47 minutes ago
Description :Verizon Cloud for Android (com.vcast.mediamanager) before 26.7.10 contains a path traversal vulnerability that allows co-resident malicious applications to write attacker-controlled bytes outside the intended staging directory by supplying a crafted _display_name value containing path-traversal sequences through exported activities OneTouchUploadActivity and PrintShopCloudActivity. Attackers can exploit the unsanitized filename concatenation in the file-staging sink via ACTION_SEND or ACTION_SEND_MULTIPLE intents to achieve arbitrary file write and inject attacker-controlled content into the authenticated user's Verizon Cloud account without user interaction.
Severity: 6.9 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-89038
Published : Sept. 17, 2026, 5:30 p.m. | 47 minutes ago
Description :Verizon Cloud for Android (com.vcast.mediamanager) before 26.7.10 contains a path traversal vulnerability that allows co-resident malicious applications to write attacker-controlled bytes outside the intended staging directory by supplying a crafted _display_name value containing path-traversal sequences through exported activities OneTouchUploadActivity and PrintShopCloudActivity. Attackers can exploit the unsanitized filename concatenation in the file-staging sink via ACTION_SEND or ACTION_SEND_MULTIPLE intents to achieve arbitrary file write and inject attacker-controlled content into the authenticated user's Verizon Cloud account without user interaction.
Severity: 6.9 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-92927 - SourceCodester Drug Recommendation System drug_recommendor.sql information disclosure
CVE ID :CVE-2026-92927
Published : Sept. 17, 2026, 5:45 p.m. | 33 minutes ago
Description :A vulnerability was found in SourceCodester Drug Recommendation System 1.0. This issue affects some unknown processing of the file /db/drug_recommendor.sql. Performing a manipulation results in information disclosure. The attack is possible to be carried out remotely. The exploit has been made public and could be used.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-92927
Published : Sept. 17, 2026, 5:45 p.m. | 33 minutes ago
Description :A vulnerability was found in SourceCodester Drug Recommendation System 1.0. This issue affects some unknown processing of the file /db/drug_recommendor.sql. Performing a manipulation results in information disclosure. The attack is possible to be carried out remotely. The exploit has been made public and could be used.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-53557 - SQLBot: Second-Order SQL Injection via Excel Datasource Leading to Remote Command Execution
CVE ID :CVE-2026-53557
Published : Sept. 17, 2026, 9:41 p.m. | 37 minutes ago
Description :SQLBot is an intelligent Text-to-SQL system based on large language models and RAG. Prior to 1.9.0, an authenticated user can supply a crafted sheet["tableName"] value in the Excel datasource configuration submitted through POST /api/v1/datasource/, and SQLBot stores that value without safe identifier handling. When the same datasource is later removed through DELETE /api/v1/datasource/{id}, the stored value is interpolated into datasource cleanup SQL and executed by PostgreSQL. This second-order SQL injection can invoke PostgreSQL COPY TO PROGRAM and execute arbitrary operating-system commands with the privileges of the postgres process inside the SQLBot container. This issue is fixed in version 1.9.0.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-53557
Published : Sept. 17, 2026, 9:41 p.m. | 37 minutes ago
Description :SQLBot is an intelligent Text-to-SQL system based on large language models and RAG. Prior to 1.9.0, an authenticated user can supply a crafted sheet["tableName"] value in the Excel datasource configuration submitted through POST /api/v1/datasource/, and SQLBot stores that value without safe identifier handling. When the same datasource is later removed through DELETE /api/v1/datasource/{id}, the stored value is interpolated into datasource cleanup SQL and executed by PostgreSQL. This second-order SQL injection can invoke PostgreSQL COPY TO PROGRAM and execute arbitrary operating-system commands with the privileges of the postgres process inside the SQLBot container. This issue is fixed in version 1.9.0.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-53534 - JabRef CAYW Sublime Text integration permits operating-system command injection
CVE ID :CVE-2026-53534
Published : Sept. 17, 2026, 9:42 p.m. | 36 minutes ago
Description :JabRef is a desktop application for managing BibTeX and BibLaTeX libraries. Prior to 6.0-alpha.6, when jabsrv or JabRef's built-in HTTP server is enabled, the GET /better-bibtex/cayw endpoint accepts an external command query parameter and CAYWQueryParams.getCommand() passes it through CAYWResource.getCitation() into PushToSublimeText.getCommandLine(). On Unix-like systems, PushToSublimeText combines this untrusted cite-command prefix and citation keys into a string executed through sh -c by ProcessBuilder without shell escaping. A client that can cause a localhost request with application=sublime can inject shell metacharacters and execute operating-system commands as the JabRef user when a valid Sublime Text command path is configured and the victim completes the CAYW selection dialog. The built-in server is disabled by default, so exploitation requires the victim to enable it or run jabsrv. This issue is fixed in version 6.0-alpha.6.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-53534
Published : Sept. 17, 2026, 9:42 p.m. | 36 minutes ago
Description :JabRef is a desktop application for managing BibTeX and BibLaTeX libraries. Prior to 6.0-alpha.6, when jabsrv or JabRef's built-in HTTP server is enabled, the GET /better-bibtex/cayw endpoint accepts an external command query parameter and CAYWQueryParams.getCommand() passes it through CAYWResource.getCitation() into PushToSublimeText.getCommandLine(). On Unix-like systems, PushToSublimeText combines this untrusted cite-command prefix and citation keys into a string executed through sh -c by ProcessBuilder without shell escaping. A client that can cause a localhost request with application=sublime can inject shell metacharacters and execute operating-system commands as the JabRef user when a valid Sublime Text command path is configured and the victim completes the CAYW selection dialog. The built-in server is disabled by default, so exploitation requires the victim to enable it or run jabsrv. This issue is fixed in version 6.0-alpha.6.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-50158 - yutu: Arbitrary File Write via MCP `caption-download` Tool
CVE ID :CVE-2026-50158
Published : Sept. 17, 2026, 9:43 p.m. | 35 minutes ago
Description :yutu is an AI-powered toolkit for managing and growing YouTube channels. Prior to 0.10.9, the caption-download MCP tool accepts a caller-controlled file parameter through cmd/caption/download.go and passes it to Caption.Download() in pkg/caption/caption.go, where os.Create() creates or truncates that path without using the pkg.Root confinement boundary backed by YUTU_ROOT. A principal able to invoke caption-download, including a local HTTP client when the MCP server runs with its default authentication-disabled configuration, can write downloaded caption bytes to any path writable by the yutu process outside YUTU_ROOT. This can overwrite application files, configuration, shell startup files, logs, or data and can cause persistent code execution or denial of service depending on the selected writable target. Live caption retrieval also requires usable service credentials and an accessible caption identifier. This issue is fixed in version 0.10.9.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-50158
Published : Sept. 17, 2026, 9:43 p.m. | 35 minutes ago
Description :yutu is an AI-powered toolkit for managing and growing YouTube channels. Prior to 0.10.9, the caption-download MCP tool accepts a caller-controlled file parameter through cmd/caption/download.go and passes it to Caption.Download() in pkg/caption/caption.go, where os.Create() creates or truncates that path without using the pkg.Root confinement boundary backed by YUTU_ROOT. A principal able to invoke caption-download, including a local HTTP client when the MCP server runs with its default authentication-disabled configuration, can write downloaded caption bytes to any path writable by the yutu process outside YUTU_ROOT. This can overwrite application files, configuration, shell startup files, logs, or data and can cause persistent code execution or denial of service depending on the selected writable target. Live caption retrieval also requires usable service credentials and an accessible caption identifier. This issue is fixed in version 0.10.9.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-54507 - Vvveb oEmbedProxy vulnerable to server-side request forgery
CVE ID :CVE-2026-54507
Published : Sept. 17, 2026, 9:44 p.m. | 34 minutes ago
Description :Vvveb is a powerful and easy to use CMS with page builder to build websites, blogs or ecommerce stores. Prior to 1.0.8.5, the oEmbedProxy() handler in admin/controller/editor/editor.php accepts an attacker-controlled url parameter and passes it to getUrl(), while validateUrl() in system/functions.php checks only the hostname string and does not validate its resolved addresses. An authenticated admin-panel user with editor/* permission can invoke GET /admin/index.php?module=editor/editor&action=oEmbedProxy with a dotted hostname or normalized loopback form that resolves to a private, loopback, link-local, or reserved address, causing the server to issue an HTTP or HTTPS request and return the response body. Storefront users and anonymous visitors cannot invoke the endpoint, but no CSRF token is required because the action uses GET. This can disclose internal service responses or cloud instance metadata and associated credentials. This issue is fixed in version 1.0.8.5.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-54507
Published : Sept. 17, 2026, 9:44 p.m. | 34 minutes ago
Description :Vvveb is a powerful and easy to use CMS with page builder to build websites, blogs or ecommerce stores. Prior to 1.0.8.5, the oEmbedProxy() handler in admin/controller/editor/editor.php accepts an attacker-controlled url parameter and passes it to getUrl(), while validateUrl() in system/functions.php checks only the hostname string and does not validate its resolved addresses. An authenticated admin-panel user with editor/* permission can invoke GET /admin/index.php?module=editor/editor&action=oEmbedProxy with a dotted hostname or normalized loopback form that resolves to a private, loopback, link-local, or reserved address, causing the server to issue an HTTP or HTTPS request and return the response body. Storefront users and anonymous visitors cannot invoke the endpoint, but no CSRF token is required because the action uses GET. This can disclose internal service responses or cloud instance metadata and associated credentials. This issue is fixed in version 1.0.8.5.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-93307 - O-RAN-SC SMO OAM VES Collector memory allocation
CVE ID :CVE-2026-93307
Published : Sept. 17, 2026, 9:45 p.m. | 34 minutes ago
Description :A vulnerability has been found in O-RAN-SC SMO OAM 2025-06-10. Affected is an unknown function of the component VES Collector. Such manipulation of the argument additionalFields.padding leads to uncontrolled memory allocation. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through a bug report but has not responded yet.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-93307
Published : Sept. 17, 2026, 9:45 p.m. | 34 minutes ago
Description :A vulnerability has been found in O-RAN-SC SMO OAM 2025-06-10. Affected is an unknown function of the component VES Collector. Such manipulation of the argument additionalFields.padding leads to uncontrolled memory allocation. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through a bug report but has not responded yet.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-54613 - Vvveb: Path Traversal in Revision Backup Reader/Deleter via Unsanitized theme Parameter
CVE ID :CVE-2026-54613
Published : Sept. 17, 2026, 9:45 p.m. | 33 minutes ago
Description :Vvveb is a powerful and easy to use CMS with page builder to build websites, blogs or ecommerce stores. Prior to 1.0.8.5, getThemeFolder() in admin/controller/editor/revisions.php returns the attacker-controlled theme parameter without sanitization, and backupFolder() concatenates it beneath DIR_THEMES before editor/revisions/load or editor/revisions/delete operates on a named .html file. sanitizeBackupFileName() strips traversal characters only from the separate file parameter and does not protect the theme directory component. An authenticated user with the default Editor role and editor/* permission can submit traversal sequences that redirect file_get_contents() or unlink() to a reachable backup subdirectory outside the web root. A valid admin session and CSRF token are required, the read is limited to .html files in backup directories, and deletion additionally requires filesystem write permission. This can disclose sensitive exported site content or remove backup data. This issue is fixed in version 1.0.8.5.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-54613
Published : Sept. 17, 2026, 9:45 p.m. | 33 minutes ago
Description :Vvveb is a powerful and easy to use CMS with page builder to build websites, blogs or ecommerce stores. Prior to 1.0.8.5, getThemeFolder() in admin/controller/editor/revisions.php returns the attacker-controlled theme parameter without sanitization, and backupFolder() concatenates it beneath DIR_THEMES before editor/revisions/load or editor/revisions/delete operates on a named .html file. sanitizeBackupFileName() strips traversal characters only from the separate file parameter and does not protect the theme directory component. An authenticated user with the default Editor role and editor/* permission can submit traversal sequences that redirect file_get_contents() or unlink() to a reachable backup subdirectory outside the web root. A valid admin session and CSRF token are required, the read is limited to .html files in backup directories, and deletion additionally requires filesystem write permission. This can disclose sensitive exported site content or remove backup data. This issue is fixed in version 1.0.8.5.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-54612 - Vvveb: Authenticated editor path traversal to PHP file write/RCE via data-v-save-global
CVE ID :CVE-2026-54612
Published : Sept. 17, 2026, 9:46 p.m. | 32 minutes ago
Description :Vvveb is a powerful and easy to use CMS with page builder to build websites, blogs or ecommerce stores. From 1.0.0 until 1.0.8.5, saveGlobalElements() in admin/controller/editor/global-trait.php concatenates the attacker-controlled file portion of data-v-save-global to the active theme directory before loadHTMLFile() and file_put_contents() operate on it. An authenticated user with the default Editor role and editor/* permission can submit crafted HTML to module=editor/editor&action=save and traverse to an existing writable PHP file outside the theme directory. If the target is web-accessible, editor-controlled PHP content executes in the web server context; a shipped public/vadmin/index.php entrypoint can be used as an execution trampoline rather than requiring a test-only file. This can permit persistent webshell placement and compromise application confidentiality, integrity, and availability. This issue is fixed in version 1.0.8.5.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-54612
Published : Sept. 17, 2026, 9:46 p.m. | 32 minutes ago
Description :Vvveb is a powerful and easy to use CMS with page builder to build websites, blogs or ecommerce stores. From 1.0.0 until 1.0.8.5, saveGlobalElements() in admin/controller/editor/global-trait.php concatenates the attacker-controlled file portion of data-v-save-global to the active theme directory before loadHTMLFile() and file_put_contents() operate on it. An authenticated user with the default Editor role and editor/* permission can submit crafted HTML to module=editor/editor&action=save and traverse to an existing writable PHP file outside the theme directory. If the target is web-accessible, editor-controlled PHP content executes in the web server context; a shipped public/vadmin/index.php entrypoint can be used as an execution trampoline rather than requiring a test-only file. This can permit persistent webshell placement and compromise application confidentiality, integrity, and availability. This issue is fixed in version 1.0.8.5.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-54506 - Vvveb: Stored XSS via sanitizeHTML() bypass in user profile bio field
CVE ID :CVE-2026-54506
Published : Sept. 17, 2026, 9:47 p.m. | 31 minutes ago
Description :Vvveb is a powerful and easy to use CMS with page builder to build websites, blogs or ecommerce stores. Prior to 1.0.8.5, app/controller/user/profile.php accepts the user[bio] field and passes stored content through sanitizeHTML() in system/functions.php, whose on* event-handler regular expression omits the forward-slash delimiter and whose do-while condition compares the string to itself, so forbidden nested tags are removed only once. An Author-role or higher user can submit solidus-prefixed event-handler markup or nested forbidden tags that survive sanitization. The stored bio is rendered without sufficient output encoding on /author/{username}, in the admin user-management view, and potentially in comment displays, causing attacker-controlled JavaScript to execute when unauthenticated visitors, administrators, or other users view the content. This can expose browser-session data and permit victim-context account actions, defacement, or phishing. This issue is fixed in version 1.0.8.5.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-54506
Published : Sept. 17, 2026, 9:47 p.m. | 31 minutes ago
Description :Vvveb is a powerful and easy to use CMS with page builder to build websites, blogs or ecommerce stores. Prior to 1.0.8.5, app/controller/user/profile.php accepts the user[bio] field and passes stored content through sanitizeHTML() in system/functions.php, whose on* event-handler regular expression omits the forward-slash delimiter and whose do-while condition compares the string to itself, so forbidden nested tags are removed only once. An Author-role or higher user can submit solidus-prefixed event-handler markup or nested forbidden tags that survive sanitization. The stored bio is rendered without sufficient output encoding on /author/{username}, in the admin user-management view, and potentially in comment displays, causing attacker-controlled JavaScript to execute when unauthenticated visitors, administrators, or other users view the content. This can expose browser-session data and permit victim-context account actions, defacement, or phishing. This issue is fixed in version 1.0.8.5.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-54608 - MythicalDash: Unauthenticated payment bypass in Stripe success-redirect endpoint allows arbitrary free credit top-up
CVE ID :CVE-2026-54608
Published : Sept. 17, 2026, 9:48 p.m. | 30 minutes ago
Description :MythicalDash is a Pterodactyl client area. In 3.5.4-aurora and earlier, GET /api/stripe/process in backend/app/Api/System/Gateways/Stripe.php creates a pending row in mythicaldash_stripe_payments before Stripe checkout succeeds and embeds the payment code in the success redirect, while GET /api/stripe/processed accepts that code without constructing a Session, checking ownership, or retrieving the Stripe Checkout Session to require payment_status to be paid and amount_total to match the expected charge. An ordinary authenticated user can request an attacker-selected coins amount, abandon or fail payment, and submit the pending code directly to the unauthenticated processed endpoint. StripeDB::isPending() then permits User::addCreditsAtomic() to grant the unpaid amount and mark the row processed even though Stripe has not confirmed payment. This permits arbitrary free virtual-currency top-ups and direct financial loss through consumption of hosting resources. No fixed version is available as of this review.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-54608
Published : Sept. 17, 2026, 9:48 p.m. | 30 minutes ago
Description :MythicalDash is a Pterodactyl client area. In 3.5.4-aurora and earlier, GET /api/stripe/process in backend/app/Api/System/Gateways/Stripe.php creates a pending row in mythicaldash_stripe_payments before Stripe checkout succeeds and embeds the payment code in the success redirect, while GET /api/stripe/processed accepts that code without constructing a Session, checking ownership, or retrieving the Stripe Checkout Session to require payment_status to be paid and amount_total to match the expected charge. An ordinary authenticated user can request an attacker-selected coins amount, abandon or fail payment, and submit the pending code directly to the unauthenticated processed endpoint. StripeDB::isPending() then permits User::addCreditsAtomic() to grant the unpaid amount and mark the row processed even though Stripe has not confirmed payment. This permits arbitrary free virtual-currency top-ups and direct financial loss through consumption of hosting resources. No fixed version is available as of this review.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-54634 - Hamlib: rigctld `send_raw` Stack Out-of-Bounds Write and Uninitialized Memory Disclosure
CVE ID :CVE-2026-54634
Published : Sept. 17, 2026, 9:52 p.m. | 26 minutes ago
Description :Hamlib is a ham radio control library for radios, rotators, and amplifiers. Prior to 4.7.2, the unauthenticated rigctld send_raw command on TCP port 4532 reaches rigctl_send_raw() in tests/rigctl_parse.c, which writes a NUL byte at buf[buf_len + 1] outside its 200-byte stack buffer, and rig_send_raw() in src/rig.c, which copies reply_len - 1 bytes instead of the actual nbytes received. A remote client can send the CR terminator with a short payload to trigger both flaws in one command under the default no-password configuration. The out-of-bounds write can crash the daemon or corrupt adjacent stack memory, while the oversized copy can return up to 198 bytes of uninitialized stack data to the client. This issue is fixed in version 4.7.2.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-54634
Published : Sept. 17, 2026, 9:52 p.m. | 26 minutes ago
Description :Hamlib is a ham radio control library for radios, rotators, and amplifiers. Prior to 4.7.2, the unauthenticated rigctld send_raw command on TCP port 4532 reaches rigctl_send_raw() in tests/rigctl_parse.c, which writes a NUL byte at buf[buf_len + 1] outside its 200-byte stack buffer, and rig_send_raw() in src/rig.c, which copies reply_len - 1 bytes instead of the actual nbytes received. A remote client can send the CR terminator with a short payload to trigger both flaws in one command under the default no-password configuration. The out-of-bounds write can crash the daemon or corrupt adjacent stack memory, while the oversized copy can return up to 198 bytes of uninitialized stack data to the client. This issue is fixed in version 4.7.2.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...