CVE-2026-55276 - Apache Tomcat: Logged effective web.xml is incomplete
CVE ID :CVE-2026-55276
Published : June 29, 2026, 8:42 p.m. | 37 minutes ago
Description :Always-Incorrect Control Flow Implementation vulnerability in Apache Tomcat meant that special roles and empty authorisation constraints were not included when the effective web.xml was logged. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.22, from 10.1.0-M1 through 10.1.55, from 9.0.0.M1 through 9.0.118, from 8.5.0 through 8.5.100. Other versions that have reached end of support may also be affected. Users are recommended to upgrade to version 11.0.23, 10.1.56 or 9.0.119 which fixes the issue.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-55276
Published : June 29, 2026, 8:42 p.m. | 37 minutes ago
Description :Always-Incorrect Control Flow Implementation vulnerability in Apache Tomcat meant that special roles and empty authorisation constraints were not included when the effective web.xml was logged. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.22, from 10.1.0-M1 through 10.1.55, from 9.0.0.M1 through 9.0.118, from 8.5.0 through 8.5.100. Other versions that have reached end of support may also be affected. Users are recommended to upgrade to version 11.0.23, 10.1.56 or 9.0.119 which fixes the issue.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-55955 - Apache Tomcat: EncryptInterceptor not protected against replay attacks
CVE ID :CVE-2026-55955
Published : June 29, 2026, 8:44 p.m. | 34 minutes ago
Description :Improper Authentication vulnerability in Apache Tomcat allowed a replay attack against the EncryptionInterceptor in the cluster component. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.22, from 10.1.0-M1 through 10.1.55, from 9.0.13 through 9.0.18, from 8.5.38 through 8.5.100, from 7.0.100 through 7.0.109. Users are recommended to upgrade to version 11.0.23, 10.1.56, 9.0.119, which fixes the issue.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-55955
Published : June 29, 2026, 8:44 p.m. | 34 minutes ago
Description :Improper Authentication vulnerability in Apache Tomcat allowed a replay attack against the EncryptionInterceptor in the cluster component. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.22, from 10.1.0-M1 through 10.1.55, from 9.0.13 through 9.0.18, from 8.5.38 through 8.5.100, from 7.0.100 through 7.0.109. Users are recommended to upgrade to version 11.0.23, 10.1.56, 9.0.119, which fixes the issue.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-55956 - Apache Tomcat: Security constraints for default servlet ignored method
CVE ID :CVE-2026-55956
Published : June 29, 2026, 8:46 p.m. | 33 minutes ago
Description :Improper Authorization vulnerability in Apache Tomcat leads to security constraints specified for the default servlet ignoring any method or method omission configured as part of the constraint. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.22, from 10.1.0-M1 through 10.1.55, from 9.0.0.M1 through 9.0.118, from 8.5.0 through 8.5.100, from 7.0.0 through 7.0.109. Other versions that have reached end of support may also be affected. Users are recommended to upgrade to version 11.0.23, 10.1.56 or 9.0.119, which fix the issue.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-55956
Published : June 29, 2026, 8:46 p.m. | 33 minutes ago
Description :Improper Authorization vulnerability in Apache Tomcat leads to security constraints specified for the default servlet ignoring any method or method omission configured as part of the constraint. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.22, from 10.1.0-M1 through 10.1.55, from 9.0.0.M1 through 9.0.118, from 8.5.0 through 8.5.100, from 7.0.0 through 7.0.109. Other versions that have reached end of support may also be affected. Users are recommended to upgrade to version 11.0.23, 10.1.56 or 9.0.119, which fix the issue.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-55957 - Apache Tomcat: Authentication bypass with JNDIRealm and GSSAPI authenticated bind
CVE ID :CVE-2026-55957
Published : June 29, 2026, 8:47 p.m. | 32 minutes ago
Description :Missing Critical Step in Authentication vulnerability in Apache Tomcat when the JNDIRealm was configured to authenticate binds using GSSAPI allowed attackers to authenticate without provided the correct password. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.4, from 10.1.0-M1 through 10.1.36, from 9.0.0.M1 through 9.0.100, from 8.5.0 through 8.5.100, from 7.0.0 through 7.0.109. Users are recommended to upgrade to version 11.0.5, 10.1.37 or 9.0.101, which fixes the issue.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-55957
Published : June 29, 2026, 8:47 p.m. | 32 minutes ago
Description :Missing Critical Step in Authentication vulnerability in Apache Tomcat when the JNDIRealm was configured to authenticate binds using GSSAPI allowed attackers to authenticate without provided the correct password. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.4, from 10.1.0-M1 through 10.1.36, from 9.0.0.M1 through 9.0.100, from 8.5.0 through 8.5.100, from 7.0.0 through 7.0.109. Users are recommended to upgrade to version 11.0.5, 10.1.37 or 9.0.101, which fixes the issue.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-57997 - Strapi users-permissions - JWT Algorithm Confusion via Missing Algorithm Configuration
CVE ID :CVE-2026-57997
Published : June 29, 2026, 9:16 p.m. | 4 hours, 3 minutes ago
Description :Strapi users-permissions plugin fails to restrict JWT algorithms when plugin::users-permissions.jwt.algorithm is not explicitly configured, allowing acceptance of HS384 and HS512 tokens alongside HS256. Attackers possessing the jwtSecret can mint tokens with non-standard HMAC variants to bypass algorithm restrictions and weaken authentication controls.
Severity: 4.8 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-57997
Published : June 29, 2026, 9:16 p.m. | 4 hours, 3 minutes ago
Description :Strapi users-permissions plugin fails to restrict JWT algorithms when plugin::users-permissions.jwt.algorithm is not explicitly configured, allowing acceptance of HS384 and HS512 tokens alongside HS256. Attackers possessing the jwtSecret can mint tokens with non-standard HMAC variants to bypass algorithm restrictions and weaken authentication controls.
Severity: 4.8 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-10647 - Deadlock denial of service in USB CDC-NCM device class on TX enqueue failure
CVE ID :CVE-2026-10647
Published : June 29, 2026, 9:39 p.m. | 3 hours, 40 minutes ago
Description :The USB CDC-NCM device class (subsys/usb/device_next/class/usbd_cdc_ncm.c) ignores the return value of usbd_ep_enqueue() in its ethernet transmit callback cdc_ncm_send(). When the enqueue fails, the function still calls k_sem_take(&data-sync_sem, K_FOREVER), blocking on a completion semaphore that is only ever signaled from the bulk-IN transfer-completion callback. Because nothing was enqueued, that callback never fires and the calling thread — a shared network traffic-class TX thread — deadlocks permanently while holding the interface TX lock, halting transmission until reboot (and leaking the transmit buffer). The enqueue fails under conditions controlled by the attached USB host: usbd_ep_enqueue() returns -EPERM whenever the bus is suspended (a standard, persistent host operation), and the underlying udc_ep_enqueue() returns -EPERM/-ENODEV on disconnect, bus reset, or endpoint disable. The cdc_ncm_send() guard only checks the DATA_IFACE_ENABLED and IFACE_UP flags, not the suspended state, so a packet transmitted while the host holds the bus suspended reaches the failing enqueue and deadlocks the TX path. The realistic trigger is a bus suspend that occurs while the exported network interface is active and has traffic to send — host sleep, USB selective/auto-suspend, or hub power management — after which any device-originated packet deadlocks the path, recoverable only by reboot. The impact is a persistent loss of the virtual network connection between the host's NCM interface and the Zephyr device; because the deadlocked thread is a shared traffic-class TX thread, egress on other network interfaces can stall as well. There is no memory corruption or information disclosure. The defect was introduced with the CDC-NCM driver and shipped in releases through v4.4.0; it is fixed by checking the usbd_ep_enqueue() return value and freeing the buffer before the blocking wait.
Severity: 5.3 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-10647
Published : June 29, 2026, 9:39 p.m. | 3 hours, 40 minutes ago
Description :The USB CDC-NCM device class (subsys/usb/device_next/class/usbd_cdc_ncm.c) ignores the return value of usbd_ep_enqueue() in its ethernet transmit callback cdc_ncm_send(). When the enqueue fails, the function still calls k_sem_take(&data-sync_sem, K_FOREVER), blocking on a completion semaphore that is only ever signaled from the bulk-IN transfer-completion callback. Because nothing was enqueued, that callback never fires and the calling thread — a shared network traffic-class TX thread — deadlocks permanently while holding the interface TX lock, halting transmission until reboot (and leaking the transmit buffer). The enqueue fails under conditions controlled by the attached USB host: usbd_ep_enqueue() returns -EPERM whenever the bus is suspended (a standard, persistent host operation), and the underlying udc_ep_enqueue() returns -EPERM/-ENODEV on disconnect, bus reset, or endpoint disable. The cdc_ncm_send() guard only checks the DATA_IFACE_ENABLED and IFACE_UP flags, not the suspended state, so a packet transmitted while the host holds the bus suspended reaches the failing enqueue and deadlocks the TX path. The realistic trigger is a bus suspend that occurs while the exported network interface is active and has traffic to send — host sleep, USB selective/auto-suspend, or hub power management — after which any device-originated packet deadlocks the path, recoverable only by reboot. The impact is a persistent loss of the virtual network connection between the host's NCM interface and the Zephyr device; because the deadlocked thread is a shared traffic-class TX thread, egress on other network interfaces can stall as well. There is no memory corruption or information disclosure. The defect was introduced with the CDC-NCM driver and shipped in releases through v4.4.0; it is fixed by checking the usbd_ep_enqueue() return value and freeing the buffer before the blocking wait.
Severity: 5.3 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-34592 - Coolify: Cross-Team IDOR via Unscoped Server and Project Lookups Exposes SSH Keys and Infrastructure
CVE ID :CVE-2026-34592
Published : June 29, 2026, 9:47 p.m. | 3 hours, 32 minutes ago
Description :Coolify is an open-source and self-hostable tool for managing servers, applications, and databases. Prior to 4.0.0-beta.471, Coolify server and project lookups are not scoped to the current team, allowing any authenticated user to access servers and projects belonging to other teams by specifying their IDs directly. This vulnerability is fixed in 4.0.0-beta.471.
Severity: 7.7 | HIGH
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-34592
Published : June 29, 2026, 9:47 p.m. | 3 hours, 32 minutes ago
Description :Coolify is an open-source and self-hostable tool for managing servers, applications, and databases. Prior to 4.0.0-beta.471, Coolify server and project lookups are not scoped to the current team, allowing any authenticated user to access servers and projects belonging to other teams by specifying their IDs directly. This vulnerability is fixed in 4.0.0-beta.471.
Severity: 7.7 | HIGH
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-7656 - Broken IPv6 Neighbor Discovery input validation allows spoofed RA/NS/NA acceptance in Zephyr net stack
CVE ID :CVE-2026-7656
Published : June 29, 2026, 10:09 p.m. | 3 hours, 10 minutes ago
Description :The IPv6 Neighbor Discovery handlers in subsys/net/ip/ipv6_nbr.c (handle_ra_input, handle_ns_input, handle_na_input) used an incorrect boolean expression that combined the RFC 4861 validity checks with the ICMPv6 code check using the wrong operator precedence: the form was '((length/hop/source/target checks) && (icmp_hdr-code != 0))'. Because every legitimate ND message carries ICMPv6 code 0, an attacker setting code == 0 (the normal value) caused the entire predicate to evaluate false, so the packet was never dropped and all of the other checks were silently skipped. The bypassed checks include the mandatory Hop Limit == 255 verification (which proves an ND packet originated on-link and was not forwarded) and, for Router Advertisements, the requirement that the source be a link-local address, as well as multicast-target sanity checks. As a result, an adjacent on-link attacker — and, because the Hop-Limit-255 guard is bypassed, potentially a remote/off-link attacker whose packets would otherwise be rejected — can have forged Router Advertisement, Neighbor Solicitation, and Neighbor Advertisement messages accepted. A forged RA lets the attacker reconfigure the victim's default router, on-link prefixes (SLAAC), MTU, reachable/retransmit timers, and (with CONFIG_NET_IPV6_RA_RDNSS) DNS servers, while forged NS/NA enable neighbor-cache poisoning, enabling man-in-the-middle, traffic redirection, and denial of service. The flaw is an input-validation/authentication weakness rather than a memory-safety issue: the underlying packet-parsing primitives (net_pkt_get_data, net_pkt_read, net_pkt_skip) are independently bounds-safe and the validated 'length' is the true buffer length, so skipping the length check causes no out-of-bounds access. The defect has existed since the logic was introduced in 2018 and shipped in all releases through v4.4.0; it is fixed by splitting the condition so any failing check drops the packet.
Severity: 8.1 | HIGH
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-7656
Published : June 29, 2026, 10:09 p.m. | 3 hours, 10 minutes ago
Description :The IPv6 Neighbor Discovery handlers in subsys/net/ip/ipv6_nbr.c (handle_ra_input, handle_ns_input, handle_na_input) used an incorrect boolean expression that combined the RFC 4861 validity checks with the ICMPv6 code check using the wrong operator precedence: the form was '((length/hop/source/target checks) && (icmp_hdr-code != 0))'. Because every legitimate ND message carries ICMPv6 code 0, an attacker setting code == 0 (the normal value) caused the entire predicate to evaluate false, so the packet was never dropped and all of the other checks were silently skipped. The bypassed checks include the mandatory Hop Limit == 255 verification (which proves an ND packet originated on-link and was not forwarded) and, for Router Advertisements, the requirement that the source be a link-local address, as well as multicast-target sanity checks. As a result, an adjacent on-link attacker — and, because the Hop-Limit-255 guard is bypassed, potentially a remote/off-link attacker whose packets would otherwise be rejected — can have forged Router Advertisement, Neighbor Solicitation, and Neighbor Advertisement messages accepted. A forged RA lets the attacker reconfigure the victim's default router, on-link prefixes (SLAAC), MTU, reachable/retransmit timers, and (with CONFIG_NET_IPV6_RA_RDNSS) DNS servers, while forged NS/NA enable neighbor-cache poisoning, enabling man-in-the-middle, traffic redirection, and denial of service. The flaw is an input-validation/authentication weakness rather than a memory-safety issue: the underlying packet-parsing primitives (net_pkt_get_data, net_pkt_read, net_pkt_skip) are independently bounds-safe and the validated 'length' is the true buffer length, so skipping the length check causes no out-of-bounds access. The defect has existed since the logic was introduced in 2018 and shipped in all releases through v4.4.0; it is fixed by splitting the condition so any failing check drops the packet.
Severity: 8.1 | HIGH
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-8023 - Path traversal in Zephyr HTTP server static-filesystem resource handler allows unauthenticated remote arbitrary file read
CVE ID :CVE-2026-8023
Published : June 29, 2026, 10:15 p.m. | 3 hours, 4 minutes ago
Description :Zephyr's HTTP server (subsys/net/lib/http) provides a static-filesystem resource type (HTTP_RESOURCE_TYPE_STATIC_FS, available when CONFIG_FILE_SYSTEM is enabled) that serves files from a configured root directory. Before this fix, both the HTTP/1 and HTTP/2 front-ends placed the raw, attacker-controlled request path into client-url_buffer (assembled in on_url() for HTTP/1 and copied verbatim from the :path pseudo-header for HTTP/2) without resolving ./.. segments. The static-FS handler then built the on-disk filename by directly concatenating the configured root with that raw URL (snprintk(fname, ..., "%s%s", static_fs_detail-fs_path, client-url_buffer) at http_server_http1.c:603 and http_server_http2.c:490) and opened it with fs_open(fname, FS_O_READ). Because the handler is reached via wildcard/leading-dir (fnmatch FNM_LEADING_DIR) or fallback resource matching, a request such as GET /Severity: 7.5 | HIGH
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-8023
Published : June 29, 2026, 10:15 p.m. | 3 hours, 4 minutes ago
Description :Zephyr's HTTP server (subsys/net/lib/http) provides a static-filesystem resource type (HTTP_RESOURCE_TYPE_STATIC_FS, available when CONFIG_FILE_SYSTEM is enabled) that serves files from a configured root directory. Before this fix, both the HTTP/1 and HTTP/2 front-ends placed the raw, attacker-controlled request path into client-url_buffer (assembled in on_url() for HTTP/1 and copied verbatim from the :path pseudo-header for HTTP/2) without resolving ./.. segments. The static-FS handler then built the on-disk filename by directly concatenating the configured root with that raw URL (snprintk(fname, ..., "%s%s", static_fs_detail-fs_path, client-url_buffer) at http_server_http1.c:603 and http_server_http2.c:490) and opened it with fs_open(fname, FS_O_READ). Because the handler is reached via wildcard/leading-dir (fnmatch FNM_LEADING_DIR) or fallback resource matching, a request such as GET /Severity: 7.5 | HIGH
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-10648 - NULL-pointer dereference in MCUmgr serial/console SMP transport on buffer-pool exhaustion
CVE ID :CVE-2026-10648
Published : June 29, 2026, 10:51 p.m. | 2 hours, 28 minutes ago
Description :mcumgr_serial_process_frag() in subsys/mgmt/mcumgr/transport/src/serial_util.c calls net_buf_reset() on the result of smp_packet_alloc() before checking it for NULL. smp_packet_alloc() uses net_buf_alloc(K_NO_WAIT) against the shared MCUmgr packet pool (CONFIG_MCUMGR_TRANSPORT_NETBUF_COUNT, default 4), which returns NULL when the pool is exhausted. In default builds the __ASSERT_NO_MSG in net_buf_reset is a no-op, so net_buf_simple_reset writes through the NULL pointer (buf->len = 0; buf->data = buf->__buf), causing a fault/crash. The fragment data reaches this code from attacker-controlled bytes on the MCUmgr serial/UART/shell-console transports (smp_uart.c, smp_raw_uart.c, smp_shell.c), and a fresh buffer is allocated at the start of essentially every new packet. An attacker on the serial/console link can flood the transport to drive the 4-entry buffer pool to exhaustion and induce the NULL dereference, crashing the device (denial of service). The defect was introduced after the original MCUmgr rework and shipped in Zephyr v4.4.0. The fix moves the NULL check ahead of net_buf_reset.
Severity: 6.2 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-10648
Published : June 29, 2026, 10:51 p.m. | 2 hours, 28 minutes ago
Description :mcumgr_serial_process_frag() in subsys/mgmt/mcumgr/transport/src/serial_util.c calls net_buf_reset() on the result of smp_packet_alloc() before checking it for NULL. smp_packet_alloc() uses net_buf_alloc(K_NO_WAIT) against the shared MCUmgr packet pool (CONFIG_MCUMGR_TRANSPORT_NETBUF_COUNT, default 4), which returns NULL when the pool is exhausted. In default builds the __ASSERT_NO_MSG in net_buf_reset is a no-op, so net_buf_simple_reset writes through the NULL pointer (buf->len = 0; buf->data = buf->__buf), causing a fault/crash. The fragment data reaches this code from attacker-controlled bytes on the MCUmgr serial/UART/shell-console transports (smp_uart.c, smp_raw_uart.c, smp_shell.c), and a fresh buffer is allocated at the start of essentially every new packet. An attacker on the serial/console link can flood the transport to drive the 4-entry buffer pool to exhaustion and induce the NULL dereference, crashing the device (denial of service). The defect was introduced after the original MCUmgr rework and shipped in Zephyr v4.4.0. The fix moves the NULL check ahead of net_buf_reset.
Severity: 6.2 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-12243 - Path Traversal via Percent-Encoding in nltk.data.find() and nltk.data.load()
CVE ID :CVE-2026-12243
Published : June 30, 2026, 12:14 a.m. | 1 hour, 5 minutes ago
Description :NLTK version 3.9.4 is vulnerable to a path traversal attack due to an incomplete fix for GitHub Issue #3504. The `_UNSAFE_NO_PROTOCOL_RE` regex in `nltk/data.py` checks for literal `../` sequences but fails to account for percent-encoded traversal sequences such as `..%2f`. The `url2pathname()` function decodes these sequences after the validation step, allowing an attacker to bypass the protection. This vulnerability enables an attacker to read arbitrary files accessible to the Python process by controlling the resource name parameter passed to `nltk.data.load()` or `nltk.data.find()`. The issue affects applications that rely on NLTK for resource loading, including NLP web applications, Jupyter notebooks, and CLI tools. The default `pathsec.ENFORCE=False` setting exacerbates the impact by not blocking the file read at the `open()` stage.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-12243
Published : June 30, 2026, 12:14 a.m. | 1 hour, 5 minutes ago
Description :NLTK version 3.9.4 is vulnerable to a path traversal attack due to an incomplete fix for GitHub Issue #3504. The `_UNSAFE_NO_PROTOCOL_RE` regex in `nltk/data.py` checks for literal `../` sequences but fails to account for percent-encoded traversal sequences such as `..%2f`. The `url2pathname()` function decodes these sequences after the validation step, allowing an attacker to bypass the protection. This vulnerability enables an attacker to read arbitrary files accessible to the Python process by controlling the resource name parameter passed to `nltk.data.load()` or `nltk.data.find()`. The issue affects applications that rely on NLTK for resource loading, including NLP web applications, Jupyter notebooks, and CLI tools. The default `pathsec.ENFORCE=False` setting exacerbates the impact by not blocking the file read at the `open()` stage.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-58302 - LinuxCNC rtapi_app Privilege Escalation
CVE ID :CVE-2026-58302
Published : June 30, 2026, 1:09 a.m. | 4 hours, 11 minutes ago
Description :rtapi_app in linuxcnc-uspace in LinuxCNC before 2.9.9 allows privilege escalation. It is installed SUID root and loads shared library modules via dlopen() by using a user-supplied module name. Insufficient validation of the module name allows path traversal, enabling an unprivileged local user to load an arbitrary shared library. Because the process retains elevated privileges during module loading, this results in local privilege escalation to root.
Severity: 8.4 | HIGH
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-58302
Published : June 30, 2026, 1:09 a.m. | 4 hours, 11 minutes ago
Description :rtapi_app in linuxcnc-uspace in LinuxCNC before 2.9.9 allows privilege escalation. It is installed SUID root and loads shared library modules via dlopen() by using a user-supplied module name. Insufficient validation of the module name allows path traversal, enabling an unprivileged local user to load an arbitrary shared library. Because the process retains elevated privileges during module loading, this results in local privilege escalation to root.
Severity: 8.4 | HIGH
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-14160 - Samsung Escargot TOCTOU Race Condition
CVE ID :CVE-2026-14160
Published : June 30, 2026, 2:09 a.m. | 3 hours, 12 minutes ago
Description :Time-of-check time-of-use (TOCTOU) race condition vulnerability in Samsung Open Source Escargot allows Leveraging Race Conditions. This issue affects Escargot: bab3a5797557014ce3c2e28419a6310cfba90d0d.
Severity: 5.9 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-14160
Published : June 30, 2026, 2:09 a.m. | 3 hours, 12 minutes ago
Description :Time-of-check time-of-use (TOCTOU) race condition vulnerability in Samsung Open Source Escargot allows Leveraging Race Conditions. This issue affects Escargot: bab3a5797557014ce3c2e28419a6310cfba90d0d.
Severity: 5.9 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-12114 - Team Members <= 8.7 - Authenticated (Administrator+) Stored Cross-Site Scripting via 'custom_css' Parameter
CVE ID :CVE-2026-12114
Published : June 30, 2026, 2:30 a.m. | 2 hours, 50 minutes ago
Description :The Team Members – Multi Language Supported Team Plugin plugin for WordPress is vulnerable to Stored Cross-Site Scripting via admin settings in all versions up to, and including, 8.7 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with administrator-level permissions and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This only affects multi-site installations and installations where unfiltered_html has been disabled.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-12114
Published : June 30, 2026, 2:30 a.m. | 2 hours, 50 minutes ago
Description :The Team Members – Multi Language Supported Team Plugin plugin for WordPress is vulnerable to Stored Cross-Site Scripting via admin settings in all versions up to, and including, 8.7 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with administrator-level permissions and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This only affects multi-site installations and installations where unfiltered_html has been disabled.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-8944 - Plugin for Google Analytics by IO technologies <= 1.1 - Cross-Site Request Forgery via 'ga_id' Parameter
CVE ID :CVE-2026-8944
Published : June 30, 2026, 4:30 a.m. | 4 hours, 55 minutes ago
Description :The Plugin for Google Analytics by IO technologies plugin for WordPress is vulnerable to Cross-Site Request Forgery in versions up to, and including, 1.1. This is due to missing or incorrect nonce validation on the Google Analytics settings page (ga.php). This makes it possible for unauthenticated attackers to update the plugin's stored Google Analytics tracking ID option (io-ga-id) via a forged request granted they can trick a site administrator into performing an action such as clicking on a link.
Severity: 4.3 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-8944
Published : June 30, 2026, 4:30 a.m. | 4 hours, 55 minutes ago
Description :The Plugin for Google Analytics by IO technologies plugin for WordPress is vulnerable to Cross-Site Request Forgery in versions up to, and including, 1.1. This is due to missing or incorrect nonce validation on the Google Analytics settings page (ga.php). This makes it possible for unauthenticated attackers to update the plugin's stored Google Analytics tracking ID option (io-ga-id) via a forged request granted they can trick a site administrator into performing an action such as clicking on a link.
Severity: 4.3 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-12560 - Editorial Rating <= 4.0.5 - Authenticated (Administrator+) Stored Cross-Site Scripting via 'Link URL' Field
CVE ID :CVE-2026-12560
Published : June 30, 2026, 4:30 a.m. | 4 hours, 55 minutes ago
Description :The Editorial Rating – Product Review & Rating System plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'Link URL' Field in all versions up to, and including, 4.0.5 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with administrator-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The WordPress unfiltered_html capability exemption does not apply here because the payload is stored in post meta (_wpas_er_options via update_post_meta) rather than in post_content or post_excerpt, meaning the restriction affects all administrators regardless of their unfiltered_html status.
Severity: 4.4 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-12560
Published : June 30, 2026, 4:30 a.m. | 4 hours, 55 minutes ago
Description :The Editorial Rating – Product Review & Rating System plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'Link URL' Field in all versions up to, and including, 4.0.5 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with administrator-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The WordPress unfiltered_html capability exemption does not apply here because the payload is stored in post meta (_wpas_er_options via update_post_meta) rather than in post_content or post_excerpt, meaning the restriction affects all administrators regardless of their unfiltered_html status.
Severity: 4.4 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-12349 - Premium Addons for KingComposer <= 1.1.1 - Missing Authorization to Unauthenticated Arbitrary Custom Sidebar Creation and Deletion via 'add_custom_sidebar' and 'remove_custom_sidebar' AJAX actions
CVE ID :CVE-2026-12349
Published : June 30, 2026, 4:30 a.m. | 4 hours, 55 minutes ago
Description :The Premium Addons for KingComposer plugin for WordPress is vulnerable to unauthorized modification and loss of data in versions up to, and including, 1.1.1. This is due to missing authorization and capability checks on the add_custom_sidebar() and remove_custom_sidebar() AJAX handlers, both of which are exposed through wp_ajax_nopriv_* hooks and write directly to the octagon_custom_sidebar option via update_option(). This makes it possible for unauthenticated attackers to create arbitrary custom widget areas or delete existing custom sidebars, which can cause widgets assigned to those areas to silently lose their registration and stop rendering.
Severity: 5.3 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-12349
Published : June 30, 2026, 4:30 a.m. | 4 hours, 55 minutes ago
Description :The Premium Addons for KingComposer plugin for WordPress is vulnerable to unauthorized modification and loss of data in versions up to, and including, 1.1.1. This is due to missing authorization and capability checks on the add_custom_sidebar() and remove_custom_sidebar() AJAX handlers, both of which are exposed through wp_ajax_nopriv_* hooks and write directly to the octagon_custom_sidebar option via update_option(). This makes it possible for unauthenticated attackers to create arbitrary custom widget areas or delete existing custom sidebars, which can cause widgets assigned to those areas to silently lose their registration and stop rendering.
Severity: 5.3 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-11367 - PixMagix <= 1.7.2 - Authenticated (Author+) Path Traversal in 'layers[].id' Parameter
CVE ID :CVE-2026-11367
Published : June 30, 2026, 4:30 a.m. | 4 hours, 55 minutes ago
Description :The PixMagix – WordPress Image Editor plugin for WordPress is vulnerable to Directory Traversal in all versions up to, and including, 1.7.2 via the move_image_on_server function. This makes it possible for authenticated attackers, with author-level access and above, to write files with attacker-controlled content to arbitrary locations on the server. The unsanitized 'layers[].id' parameter is concatenated into a filesystem path and passed to PHP's copy() function, allowing traversal sequences (e.g. '../../') to escape the intended upload directory and write attacker-supplied file contents to arbitrary paths accessible by the web server process. The save_template REST endpoint is gated by the create_projects permission (edit_pixmagix + upload_files), which Author-level users hold by default after plugin activation, making this exploitable by any Author on sites running PixMagix.
Severity: 6.5 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-11367
Published : June 30, 2026, 4:30 a.m. | 4 hours, 55 minutes ago
Description :The PixMagix – WordPress Image Editor plugin for WordPress is vulnerable to Directory Traversal in all versions up to, and including, 1.7.2 via the move_image_on_server function. This makes it possible for authenticated attackers, with author-level access and above, to write files with attacker-controlled content to arbitrary locations on the server. The unsanitized 'layers[].id' parameter is concatenated into a filesystem path and passed to PHP's copy() function, allowing traversal sequences (e.g. '../../') to escape the intended upload directory and write attacker-supplied file contents to arbitrary paths accessible by the web server process. The save_template REST endpoint is gated by the create_projects permission (edit_pixmagix + upload_files), which Author-level users hold by default after plugin activation, making this exploitable by any Author on sites running PixMagix.
Severity: 6.5 | MEDIUM
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-12073 - ProfileGrid - User Profiles, Groups and Communities <= 5.9.9.5 - Unauthenticated Privilege Escalation via Email Overwrite
CVE ID :CVE-2026-12073
Published : June 30, 2026, 5:34 a.m. | 3 hours, 52 minutes ago
Description :The ProfileGrid – User Profiles, Groups and Communities plugin for WordPress is vulnerable to privilege escalation via account takeover in all versions up to, and including, 5.9.9.5. This is due to the plugin not validating a `user_login` on registration forms that don't contain this parameter, and not properly handling the error messages. This makes it possible for unauthenticated attackers to change email address of user account with ID=1 (usually an administrator), and leverage that to reset the user's password and gain access to their account.
Severity: 9.8 | CRITICAL
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-12073
Published : June 30, 2026, 5:34 a.m. | 3 hours, 52 minutes ago
Description :The ProfileGrid – User Profiles, Groups and Communities plugin for WordPress is vulnerable to privilege escalation via account takeover in all versions up to, and including, 5.9.9.5. This is due to the plugin not validating a `user_login` on registration forms that don't contain this parameter, and not properly handling the error messages. This makes it possible for unauthenticated attackers to change email address of user account with ID=1 (usually an administrator), and leverage that to reset the user's password and gain access to their account.
Severity: 9.8 | CRITICAL
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-11581 - Kali Forms < 2.4.13 - Contributor+ Stored XSS via Form Field Caption
CVE ID :CVE-2026-11581
Published : June 30, 2026, 6 a.m. | 3 hours, 26 minutes ago
Description :The Kali Forms — Contact Form & Drag-and-Drop Builder WordPress plugin before 2.4.13 does not sanitise a form field's caption before outputting it as a column header on the administrator form-entries screen, allowing users with Contributor-level access or above to store JavaScript that executes in an administrator's session. A missing capability check in the Kali Forms — Contact Form & Drag-and-Drop Builder WordPress plugin before 2.4.13's post-duplication action additionally lets the Contributor publish the malicious form so an administrator renders it.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-11581
Published : June 30, 2026, 6 a.m. | 3 hours, 26 minutes ago
Description :The Kali Forms — Contact Form & Drag-and-Drop Builder WordPress plugin before 2.4.13 does not sanitise a form field's caption before outputting it as a column header on the administrator form-entries screen, allowing users with Contributor-level access or above to store JavaScript that executes in an administrator's session. A missing capability check in the Kali Forms — Contact Form & Drag-and-Drop Builder WordPress plugin before 2.4.13's post-duplication action additionally lets the Contributor publish the malicious form so an administrator renders it.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2026-11589 - WP Support Plus Responsive Ticket System <= 9.1.2 - Unauthenticated Stored XSS via File Upload
CVE ID :CVE-2026-11589
Published : June 30, 2026, 6 a.m. | 3 hours, 26 minutes ago
Description :The WP Support Plus Responsive Ticket System WordPress plugin through 9.1.2 does not properly validate uploaded files, allowing unauthenticated users to upload files containing malicious JavaScript (such as HTML or SVG) to a publicly accessible location, leading to Stored Cross-Site Scripting attacks against site users and administrators.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID :CVE-2026-11589
Published : June 30, 2026, 6 a.m. | 3 hours, 26 minutes ago
Description :The WP Support Plus Responsive Ticket System WordPress plugin through 9.1.2 does not properly validate uploaded files, allowing unauthenticated users to upload files containing malicious JavaScript (such as HTML or SVG) to a publicly accessible location, leading to Stored Cross-Site Scripting attacks against site users and administrators.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...