CVE-2025-39925 - can: j1939: implement NETDEV_UNREGISTER notification handler
CVE ID : CVE-2025-39925
Published : Oct. 1, 2025, 8:07 a.m. | 8 minutes ago
Description : In the Linux kernel, the following vulnerability has been resolved: can: j1939: implement NETDEV_UNREGISTER notification handler syzbot is reporting unregister_netdevice: waiting for vcan0 to become free. Usage count = 2 problem, for j1939 protocol did not have NETDEV_UNREGISTER notification handler for undoing changes made by j1939_sk_bind(). Commit 25fe97cb7620 ("can: j1939: move j1939_priv_put() into sk_destruct callback") expects that a call to j1939_priv_put() can be unconditionally delayed until j1939_sk_sock_destruct() is called. But we need to call j1939_priv_put() against an extra ref held by j1939_sk_bind() call (as a part of undoing changes made by j1939_sk_bind()) as soon as NETDEV_UNREGISTER notification fires (i.e. before j1939_sk_sock_destruct() is called via j1939_sk_release()). Otherwise, the extra ref on "struct j1939_priv" held by j1939_sk_bind() call prevents "struct net_device" from dropping the usage count to 1; making it impossible for unregister_netdevice() to continue. [mkl: remove space in front of label]
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID : CVE-2025-39925
Published : Oct. 1, 2025, 8:07 a.m. | 8 minutes ago
Description : In the Linux kernel, the following vulnerability has been resolved: can: j1939: implement NETDEV_UNREGISTER notification handler syzbot is reporting unregister_netdevice: waiting for vcan0 to become free. Usage count = 2 problem, for j1939 protocol did not have NETDEV_UNREGISTER notification handler for undoing changes made by j1939_sk_bind(). Commit 25fe97cb7620 ("can: j1939: move j1939_priv_put() into sk_destruct callback") expects that a call to j1939_priv_put() can be unconditionally delayed until j1939_sk_sock_destruct() is called. But we need to call j1939_priv_put() against an extra ref held by j1939_sk_bind() call (as a part of undoing changes made by j1939_sk_bind()) as soon as NETDEV_UNREGISTER notification fires (i.e. before j1939_sk_sock_destruct() is called via j1939_sk_release()). Otherwise, the extra ref on "struct j1939_priv" held by j1939_sk_bind() call prevents "struct net_device" from dropping the usage count to 1; making it impossible for unregister_netdevice() to continue. [mkl: remove space in front of label]
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2025-39926 - genetlink: fix genl_bind() invoking bind() after -EPERM
CVE ID : CVE-2025-39926
Published : Oct. 1, 2025, 8:07 a.m. | 8 minutes ago
Description : In the Linux kernel, the following vulnerability has been resolved: genetlink: fix genl_bind() invoking bind() after -EPERM Per family bind/unbind callbacks were introduced to allow families to track multicast group consumer presence, e.g. to start or stop producing events depending on listeners. However, in genl_bind() the bind() callback was invoked even if capability checks failed and ret was set to -EPERM. This means that callbacks could run on behalf of unauthorized callers while the syscall still returned failure to user space. Fix this by only invoking bind() after "if (ret) break;" check i.e. after permission checks have succeeded.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID : CVE-2025-39926
Published : Oct. 1, 2025, 8:07 a.m. | 8 minutes ago
Description : In the Linux kernel, the following vulnerability has been resolved: genetlink: fix genl_bind() invoking bind() after -EPERM Per family bind/unbind callbacks were introduced to allow families to track multicast group consumer presence, e.g. to start or stop producing events depending on listeners. However, in genl_bind() the bind() callback was invoked even if capability checks failed and ret was set to -EPERM. This means that callbacks could run on behalf of unauthorized callers while the syscall still returned failure to user space. Fix this by only invoking bind() after "if (ret) break;" check i.e. after permission checks have succeeded.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2025-39927 - ceph: fix race condition validating r_parent before applying state
CVE ID : CVE-2025-39927
Published : Oct. 1, 2025, 8:07 a.m. | 8 minutes ago
Description : In the Linux kernel, the following vulnerability has been resolved: ceph: fix race condition validating r_parent before applying state Add validation to ensure the cached parent directory inode matches the directory info in MDS replies. This prevents client-side race conditions where concurrent operations (e.g. rename) cause r_parent to become stale between request initiation and reply processing, which could lead to applying state changes to incorrect directory inodes. [ idryomov: folded a kerneldoc fixup and a follow-up fix from Alex to move CEPH_CAP_PIN reference when r_parent is updated: When the parent directory lock is not held, req->r_parent can become stale and is updated to point to the correct inode. However, the associated CEPH_CAP_PIN reference was not being adjusted. The CEPH_CAP_PIN is a reference on an inode that is tracked for accounting purposes. Moving this pin is important to keep the accounting balanced. When the pin was not moved from the old parent to the new one, it created two problems: The reference on the old, stale parent was never released, causing a reference leak. A reference for the new parent was never acquired, creating the risk of a reference underflow later in ceph_mdsc_release_request(). This patch corrects the logic by releasing the pin from the old parent and acquiring it for the new parent when r_parent is switched. This ensures reference accounting stays balanced. ]
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID : CVE-2025-39927
Published : Oct. 1, 2025, 8:07 a.m. | 8 minutes ago
Description : In the Linux kernel, the following vulnerability has been resolved: ceph: fix race condition validating r_parent before applying state Add validation to ensure the cached parent directory inode matches the directory info in MDS replies. This prevents client-side race conditions where concurrent operations (e.g. rename) cause r_parent to become stale between request initiation and reply processing, which could lead to applying state changes to incorrect directory inodes. [ idryomov: folded a kerneldoc fixup and a follow-up fix from Alex to move CEPH_CAP_PIN reference when r_parent is updated: When the parent directory lock is not held, req->r_parent can become stale and is updated to point to the correct inode. However, the associated CEPH_CAP_PIN reference was not being adjusted. The CEPH_CAP_PIN is a reference on an inode that is tracked for accounting purposes. Moving this pin is important to keep the accounting balanced. When the pin was not moved from the old parent to the new one, it created two problems: The reference on the old, stale parent was never released, causing a reference leak. A reference for the new parent was never acquired, creating the risk of a reference underflow later in ceph_mdsc_release_request(). This patch corrects the logic by releasing the pin from the old parent and acquiring it for the new parent when r_parent is switched. This ensures reference accounting stays balanced. ]
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2025-39928 - i2c: rtl9300: ensure data length is within supported range
CVE ID : CVE-2025-39928
Published : Oct. 1, 2025, 8:07 a.m. | 8 minutes ago
Description : In the Linux kernel, the following vulnerability has been resolved: i2c: rtl9300: ensure data length is within supported range Add an explicit check for the xfer length to 'rtl9300_i2c_config_xfer' to ensure the data length isn't within the supported range. In particular a data length of 0 is not supported by the hardware and causes unintended or destructive behaviour. This limitation becomes obvious when looking at the register documentation [1]. 4 bits are reserved for DATA_WIDTH and the value of these 4 bits is used as N + 1, allowing a data length range of 1 <= len <= 16. Affected by this is the SMBus Quick Operation which works with a data length of 0. Passing 0 as the length causes an underflow of the value due to: (len - 1) & 0xf and effectively specifying a transfer length of 16 via the registers. This causes a 16-byte write operation instead of a Quick Write. For example, on SFP modules without write-protected EEPROM this soft-bricks them by overwriting some initial bytes. For completeness, also add a quirk for the zero length. [1] https://svanheule.net/realtek/longan/register/i2c_mst1_ctrl2
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID : CVE-2025-39928
Published : Oct. 1, 2025, 8:07 a.m. | 8 minutes ago
Description : In the Linux kernel, the following vulnerability has been resolved: i2c: rtl9300: ensure data length is within supported range Add an explicit check for the xfer length to 'rtl9300_i2c_config_xfer' to ensure the data length isn't within the supported range. In particular a data length of 0 is not supported by the hardware and causes unintended or destructive behaviour. This limitation becomes obvious when looking at the register documentation [1]. 4 bits are reserved for DATA_WIDTH and the value of these 4 bits is used as N + 1, allowing a data length range of 1 <= len <= 16. Affected by this is the SMBus Quick Operation which works with a data length of 0. Passing 0 as the length causes an underflow of the value due to: (len - 1) & 0xf and effectively specifying a transfer length of 16 via the registers. This causes a 16-byte write operation instead of a Quick Write. For example, on SFP modules without write-protected EEPROM this soft-bricks them by overwriting some initial bytes. For completeness, also add a quirk for the zero length. [1] https://svanheule.net/realtek/longan/register/i2c_mst1_ctrl2
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2025-61622 - Apache Fory, Apache Fory: Python RCE via unguarded pickle fallback serializer in pyfory
CVE ID : CVE-2025-61622
Published : Oct. 1, 2025, 10:15 a.m. | 1 hour, 28 minutes ago
Description : Deserialization of untrusted data in python in pyfory versions 0.12.0 through 0.12.2, or the legacy pyfury versions from 0.1.0 through 0.10.3: allows arbitrary code execution. An application is vulnerable if it reads pyfory serialized data from untrusted sources. An attacker can craft a data stream that selects pickle-fallback serializer during deserialization, leading to the execution of `pickle.loads`, which is vulnerable to remote code execution. Users are recommended to upgrade to pyfory version 0.12.3 or later, which has removed pickle fallback serializer and thus fixes this issue.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID : CVE-2025-61622
Published : Oct. 1, 2025, 10:15 a.m. | 1 hour, 28 minutes ago
Description : Deserialization of untrusted data in python in pyfory versions 0.12.0 through 0.12.2, or the legacy pyfury versions from 0.1.0 through 0.10.3: allows arbitrary code execution. An application is vulnerable if it reads pyfory serialized data from untrusted sources. An attacker can craft a data stream that selects pickle-fallback serializer during deserialization, leading to the execution of `pickle.loads`, which is vulnerable to remote code execution. Users are recommended to upgrade to pyfory version 0.12.3 or later, which has removed pickle fallback serializer and thus fixes this issue.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2025-10847 - DX UIM Probe Improper ACL Handling RCE
CVE ID : CVE-2025-10847
Published : Oct. 1, 2025, 11:15 a.m. | 28 minutes ago
Description : DX Unified Infrastructure Management (Nimsoft/UIM) and below contains an improper ACL handling vulnerability in the robot (controller) component. A remote attacker can execute commands, read from, or write to the target system.
Severity: 8.4 | HIGH
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID : CVE-2025-10847
Published : Oct. 1, 2025, 11:15 a.m. | 28 minutes ago
Description : DX Unified Infrastructure Management (Nimsoft/UIM) and below contains an improper ACL handling vulnerability in the robot (controller) component. A remote attacker can execute commands, read from, or write to the target system.
Severity: 8.4 | HIGH
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2023-53511 - io_uring: fix fget leak when fs don't support nowait buffered read
CVE ID : CVE-2023-53511
Published : Oct. 1, 2025, 12:15 p.m. | 2 hours ago
Description : In the Linux kernel, the following vulnerability has been resolved: io_uring: fix fget leak when fs don't support nowait buffered read Heming reported a BUG when using io_uring doing link-cp on ocfs2. [1] Do the following steps can reproduce this BUG: mount -t ocfs2 /dev/vdc /mnt/ocfs2 cp testfile /mnt/ocfs2/ ./link-cp /mnt/ocfs2/testfile /mnt/ocfs2/testfile.1 umount /mnt/ocfs2 Then umount will fail, and it outputs: umount: /mnt/ocfs2: target is busy. While tracing umount, it blames mnt_get_count() not return as expected. Do a deep investigation for fget()/fput() on related code flow, I've finally found that fget() leaks since ocfs2 doesn't support nowait buffered read. io_issue_sqe |-io_assign_file // do fget() first |-io_read |-io_iter_do_read |-ocfs2_file_read_iter // return -EOPNOTSUPP |-kiocb_done |-io_rw_done |-__io_complete_rw_common // set REQ_F_REISSUE |-io_resubmit_prep |-io_req_prep_async // override req->file, leak happens This was introduced by commit a196c78b5443 in v5.18. Fix it by don't re-assign req->file if it has already been assigned. [1] https://lore.kernel.org/ocfs2-devel/ab580a75-91c8-d68a-3455-40361be1bfa8@linux.alibaba.com/T/#t
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID : CVE-2023-53511
Published : Oct. 1, 2025, 12:15 p.m. | 2 hours ago
Description : In the Linux kernel, the following vulnerability has been resolved: io_uring: fix fget leak when fs don't support nowait buffered read Heming reported a BUG when using io_uring doing link-cp on ocfs2. [1] Do the following steps can reproduce this BUG: mount -t ocfs2 /dev/vdc /mnt/ocfs2 cp testfile /mnt/ocfs2/ ./link-cp /mnt/ocfs2/testfile /mnt/ocfs2/testfile.1 umount /mnt/ocfs2 Then umount will fail, and it outputs: umount: /mnt/ocfs2: target is busy. While tracing umount, it blames mnt_get_count() not return as expected. Do a deep investigation for fget()/fput() on related code flow, I've finally found that fget() leaks since ocfs2 doesn't support nowait buffered read. io_issue_sqe |-io_assign_file // do fget() first |-io_read |-io_iter_do_read |-ocfs2_file_read_iter // return -EOPNOTSUPP |-kiocb_done |-io_rw_done |-__io_complete_rw_common // set REQ_F_REISSUE |-io_resubmit_prep |-io_req_prep_async // override req->file, leak happens This was introduced by commit a196c78b5443 in v5.18. Fix it by don't re-assign req->file if it has already been assigned. [1] https://lore.kernel.org/ocfs2-devel/ab580a75-91c8-d68a-3455-40361be1bfa8@linux.alibaba.com/T/#t
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2023-53512 - scsi: mpt3sas: Fix a memory leak
CVE ID : CVE-2023-53512
Published : Oct. 1, 2025, 12:15 p.m. | 2 hours ago
Description : In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix a memory leak Add a forgotten kfree().
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID : CVE-2023-53512
Published : Oct. 1, 2025, 12:15 p.m. | 2 hours ago
Description : In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix a memory leak Add a forgotten kfree().
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2023-53513 - nbd: fix incomplete validation of ioctl arg
CVE ID : CVE-2023-53513
Published : Oct. 1, 2025, 12:15 p.m. | 2 hours ago
Description : In the Linux kernel, the following vulnerability has been resolved: nbd: fix incomplete validation of ioctl arg We tested and found an alarm caused by nbd_ioctl arg without verification. The UBSAN warning calltrace like below: UBSAN: Undefined behaviour in fs/buffer.c:1709:35 signed integer overflow: -9223372036854775808 - 1 cannot be represented in type 'long long int' CPU: 3 PID: 2523 Comm: syz-executor.0 Not tainted 4.19.90 #1 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x3f0 arch/arm64/kernel/time.c:78 show_stack+0x28/0x38 arch/arm64/kernel/traps.c:158 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x170/0x1dc lib/dump_stack.c:118 ubsan_epilogue+0x18/0xb4 lib/ubsan.c:161 handle_overflow+0x188/0x1dc lib/ubsan.c:192 __ubsan_handle_sub_overflow+0x34/0x44 lib/ubsan.c:206 __block_write_full_page+0x94c/0xa20 fs/buffer.c:1709 block_write_full_page+0x1f0/0x280 fs/buffer.c:2934 blkdev_writepage+0x34/0x40 fs/block_dev.c:607 __writepage+0x68/0xe8 mm/page-writeback.c:2305 write_cache_pages+0x44c/0xc70 mm/page-writeback.c:2240 generic_writepages+0xdc/0x148 mm/page-writeback.c:2329 blkdev_writepages+0x2c/0x38 fs/block_dev.c:2114 do_writepages+0xd4/0x250 mm/page-writeback.c:2344 The reason for triggering this warning is __block_write_full_page() -> i_size_read(inode) - 1 overflow. inode->i_size is assigned in __nbd_ioctl() -> nbd_set_size() -> bytesize. We think it is necessary to limit the size of arg to prevent errors. Moreover, __nbd_ioctl() -> nbd_add_socket(), arg will be cast to int. Assuming the value of arg is 0x80000000000000001) (on a 64-bit machine), it will become 1 after the coercion, which will return unexpected results. Fix it by adding checks to prevent passing in too large numbers.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID : CVE-2023-53513
Published : Oct. 1, 2025, 12:15 p.m. | 2 hours ago
Description : In the Linux kernel, the following vulnerability has been resolved: nbd: fix incomplete validation of ioctl arg We tested and found an alarm caused by nbd_ioctl arg without verification. The UBSAN warning calltrace like below: UBSAN: Undefined behaviour in fs/buffer.c:1709:35 signed integer overflow: -9223372036854775808 - 1 cannot be represented in type 'long long int' CPU: 3 PID: 2523 Comm: syz-executor.0 Not tainted 4.19.90 #1 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x3f0 arch/arm64/kernel/time.c:78 show_stack+0x28/0x38 arch/arm64/kernel/traps.c:158 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x170/0x1dc lib/dump_stack.c:118 ubsan_epilogue+0x18/0xb4 lib/ubsan.c:161 handle_overflow+0x188/0x1dc lib/ubsan.c:192 __ubsan_handle_sub_overflow+0x34/0x44 lib/ubsan.c:206 __block_write_full_page+0x94c/0xa20 fs/buffer.c:1709 block_write_full_page+0x1f0/0x280 fs/buffer.c:2934 blkdev_writepage+0x34/0x40 fs/block_dev.c:607 __writepage+0x68/0xe8 mm/page-writeback.c:2305 write_cache_pages+0x44c/0xc70 mm/page-writeback.c:2240 generic_writepages+0xdc/0x148 mm/page-writeback.c:2329 blkdev_writepages+0x2c/0x38 fs/block_dev.c:2114 do_writepages+0xd4/0x250 mm/page-writeback.c:2344 The reason for triggering this warning is __block_write_full_page() -> i_size_read(inode) - 1 overflow. inode->i_size is assigned in __nbd_ioctl() -> nbd_set_size() -> bytesize. We think it is necessary to limit the size of arg to prevent errors. Moreover, __nbd_ioctl() -> nbd_add_socket(), arg will be cast to int. Assuming the value of arg is 0x80000000000000001) (on a 64-bit machine), it will become 1 after the coercion, which will return unexpected results. Fix it by adding checks to prevent passing in too large numbers.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2023-53514 - gpu: host1x: Fix memory leak of device names
CVE ID : CVE-2023-53514
Published : Oct. 1, 2025, 12:15 p.m. | 2 hours ago
Description : In the Linux kernel, the following vulnerability has been resolved: gpu: host1x: Fix memory leak of device names The device names allocated by dev_set_name() need be freed before module unloading, but they can not be freed because the kobject's refcount which was set in device_initialize() has not be decreased to 0. As comment of device_add() says, if it fails, use only put_device() drop the refcount, then the name will be freed in kobejct_cleanup(). device_del() and put_device() can be replaced with device_unregister(), so call it to unregister the added successfully devices, and just call put_device() to the not added device. Add a release() function to device to avoid null release() function WARNING in device_release(), it's empty, because the context devices are freed together in host1x_memory_context_list_free().
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID : CVE-2023-53514
Published : Oct. 1, 2025, 12:15 p.m. | 2 hours ago
Description : In the Linux kernel, the following vulnerability has been resolved: gpu: host1x: Fix memory leak of device names The device names allocated by dev_set_name() need be freed before module unloading, but they can not be freed because the kobject's refcount which was set in device_initialize() has not be decreased to 0. As comment of device_add() says, if it fails, use only put_device() drop the refcount, then the name will be freed in kobejct_cleanup(). device_del() and put_device() can be replaced with device_unregister(), so call it to unregister the added successfully devices, and just call put_device() to the not added device. Add a release() function to device to avoid null release() function WARNING in device_release(), it's empty, because the context devices are freed together in host1x_memory_context_list_free().
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2023-53515 - virtio-mmio: don't break lifecycle of vm_dev
CVE ID : CVE-2023-53515
Published : Oct. 1, 2025, 12:15 p.m. | 2 hours ago
Description : In the Linux kernel, the following vulnerability has been resolved: virtio-mmio: don't break lifecycle of vm_dev vm_dev has a separate lifecycle because it has a 'struct device' embedded. Thus, having a release callback for it is correct. Allocating the vm_dev struct with devres totally breaks this protection, though. Instead of waiting for the vm_dev release callback, the memory is freed when the platform_device is removed. Resulting in a use-after-free when finally the callback is to be called. To easily see the problem, compile the kernel with CONFIG_DEBUG_KOBJECT_RELEASE and unbind with sysfs. The fix is easy, don't use devres in this case. Found during my research about object lifetime problems.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID : CVE-2023-53515
Published : Oct. 1, 2025, 12:15 p.m. | 2 hours ago
Description : In the Linux kernel, the following vulnerability has been resolved: virtio-mmio: don't break lifecycle of vm_dev vm_dev has a separate lifecycle because it has a 'struct device' embedded. Thus, having a release callback for it is correct. Allocating the vm_dev struct with devres totally breaks this protection, though. Instead of waiting for the vm_dev release callback, the memory is freed when the platform_device is removed. Resulting in a use-after-free when finally the callback is to be called. To easily see the problem, compile the kernel with CONFIG_DEBUG_KOBJECT_RELEASE and unbind with sysfs. The fix is easy, don't use devres in this case. Found during my research about object lifetime problems.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2023-53516 - macvlan: add forgotten nla_policy for IFLA_MACVLAN_BC_CUTOFF
CVE ID : CVE-2023-53516
Published : Oct. 1, 2025, 12:15 p.m. | 2 hours ago
Description : In the Linux kernel, the following vulnerability has been resolved: macvlan: add forgotten nla_policy for IFLA_MACVLAN_BC_CUTOFF The previous commit 954d1fa1ac93 ("macvlan: Add netlink attribute for broadcast cutoff") added one additional attribute named IFLA_MACVLAN_BC_CUTOFF to allow broadcast cutfoff. However, it forgot to describe the nla_policy at macvlan_policy (drivers/net/macvlan.c). Hence, this suppose NLA_S32 (4 bytes) integer can be faked as empty (0 bytes) by a malicious user, which could leads to OOB in heap just like CVE-2023-3773. To fix it, this commit just completes the nla_policy description for IFLA_MACVLAN_BC_CUTOFF. This enforces the length check and avoids the potential OOB read.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID : CVE-2023-53516
Published : Oct. 1, 2025, 12:15 p.m. | 2 hours ago
Description : In the Linux kernel, the following vulnerability has been resolved: macvlan: add forgotten nla_policy for IFLA_MACVLAN_BC_CUTOFF The previous commit 954d1fa1ac93 ("macvlan: Add netlink attribute for broadcast cutoff") added one additional attribute named IFLA_MACVLAN_BC_CUTOFF to allow broadcast cutfoff. However, it forgot to describe the nla_policy at macvlan_policy (drivers/net/macvlan.c). Hence, this suppose NLA_S32 (4 bytes) integer can be faked as empty (0 bytes) by a malicious user, which could leads to OOB in heap just like CVE-2023-3773. To fix it, this commit just completes the nla_policy description for IFLA_MACVLAN_BC_CUTOFF. This enforces the length check and avoids the potential OOB read.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2023-53517 - tipc: do not update mtu if msg_max is too small in mtu negotiation
CVE ID : CVE-2023-53517
Published : Oct. 1, 2025, 12:15 p.m. | 2 hours ago
Description : In the Linux kernel, the following vulnerability has been resolved: tipc: do not update mtu if msg_max is too small in mtu negotiation When doing link mtu negotiation, a malicious peer may send Activate msg with a very small mtu, e.g. 4 in Shuang's testing, without checking for the minimum mtu, l->mtu will be set to 4 in tipc_link_proto_rcv(), then n->links[bearer_id].mtu is set to 4294967228, which is a overflow of '4 - INT_H_SIZE - EMSG_OVERHEAD' in tipc_link_mss(). With tipc_link.mtu = 4, tipc_link_xmit() kept printing the warning: tipc: Too large msg, purging xmit list 1 5 0 40 4! tipc: Too large msg, purging xmit list 1 15 0 60 4! And with tipc_link_entry.mtu 4294967228, a huge skb was allocated in named_distribute(), and when purging it in tipc_link_xmit(), a crash was even caused: general protection fault, probably for non-canonical address 0x2100001011000dd: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Not tainted 6.3.0.neta #19 RIP: 0010:kfree_skb_list_reason+0x7e/0x1f0 Call Trace: skb_release_data+0xf9/0x1d0 kfree_skb_reason+0x40/0x100 tipc_link_xmit+0x57a/0x740 [tipc] tipc_node_xmit+0x16c/0x5c0 [tipc] tipc_named_node_up+0x27f/0x2c0 [tipc] tipc_node_write_unlock+0x149/0x170 [tipc] tipc_rcv+0x608/0x740 [tipc] tipc_udp_recv+0xdc/0x1f0 [tipc] udp_queue_rcv_one_skb+0x33e/0x620 udp_unicast_rcv_skb.isra.72+0x75/0x90 __udp4_lib_rcv+0x56d/0xc20 ip_protocol_deliver_rcu+0x100/0x2d0 This patch fixes it by checking the new mtu against tipc_bearer_min_mtu(), and not updating mtu if it is too small.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID : CVE-2023-53517
Published : Oct. 1, 2025, 12:15 p.m. | 2 hours ago
Description : In the Linux kernel, the following vulnerability has been resolved: tipc: do not update mtu if msg_max is too small in mtu negotiation When doing link mtu negotiation, a malicious peer may send Activate msg with a very small mtu, e.g. 4 in Shuang's testing, without checking for the minimum mtu, l->mtu will be set to 4 in tipc_link_proto_rcv(), then n->links[bearer_id].mtu is set to 4294967228, which is a overflow of '4 - INT_H_SIZE - EMSG_OVERHEAD' in tipc_link_mss(). With tipc_link.mtu = 4, tipc_link_xmit() kept printing the warning: tipc: Too large msg, purging xmit list 1 5 0 40 4! tipc: Too large msg, purging xmit list 1 15 0 60 4! And with tipc_link_entry.mtu 4294967228, a huge skb was allocated in named_distribute(), and when purging it in tipc_link_xmit(), a crash was even caused: general protection fault, probably for non-canonical address 0x2100001011000dd: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Not tainted 6.3.0.neta #19 RIP: 0010:kfree_skb_list_reason+0x7e/0x1f0 Call Trace: skb_release_data+0xf9/0x1d0 kfree_skb_reason+0x40/0x100 tipc_link_xmit+0x57a/0x740 [tipc] tipc_node_xmit+0x16c/0x5c0 [tipc] tipc_named_node_up+0x27f/0x2c0 [tipc] tipc_node_write_unlock+0x149/0x170 [tipc] tipc_rcv+0x608/0x740 [tipc] tipc_udp_recv+0xdc/0x1f0 [tipc] udp_queue_rcv_one_skb+0x33e/0x620 udp_unicast_rcv_skb.isra.72+0x75/0x90 __udp4_lib_rcv+0x56d/0xc20 ip_protocol_deliver_rcu+0x100/0x2d0 This patch fixes it by checking the new mtu against tipc_bearer_min_mtu(), and not updating mtu if it is too small.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2023-53518 - PM / devfreq: Fix leak in devfreq_dev_release()
CVE ID : CVE-2023-53518
Published : Oct. 1, 2025, 12:15 p.m. | 2 hours ago
Description : In the Linux kernel, the following vulnerability has been resolved: PM / devfreq: Fix leak in devfreq_dev_release() srcu_init_notifier_head() allocates resources that need to be released with a srcu_cleanup_notifier_head() call. Reported by kmemleak.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID : CVE-2023-53518
Published : Oct. 1, 2025, 12:15 p.m. | 2 hours ago
Description : In the Linux kernel, the following vulnerability has been resolved: PM / devfreq: Fix leak in devfreq_dev_release() srcu_init_notifier_head() allocates resources that need to be released with a srcu_cleanup_notifier_head() call. Reported by kmemleak.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2023-53519 - media: v4l2-mem2mem: add lock to protect parameter num_rdy
CVE ID : CVE-2023-53519
Published : Oct. 1, 2025, 12:15 p.m. | 2 hours ago
Description : In the Linux kernel, the following vulnerability has been resolved: media: v4l2-mem2mem: add lock to protect parameter num_rdy Getting below error when using KCSAN to check the driver. Adding lock to protect parameter num_rdy when getting the value with function: v4l2_m2m_num_src_bufs_ready/v4l2_m2m_num_dst_bufs_ready. kworker/u16:3: [name:report&]BUG: KCSAN: data-race in v4l2_m2m_buf_queue kworker/u16:3: [name:report&] kworker/u16:3: [name:report&]read-write to 0xffffff8105f35b94 of 1 bytes by task 20865 on cpu 7: kworker/u16:3: v4l2_m2m_buf_queue+0xd8/0x10c
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID : CVE-2023-53519
Published : Oct. 1, 2025, 12:15 p.m. | 2 hours ago
Description : In the Linux kernel, the following vulnerability has been resolved: media: v4l2-mem2mem: add lock to protect parameter num_rdy Getting below error when using KCSAN to check the driver. Adding lock to protect parameter num_rdy when getting the value with function: v4l2_m2m_num_src_bufs_ready/v4l2_m2m_num_dst_bufs_ready. kworker/u16:3: [name:report&]BUG: KCSAN: data-race in v4l2_m2m_buf_queue kworker/u16:3: [name:report&] kworker/u16:3: [name:report&]read-write to 0xffffff8105f35b94 of 1 bytes by task 20865 on cpu 7: kworker/u16:3: v4l2_m2m_buf_queue+0xd8/0x10c
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2023-53520 - Bluetooth: Fix hci_suspend_sync crash
CVE ID : CVE-2023-53520
Published : Oct. 1, 2025, 12:15 p.m. | 2 hours ago
Description : In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix hci_suspend_sync crash If hci_unregister_dev() frees the hci_dev object but hci_suspend_notifier may still be accessing it, it can cause the program to crash. Here's the call trace: <4>[102152.653246] Call Trace: <4>[102152.653254] hci_suspend_sync+0x109/0x301 [bluetooth] <4>[102152.653259] hci_suspend_dev+0x78/0xcd [bluetooth] <4>[102152.653263] hci_suspend_notifier+0x42/0x7a [bluetooth] <4>[102152.653268] notifier_call_chain+0x43/0x6b <4>[102152.653271] __blocking_notifier_call_chain+0x48/0x69 <4>[102152.653273] __pm_notifier_call_chain+0x22/0x39 <4>[102152.653276] pm_suspend+0x287/0x57c <4>[102152.653278] state_store+0xae/0xe5 <4>[102152.653281] kernfs_fop_write+0x109/0x173 <4>[102152.653284] __vfs_write+0x16f/0x1a2 <4>[102152.653287] ? selinux_file_permission+0xca/0x16f <4>[102152.653289] ? security_file_permission+0x36/0x109 <4>[102152.653291] vfs_write+0x114/0x21d <4>[102152.653293] __x64_sys_write+0x7b/0xdb <4>[102152.653296] do_syscall_64+0x59/0x194 <4>[102152.653299] entry_SYSCALL_64_after_hwframe+0x5c/0xc1 This patch holds the reference count of the hci_dev object while processing it in hci_suspend_notifier to avoid potential crash caused by the race condition.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID : CVE-2023-53520
Published : Oct. 1, 2025, 12:15 p.m. | 2 hours ago
Description : In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix hci_suspend_sync crash If hci_unregister_dev() frees the hci_dev object but hci_suspend_notifier may still be accessing it, it can cause the program to crash. Here's the call trace: <4>[102152.653246] Call Trace: <4>[102152.653254] hci_suspend_sync+0x109/0x301 [bluetooth] <4>[102152.653259] hci_suspend_dev+0x78/0xcd [bluetooth] <4>[102152.653263] hci_suspend_notifier+0x42/0x7a [bluetooth] <4>[102152.653268] notifier_call_chain+0x43/0x6b <4>[102152.653271] __blocking_notifier_call_chain+0x48/0x69 <4>[102152.653273] __pm_notifier_call_chain+0x22/0x39 <4>[102152.653276] pm_suspend+0x287/0x57c <4>[102152.653278] state_store+0xae/0xe5 <4>[102152.653281] kernfs_fop_write+0x109/0x173 <4>[102152.653284] __vfs_write+0x16f/0x1a2 <4>[102152.653287] ? selinux_file_permission+0xca/0x16f <4>[102152.653289] ? security_file_permission+0x36/0x109 <4>[102152.653291] vfs_write+0x114/0x21d <4>[102152.653293] __x64_sys_write+0x7b/0xdb <4>[102152.653296] do_syscall_64+0x59/0x194 <4>[102152.653299] entry_SYSCALL_64_after_hwframe+0x5c/0xc1 This patch holds the reference count of the hci_dev object while processing it in hci_suspend_notifier to avoid potential crash caused by the race condition.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2023-53521 - scsi: ses: Fix slab-out-of-bounds in ses_intf_remove()
CVE ID : CVE-2023-53521
Published : Oct. 1, 2025, 12:15 p.m. | 2 hours ago
Description : In the Linux kernel, the following vulnerability has been resolved: scsi: ses: Fix slab-out-of-bounds in ses_intf_remove() A fix for: BUG: KASAN: slab-out-of-bounds in ses_intf_remove+0x23f/0x270 [ses] Read of size 8 at addr ffff88a10d32e5d8 by task rmmod/12013 When edev->components is zero, accessing edev->component[0] members is wrong.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID : CVE-2023-53521
Published : Oct. 1, 2025, 12:15 p.m. | 2 hours ago
Description : In the Linux kernel, the following vulnerability has been resolved: scsi: ses: Fix slab-out-of-bounds in ses_intf_remove() A fix for: BUG: KASAN: slab-out-of-bounds in ses_intf_remove+0x23f/0x270 [ses] Read of size 8 at addr ffff88a10d32e5d8 by task rmmod/12013 When edev->components is zero, accessing edev->component[0] members is wrong.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2023-53522 - cgroup,freezer: hold cpu_hotplug_lock before freezer_mutex
CVE ID : CVE-2023-53522
Published : Oct. 1, 2025, 12:15 p.m. | 2 hours ago
Description : In the Linux kernel, the following vulnerability has been resolved: cgroup,freezer: hold cpu_hotplug_lock before freezer_mutex syzbot is reporting circular locking dependency between cpu_hotplug_lock and freezer_mutex, for commit f5d39b020809 ("freezer,sched: Rewrite core freezer logic") replaced atomic_inc() in freezer_apply_state() with static_branch_inc() which holds cpu_hotplug_lock. cpu_hotplug_lock => cgroup_threadgroup_rwsem => freezer_mutex cgroup_file_write() { cgroup_procs_write() { __cgroup_procs_write() { cgroup_procs_write_start() { cgroup_attach_lock() { cpus_read_lock() { percpu_down_read(&cpu_hotplug_lock); } percpu_down_write(&cgroup_threadgroup_rwsem); } } cgroup_attach_task() { cgroup_migrate() { cgroup_migrate_execute() { freezer_attach() { mutex_lock(&freezer_mutex); (...snipped...) } } } } (...snipped...) } } } freezer_mutex => cpu_hotplug_lock cgroup_file_write() { freezer_write() { freezer_change_state() { mutex_lock(&freezer_mutex); freezer_apply_state() { static_branch_inc(&freezer_active) { static_key_slow_inc() { cpus_read_lock(); static_key_slow_inc_cpuslocked(); cpus_read_unlock(); } } } mutex_unlock(&freezer_mutex); } } } Swap locking order by moving cpus_read_lock() in freezer_apply_state() to before mutex_lock(&freezer_mutex) in freezer_change_state().
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID : CVE-2023-53522
Published : Oct. 1, 2025, 12:15 p.m. | 2 hours ago
Description : In the Linux kernel, the following vulnerability has been resolved: cgroup,freezer: hold cpu_hotplug_lock before freezer_mutex syzbot is reporting circular locking dependency between cpu_hotplug_lock and freezer_mutex, for commit f5d39b020809 ("freezer,sched: Rewrite core freezer logic") replaced atomic_inc() in freezer_apply_state() with static_branch_inc() which holds cpu_hotplug_lock. cpu_hotplug_lock => cgroup_threadgroup_rwsem => freezer_mutex cgroup_file_write() { cgroup_procs_write() { __cgroup_procs_write() { cgroup_procs_write_start() { cgroup_attach_lock() { cpus_read_lock() { percpu_down_read(&cpu_hotplug_lock); } percpu_down_write(&cgroup_threadgroup_rwsem); } } cgroup_attach_task() { cgroup_migrate() { cgroup_migrate_execute() { freezer_attach() { mutex_lock(&freezer_mutex); (...snipped...) } } } } (...snipped...) } } } freezer_mutex => cpu_hotplug_lock cgroup_file_write() { freezer_write() { freezer_change_state() { mutex_lock(&freezer_mutex); freezer_apply_state() { static_branch_inc(&freezer_active) { static_key_slow_inc() { cpus_read_lock(); static_key_slow_inc_cpuslocked(); cpus_read_unlock(); } } } mutex_unlock(&freezer_mutex); } } } Swap locking order by moving cpus_read_lock() in freezer_apply_state() to before mutex_lock(&freezer_mutex) in freezer_change_state().
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2023-53523 - can: gs_usb: fix time stamp counter initialization
CVE ID : CVE-2023-53523
Published : Oct. 1, 2025, 12:15 p.m. | 2 hours ago
Description : In the Linux kernel, the following vulnerability has been resolved: can: gs_usb: fix time stamp counter initialization If the gs_usb device driver is unloaded (or unbound) before the interface is shut down, the USB stack first calls the struct usb_driver::disconnect and then the struct net_device_ops::ndo_stop callback. In gs_usb_disconnect() all pending bulk URBs are killed, i.e. no more RX'ed CAN frames are send from the USB device to the host. Later in gs_can_close() a reset control message is send to each CAN channel to remove the controller from the CAN bus. In this race window the USB device can still receive CAN frames from the bus and internally queue them to be send to the host. At least in the current version of the candlelight firmware, the queue of received CAN frames is not emptied during the reset command. After loading (or binding) the gs_usb driver, new URBs are submitted during the struct net_device_ops::ndo_open callback and the candlelight firmware starts sending its already queued CAN frames to the host. However, this scenario was not considered when implementing the hardware timestamp function. The cycle counter/time counter infrastructure is set up (gs_usb_timestamp_init()) after the USBs are submitted, resulting in a NULL pointer dereference if timecounter_cyc2time() (via the call chain: gs_usb_receive_bulk_callback() -> gs_usb_set_timestamp() -> gs_usb_skb_set_timestamp()) is called too early. Move the gs_usb_timestamp_init() function before the URBs are submitted to fix this problem. For a comprehensive solution, we need to consider gs_usb devices with more than 1 channel. The cycle counter/time counter infrastructure is setup per channel, but the RX URBs are per device. Once gs_can_open() of _a_ channel has been called, and URBs have been submitted, the gs_usb_receive_bulk_callback() can be called for _all_ available channels, even for channels that are not running, yet. As cycle counter/time counter has not set up, this will again lead to a NULL pointer dereference. Convert the cycle counter/time counter from a "per channel" to a "per device" functionality. Also set it up, before submitting any URBs to the device. Further in gs_usb_receive_bulk_callback(), don't process any URBs for not started CAN channels, only resubmit the URB.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID : CVE-2023-53523
Published : Oct. 1, 2025, 12:15 p.m. | 2 hours ago
Description : In the Linux kernel, the following vulnerability has been resolved: can: gs_usb: fix time stamp counter initialization If the gs_usb device driver is unloaded (or unbound) before the interface is shut down, the USB stack first calls the struct usb_driver::disconnect and then the struct net_device_ops::ndo_stop callback. In gs_usb_disconnect() all pending bulk URBs are killed, i.e. no more RX'ed CAN frames are send from the USB device to the host. Later in gs_can_close() a reset control message is send to each CAN channel to remove the controller from the CAN bus. In this race window the USB device can still receive CAN frames from the bus and internally queue them to be send to the host. At least in the current version of the candlelight firmware, the queue of received CAN frames is not emptied during the reset command. After loading (or binding) the gs_usb driver, new URBs are submitted during the struct net_device_ops::ndo_open callback and the candlelight firmware starts sending its already queued CAN frames to the host. However, this scenario was not considered when implementing the hardware timestamp function. The cycle counter/time counter infrastructure is set up (gs_usb_timestamp_init()) after the USBs are submitted, resulting in a NULL pointer dereference if timecounter_cyc2time() (via the call chain: gs_usb_receive_bulk_callback() -> gs_usb_set_timestamp() -> gs_usb_skb_set_timestamp()) is called too early. Move the gs_usb_timestamp_init() function before the URBs are submitted to fix this problem. For a comprehensive solution, we need to consider gs_usb devices with more than 1 channel. The cycle counter/time counter infrastructure is setup per channel, but the RX URBs are per device. Once gs_can_open() of _a_ channel has been called, and URBs have been submitted, the gs_usb_receive_bulk_callback() can be called for _all_ available channels, even for channels that are not running, yet. As cycle counter/time counter has not set up, this will again lead to a NULL pointer dereference. Convert the cycle counter/time counter from a "per channel" to a "per device" functionality. Also set it up, before submitting any URBs to the device. Further in gs_usb_receive_bulk_callback(), don't process any URBs for not started CAN channels, only resubmit the URB.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2023-53524 - wifi: iwlwifi: pcie: Fix integer overflow in iwl_write_to_user_buf
CVE ID : CVE-2023-53524
Published : Oct. 1, 2025, 12:15 p.m. | 2 hours ago
Description : In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: pcie: Fix integer overflow in iwl_write_to_user_buf An integer overflow occurs in the iwl_write_to_user_buf() function, which is called by the iwl_dbgfs_monitor_data_read() function. static bool iwl_write_to_user_buf(char __user *user_buf, ssize_t count, void *buf, ssize_t *size, ssize_t *bytes_copied) { int buf_size_left = count - *bytes_copied; buf_size_left = buf_size_left - (buf_size_left % sizeof(u32)); if (*size > buf_size_left) *size = buf_size_left; If the user passes a SIZE_MAX value to the "ssize_t count" parameter, the ssize_t count parameter is assigned to "int buf_size_left". Then compare "*size" with "buf_size_left" . Here, "buf_size_left" is a negative number, so "*size" is assigned "buf_size_left" and goes into the third argument of the copy_to_user function, causing a heap overflow. This is not a security vulnerability because iwl_dbgfs_monitor_data_read() is a debugfs operation with 0400 privileges.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID : CVE-2023-53524
Published : Oct. 1, 2025, 12:15 p.m. | 2 hours ago
Description : In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: pcie: Fix integer overflow in iwl_write_to_user_buf An integer overflow occurs in the iwl_write_to_user_buf() function, which is called by the iwl_dbgfs_monitor_data_read() function. static bool iwl_write_to_user_buf(char __user *user_buf, ssize_t count, void *buf, ssize_t *size, ssize_t *bytes_copied) { int buf_size_left = count - *bytes_copied; buf_size_left = buf_size_left - (buf_size_left % sizeof(u32)); if (*size > buf_size_left) *size = buf_size_left; If the user passes a SIZE_MAX value to the "ssize_t count" parameter, the ssize_t count parameter is assigned to "int buf_size_left". Then compare "*size" with "buf_size_left" . Here, "buf_size_left" is a negative number, so "*size" is assigned "buf_size_left" and goes into the third argument of the copy_to_user function, causing a heap overflow. This is not a security vulnerability because iwl_dbgfs_monitor_data_read() is a debugfs operation with 0400 privileges.
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE-2023-53525 - RDMA/cma: Allow UD qp_type to join multicast only
CVE ID : CVE-2023-53525
Published : Oct. 1, 2025, 12:15 p.m. | 2 hours ago
Description : In the Linux kernel, the following vulnerability has been resolved: RDMA/cma: Allow UD qp_type to join multicast only As for multicast: - The SIDR is the only mode that makes sense; - Besides PS_UDP, other port spaces like PS_IB is also allowed, as it is UD compatible. In this case qkey also needs to be set [1]. This patch allows only UD qp_type to join multicast, and set qkey to default if it's not set, to fix an uninit-value error: the ib->rec.qkey field is accessed without being initialized. ===================================================== BUG: KMSAN: uninit-value in cma_set_qkey drivers/infiniband/core/cma.c:510 [inline] BUG: KMSAN: uninit-value in cma_make_mc_event+0xb73/0xe00 drivers/infiniband/core/cma.c:4570 cma_set_qkey drivers/infiniband/core/cma.c:510 [inline] cma_make_mc_event+0xb73/0xe00 drivers/infiniband/core/cma.c:4570 cma_iboe_join_multicast drivers/infiniband/core/cma.c:4782 [inline] rdma_join_multicast+0x2b83/0x30a0 drivers/infiniband/core/cma.c:4814 ucma_process_join+0xa76/0xf60 drivers/infiniband/core/ucma.c:1479 ucma_join_multicast+0x1e3/0x250 drivers/infiniband/core/ucma.c:1546 ucma_write+0x639/0x6d0 drivers/infiniband/core/ucma.c:1732 vfs_write+0x8ce/0x2030 fs/read_write.c:588 ksys_write+0x28c/0x520 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __ia32_sys_write+0xdb/0x120 fs/read_write.c:652 do_syscall_32_irqs_on arch/x86/entry/common.c:114 [inline] __do_fast_syscall_32+0x96/0xf0 arch/x86/entry/common.c:180 do_fast_syscall_32+0x34/0x70 arch/x86/entry/common.c:205 do_SYSENTER_32+0x1b/0x20 arch/x86/entry/common.c:248 entry_SYSENTER_compat_after_hwframe+0x4d/0x5c Local variable ib.i created at: cma_iboe_join_multicast drivers/infiniband/core/cma.c:4737 [inline] rdma_join_multicast+0x586/0x30a0 drivers/infiniband/core/cma.c:4814 ucma_process_join+0xa76/0xf60 drivers/infiniband/core/ucma.c:1479 CPU: 0 PID: 29874 Comm: syz-executor.3 Not tainted 5.16.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 ===================================================== [1] https://lore.kernel.org/linux-rdma/20220117183832.GD84788@nvidia.com/
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...
CVE ID : CVE-2023-53525
Published : Oct. 1, 2025, 12:15 p.m. | 2 hours ago
Description : In the Linux kernel, the following vulnerability has been resolved: RDMA/cma: Allow UD qp_type to join multicast only As for multicast: - The SIDR is the only mode that makes sense; - Besides PS_UDP, other port spaces like PS_IB is also allowed, as it is UD compatible. In this case qkey also needs to be set [1]. This patch allows only UD qp_type to join multicast, and set qkey to default if it's not set, to fix an uninit-value error: the ib->rec.qkey field is accessed without being initialized. ===================================================== BUG: KMSAN: uninit-value in cma_set_qkey drivers/infiniband/core/cma.c:510 [inline] BUG: KMSAN: uninit-value in cma_make_mc_event+0xb73/0xe00 drivers/infiniband/core/cma.c:4570 cma_set_qkey drivers/infiniband/core/cma.c:510 [inline] cma_make_mc_event+0xb73/0xe00 drivers/infiniband/core/cma.c:4570 cma_iboe_join_multicast drivers/infiniband/core/cma.c:4782 [inline] rdma_join_multicast+0x2b83/0x30a0 drivers/infiniband/core/cma.c:4814 ucma_process_join+0xa76/0xf60 drivers/infiniband/core/ucma.c:1479 ucma_join_multicast+0x1e3/0x250 drivers/infiniband/core/ucma.c:1546 ucma_write+0x639/0x6d0 drivers/infiniband/core/ucma.c:1732 vfs_write+0x8ce/0x2030 fs/read_write.c:588 ksys_write+0x28c/0x520 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __ia32_sys_write+0xdb/0x120 fs/read_write.c:652 do_syscall_32_irqs_on arch/x86/entry/common.c:114 [inline] __do_fast_syscall_32+0x96/0xf0 arch/x86/entry/common.c:180 do_fast_syscall_32+0x34/0x70 arch/x86/entry/common.c:205 do_SYSENTER_32+0x1b/0x20 arch/x86/entry/common.c:248 entry_SYSENTER_compat_after_hwframe+0x4d/0x5c Local variable ib.i created at: cma_iboe_join_multicast drivers/infiniband/core/cma.c:4737 [inline] rdma_join_multicast+0x586/0x30a0 drivers/infiniband/core/cma.c:4814 ucma_process_join+0xa76/0xf60 drivers/infiniband/core/ucma.c:1479 CPU: 0 PID: 29874 Comm: syz-executor.3 Not tainted 5.16.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 ===================================================== [1] https://lore.kernel.org/linux-rdma/20220117183832.GD84788@nvidia.com/
Severity: 0.0 | NA
Visit the link for more details, such as CVSS details, affected products, timeline, and more...