23-Point Select (PAINTSELECT)
************************
The Point Select (PAINTSELECT) command is used to select/deselect
the objects by paint selection.

Step:
1-Load the "23-POINT SELECTION (PAINTSELECT).vlx" into your AutoCAD
2-Type "PAINTSELECT" and press Enter.
3-Select the area using the paint region.
4-Adjust the size by pressing the " +,-" key
5-To deselect press "SHIFT"

24-Purge Small (PURGESMALL)
************************
The Purge Small (PURGESMALL) command is used to purge the area of
drawing by providing specific size.

Step:
1-Load the "24-QUICK PURGE (PURGESMALL).vlx" into your AutoCAD
2-Type "PURGESMALL" and press Enter.
3-Provide the object size that you want to purge in the
drawing.
4-Press Enter to initiate the purge process.

25-Add Vertex (ADDV, ADDV1)
************************
The Add Vertex (ADDV, ADDV1) command is used to make vertex by pick
points over the arch circle or polyline.

Step:
1-Load the "25-ADD VERTEX (ADDV).vlx" into your AutoCAD
2-Type "ADDV" or "ADDV1" in the command line.
3-Pick a point on the object to create a vertex.
4-The selected point will be marked as a vertex.

26-Area To Excel (PKAREA)
************************
The Area To Excel (PKAREA) command is used to create area in the excel sheet by clicking over the area in AutoCAD.

Step:
1-Load the "26-AREA EXCEL (PKAREA).vlx" into your AutoCAD
2-Type "PKAREA" in the command line.
3-The sheet will open automatically
4-Click inside the closed pline to insert into the Excel sheet

27-Dimension Fix (dimfixl, dimfixt)
************************
The Dimension Fix (dimfixl, dimfixt) command is used to place dimension over the line or by two point quickly.

Step:
1-Load the "27-DIMENSION FIX (DIMFIXL, DIMFIXT).lsp" into your AutoCAD
2-Type "DIMFIXL" or "DIMFIXT" in the command line.
3-Select the line (For "DIMFIXL") to measure the dimension of line.
4-Click two points on the screen (For "DIMFIXT") to measure the dimension of 2 points.

28-Dimension Mask (dimmask)
************************
The Dimension Mask (dimmask) command is used to mask the dimension text quickly

Step:
1-Load the "28-Dimension Mask (DIMMASK).vlx" into your AutoCAD
2-Type "DIMMASK" in the command line.
3-Type the mask color code (by default is "0" or "Black")
4-Type Mask offset
5-You will be prompted to select the dimension.
6-Press "Enter" to get the mask over the dimension text.

29-3Point Rectangle (3PR, 3PRD)
************************
The 3Point Rectangle (3PR, 3PRD) command is used to create 3 point rectangle
over the straight or tapered area.

Step:
1-Load the "29-3Point Rectangle (3PR, 3PRD).lsp" into your AutoCAD
2-Type "3PR" in the command line.
3-Selects the first, second, third point.
4-Click the 3nd point to create a rectangle.
5-Or type "3PRD" in the command line.
6-Click first and second point and than drag the rectangle.

30-Table Coordinate (TABCORD)
************************
The Table Coordinate (TABCORD) command is used to find out coordinates
in table in the autocad.

Step:
1-Load the "30-Table Coordinate (TABCORD).lsp" into your AutoCAD
2-Type "TABCORD" in the command line.
3-Select the polyline press "Enter".
4-Click over the screen to get the table.

31-Arc To Circle (ATC)
************************
The Arc To Circle (ATC) command is used to fill arc with circle just by
selecting at a time.

Step:
1-Load the "31-Arc To Circle (ATC).LSP" into your AutoCAD
2-Type "ATC" in the command line.
3-Select the arc press 'Enter' to get the connected circle.

32-Area Multi Units (ACL)
The Area Multi Units (ACL) command is used to find out area in multi units.

Step:
1-Load the "32-Area Multi Units (ACL).VLX" into your AutoCAD
2-Type "ACL" in the command line.
3-Provide the decimal digit.
4-Select the closed polyline press Enter.
5-Click over the screen to get the multi unit area.

33-Sequence Offset (VXL)
************************
The Sequence Offset (VXL) command is used to provide multiple offset
repeatedly in sequence order.

Step:
1-Load the "33-Sequence Offset (VXL).lsp" into your AutoCAD
2-Type "VXL" in the command line.
3-Click over the line, pline, arc.
4-Provide distance then click repeatedly.

34-Multi Unit Area (DDAREA)
************************
The Multi Unit Area (DDAREA) command is used to find out multi unit
area scale for closed polyline.

Step:
1-Load the "34-Multi Unit Area (DDAREA).Lsp" into your AutoCAD
2-Type "DDAREA" in the command line.
3-Select the desired closed polyline.
4-Press Enter

35-Point Coordinate (COOR)
************************
The Point Coordinate (COOR) command is used to find out coordinates with
table at a time.

Step:
1-Load the "35-Point Coordinate (COOR).lsp" into your AutoCAD
2-Type "COOR" in the command line.
3-Select the second point by clicking on it.
4-Provide the first number.
5-Click to generate a table.
6-Click next points to create more list.

36-Layer Legend (LEGEND)
************************
The Layer Legend (LEGEND) command used to create a layer legend
that screens the complete layer line type color of objects in the drawing.

Step:
1-Load the "36-LAYER LEGEND (LEGEND).LSP" into your AutoCAD
2-Type "LEGEND" in the command line.
3-Select the objects then "Enter"
4-Click over the screen to get the result.

37-Layer Name (LL)
************************
The Layer Name (LL) command used for quickly creating a layer name
over the lines for the entire drawing as shown in
This feature is helpful to find out each layer name quickly.

Step:
1-Load the "37-LAYER NAME (LL).lsp" into your AutoCAD
2-Type "LL" in the command line.
3-Select the objects then "Enter" to get the layer text.