TECNO KM4 — FRP Remove ✓
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service TECNO KM4 on your bench, AndroidWinTool covers it.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service TECNO KM4 on your bench, AndroidWinTool covers it.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
Infinix X6725 — FRP Remove ✓
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service Infinix X6725 on your bench, AndroidWinTool covers it.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service Infinix X6725 on your bench, AndroidWinTool covers it.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
itel S686LN — FRP Remove ✓
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service itel S686LN on your bench, AndroidWinTool covers it.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service itel S686LN on your bench, AndroidWinTool covers it.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
👏2
Realme Note 70 — FRP Remove ✓
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service RE60BA on your bench, AndroidWinTool covers it.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service RE60BA on your bench, AndroidWinTool covers it.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
TECNO KN3 — FRP Remove ✓
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service TECNO KN3 on your bench, AndroidWinTool covers it.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service TECNO KN3 on your bench, AndroidWinTool covers it.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
itel A669W — FRP Remove ✓
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service itel A669W on your bench, AndroidWinTool covers it.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service itel A669W on your bench, AndroidWinTool covers it.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
TECNO BG6m — FRP Remove ✓
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service TECNO BG6m on your bench, AndroidWinTool covers it.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service TECNO BG6m on your bench, AndroidWinTool covers it.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
TECNO KL4 — IMEI Repair ✓
AndroidWinTool handles TECNO KL4 — clean, no box, no data loss.
Method: supported diagnostic mode, single step.
🔗 androidwintool.com
💬 Comment your Software ID — we will confirm support.
AndroidWinTool handles TECNO KL4 — clean, no box, no data loss.
Method: supported diagnostic mode, single step.
🔗 androidwintool.com
💬 Comment your Software ID — we will confirm support.
❤1
Xiaomi Redmi K70E 2311DRK48C — FRP Remove ✓
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service 2311DRK48C on your bench, AndroidWinTool covers it.
This operation may need credits and server availibity if bootloader is locked.
Note: This operation may need credits and server availability if bootloader is locked.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service 2311DRK48C on your bench, AndroidWinTool covers it.
This operation may need credits and server availibity if bootloader is locked.
Note: This operation may need credits and server availability if bootloader is locked.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
Infinix X6725 — IMEI Repair ✓
AndroidWinTool handles Infinix X6725 — clean, no box, no data loss.
Method: supported diagnostic mode, single step.
🔗 androidwintool.com
💬 Comment your Software ID — we will confirm support.
AndroidWinTool handles Infinix X6725 — clean, no box, no data loss.
Method: supported diagnostic mode, single step.
🔗 androidwintool.com
💬 Comment your Software ID — we will confirm support.
❤1
POCO C75 — FRP Remove ✓
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service POCO on your bench, AndroidWinTool covers it.
This operation may need credits and server availibity if bootloader is locked.
Note: This operation may need credits and server availability if bootloader is locked.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service POCO on your bench, AndroidWinTool covers it.
This operation may need credits and server availibity if bootloader is locked.
Note: This operation may need credits and server availability if bootloader is locked.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
❤1
Tecno Camon 30 — FRP Remove ✓ Zero Credits
FRP removal on Tecno's premium Camon series without test point and without credit consumption.
Method: SPRD U2S Diag mode
- Device powered off + Vol Down + USB
- AWT detects SPRD U2S Diag (COM port)
- Single-click FRP removal
When it works:
Camon 30 — pre-2026-Q1 firmware. Confirmed on current factory builds.
When it does NOT work:
- Newer security patches may close this path
- Counterfeit/refurbished units with non-standard partition layout
Time: under 60 seconds per device.
Why zero credit: SPRD-based exploit, no server roundtrip. We absorb the cost as long as our tool supports the chipset family.
Repair shop reality: large daily inventory of Camon 30 units coming through repair workshops.
🔗 androidwintool.com
💬 Comment Tecno model + Software ID for support check.
FRP removal on Tecno's premium Camon series without test point and without credit consumption.
Method: SPRD U2S Diag mode
- Device powered off + Vol Down + USB
- AWT detects SPRD U2S Diag (COM port)
- Single-click FRP removal
When it works:
Camon 30 — pre-2026-Q1 firmware. Confirmed on current factory builds.
When it does NOT work:
- Newer security patches may close this path
- Counterfeit/refurbished units with non-standard partition layout
Time: under 60 seconds per device.
Why zero credit: SPRD-based exploit, no server roundtrip. We absorb the cost as long as our tool supports the chipset family.
Repair shop reality: large daily inventory of Camon 30 units coming through repair workshops.
🔗 androidwintool.com
💬 Comment Tecno model + Software ID for support check.
iTel S25 Ultra — FRP Remove ✓
Single-click FRP removal on iTel's flagship S-series.
Method: SPRD U2S Diag (same family as Tecno SPRD path)
- Vol Down + Power + USB for BROM
- AWT auto-detects
- FRP cleared in seconds
When it works:
iTel S686LN-OP regional builds. SPRD chipset (Spreadtrum).
When it does NOT work:
- Latest OTA may have patched (check Software ID date)
- Some operator-locked variants with custom partitions
iTel undermarketed in many regions despite being a large Transsion sub-brand. Repair shops in West Africa, South Asia, and parts of LATAM see iTel S-series volume.
This is the same SPRD path used for:
- Tecno Spark series
- Infinix Smart series (X-series)
- Realme entry
One tool, multiple Transsion + Spreadtrum families.
🛠 androidwintool.com
💬 Send iTel model + Software ID — I'll verify path.
Single-click FRP removal on iTel's flagship S-series.
Method: SPRD U2S Diag (same family as Tecno SPRD path)
- Vol Down + Power + USB for BROM
- AWT auto-detects
- FRP cleared in seconds
When it works:
iTel S686LN-OP regional builds. SPRD chipset (Spreadtrum).
When it does NOT work:
- Latest OTA may have patched (check Software ID date)
- Some operator-locked variants with custom partitions
iTel undermarketed in many regions despite being a large Transsion sub-brand. Repair shops in West Africa, South Asia, and parts of LATAM see iTel S-series volume.
This is the same SPRD path used for:
- Tecno Spark series
- Infinix Smart series (X-series)
- Realme entry
One tool, multiple Transsion + Spreadtrum families.
🛠 androidwintool.com
💬 Send iTel model + Software ID — I'll verify path.
🔥1
Realme C35 RE87BAL1 — FRP Remove ✓
Single-click FRP on Realme's budget C-series.
Method: SPRD U2S Diag
- Power off device
- Vol Down + USB → SPRD U2S Diag mode
- AWT processes → FRP cleared
When it works:
RMX3511 and similar UNISOC-based Realme C models.
When it does NOT work:
- Realme C variants on MTK chipsets.
- Newer C-series 2026+ models may have closed exploit (check device first)
Common confusion: Realme uses BOTH Unisoc and MTK across different regions. C35 specifically has Unisoc SC9863A — that's why SPRD path works.
Repair shop tip: Always check chipset before connecting. Wrong path = wasted attempt.
🛠 androidwintool.com
💬 Comment Realme model — I'll tell you which path applies.
Single-click FRP on Realme's budget C-series.
Method: SPRD U2S Diag
- Power off device
- Vol Down + USB → SPRD U2S Diag mode
- AWT processes → FRP cleared
When it works:
RMX3511 and similar UNISOC-based Realme C models.
When it does NOT work:
- Realme C variants on MTK chipsets.
- Newer C-series 2026+ models may have closed exploit (check device first)
Common confusion: Realme uses BOTH Unisoc and MTK across different regions. C35 specifically has Unisoc SC9863A — that's why SPRD path works.
Repair shop tip: Always check chipset before connecting. Wrong path = wasted attempt.
🛠 androidwintool.com
💬 Comment Realme model — I'll tell you which path applies.
Realme Note 70T RE60BA — FRP Remove ✓
FRP removal on Realme's 2026 Note 70T entry model.
Method: SPRD U2S Diag
- Standard Vol Down + USB BROM entry
- AWT auto-detects
- Process completes in under a minute
When it works:
RMX5313 RE60BA variant — Unisoc SC9863A or T606 (depending on regional build).
When it does NOT work:
- Latest factory firmware
- Devices already in "wipe" state with locked partition
This is the youngest Realme model with confirmed SPRD bypass at AWT.
🔗 androidwintool.com
💬 Got a Realme Note 70T? Comment firmware date for verification.
FRP removal on Realme's 2026 Note 70T entry model.
Method: SPRD U2S Diag
- Standard Vol Down + USB BROM entry
- AWT auto-detects
- Process completes in under a minute
When it works:
RMX5313 RE60BA variant — Unisoc SC9863A or T606 (depending on regional build).
When it does NOT work:
- Latest factory firmware
- Devices already in "wipe" state with locked partition
This is the youngest Realme model with confirmed SPRD bypass at AWT.
🔗 androidwintool.com
💬 Got a Realme Note 70T? Comment firmware date for verification.
Tecno Spark 40 Pro+ — IMEI Repair ✓
IMEI repair on Tecno's latest Spark Pro+ model.
Method: MTK Preloader / BROM Mode
- Device powered off
- Vol Down + USB → MediaTek Preloader detected
- AWT writes IMEI to NV partition
When it works:
Tecno KM7 on MediaTek Helio G99 / G100. Pre-March 2026 builds.
When it does NOT work:
- Models with sealed bootloader and locked META mode
- Devices in "soft brick" state — flash full firmware first
Tools needed:
- AWT 2.0.6 or later
- USB cable (data, not just charge)
- Optional: USB driver (MTK universal)
Tecno Spark 40 / Spark 40 Pro / Spark 40 Pro+ share the same chipset family but different IMEI partition layouts. Pro+ specifically uses the path above.
Other Spark 40 series models:
- KM5 — META mode supported
- KL5 — META mode + zero-credit FRP
🛠 androidwintool.com
💬 Spark 40 family model? Comment KM/KL code — I'll match the right method.
IMEI repair on Tecno's latest Spark Pro+ model.
Method: MTK Preloader / BROM Mode
- Device powered off
- Vol Down + USB → MediaTek Preloader detected
- AWT writes IMEI to NV partition
When it works:
Tecno KM7 on MediaTek Helio G99 / G100. Pre-March 2026 builds.
When it does NOT work:
- Models with sealed bootloader and locked META mode
- Devices in "soft brick" state — flash full firmware first
Tools needed:
- AWT 2.0.6 or later
- USB cable (data, not just charge)
- Optional: USB driver (MTK universal)
Tecno Spark 40 / Spark 40 Pro / Spark 40 Pro+ share the same chipset family but different IMEI partition layouts. Pro+ specifically uses the path above.
Other Spark 40 series models:
- KM5 — META mode supported
- KL5 — META mode + zero-credit FRP
🛠 androidwintool.com
💬 Spark 40 family model? Comment KM/KL code — I'll match the right method.
Redmi 13C 5G (air) — IMEI Repair ✓
IMEI repair on Redmi's budget 13C 5G variant.
Method: MTK BROM / Preloader
- Power off + Vol Down + USB
- AWT detects Meta or Preloader device
- IMEI written cleanly
When it works:
Redmi 13C 5G "air" variant on MediaTek Dimensity 6100+.
When it does NOT work:
- 13C non-5G (different chipset family — separate path)
- Locked bootloader without ENG ROM access
After-repair note:
IMEI may display as old until you flash the global/China stock ROM. This is normal — partition wrote correctly, display cache needs ROM refresh.
Common Redmi 13 family models:
- 13C 5G (air) — MTK Dimensity 6100+
- 13C non-5G (gold) — MTK Helio G85
- 13 — Snapdragon 4 Gen 2
Each has a different repair path. Check chipset before connecting.
🔗 androidwintool.com
💬 Comment your Redmi 13 variant + chipset for confirmation.
IMEI repair on Redmi's budget 13C 5G variant.
Method: MTK BROM / Preloader
- Power off + Vol Down + USB
- AWT detects Meta or Preloader device
- IMEI written cleanly
When it works:
Redmi 13C 5G "air" variant on MediaTek Dimensity 6100+.
When it does NOT work:
- 13C non-5G (different chipset family — separate path)
- Locked bootloader without ENG ROM access
After-repair note:
IMEI may display as old until you flash the global/China stock ROM. This is normal — partition wrote correctly, display cache needs ROM refresh.
Common Redmi 13 family models:
- 13C 5G (air) — MTK Dimensity 6100+
- 13C non-5G (gold) — MTK Helio G85
- 13 — Snapdragon 4 Gen 2
Each has a different repair path. Check chipset before connecting.
🔗 androidwintool.com
💬 Comment your Redmi 13 variant + chipset for confirmation.
FRP removal on Tecno's high-volume Spark Go 2024 budget device.
Method: SPRD U2S Diag
- Vol Down + USB → SPRD U2S Diag (COM detected)
- AWT processes → FRP cleared single-click
- Confirmed on BG6m-OP-S2 firmware variant
When it works:
BG6m on Unisoc T606 chipset, factory + pre-2026 OTA builds.
When it does NOT work:
- Newer firmware revisions (Tecno pushes Unisoc patches quarterly)
- Hardware sub-variants with different boot ROM signatures (rare but documented)
Why this device matters for repair shops:
Spark Go 2024 is one of Transsion's highest-volume budget launches across Africa, South Asia, and LATAM. Daily inventory flow in workshops makes this exploit valuable for sustained periods.
Sister models on same path:
- KN3 ✓
- BG6m ✓ — this post
- KM5 ✓
- KL5 ✓
🛠 androidwintool.com
💬 Comment Tecno Spark Go variant — I'll confirm the path.
Method: SPRD U2S Diag
- Vol Down + USB → SPRD U2S Diag (COM detected)
- AWT processes → FRP cleared single-click
- Confirmed on BG6m-OP-S2 firmware variant
When it works:
BG6m on Unisoc T606 chipset, factory + pre-2026 OTA builds.
When it does NOT work:
- Newer firmware revisions (Tecno pushes Unisoc patches quarterly)
- Hardware sub-variants with different boot ROM signatures (rare but documented)
Why this device matters for repair shops:
Spark Go 2024 is one of Transsion's highest-volume budget launches across Africa, South Asia, and LATAM. Daily inventory flow in workshops makes this exploit valuable for sustained periods.
Sister models on same path:
- KN3 ✓
- BG6m ✓ — this post
- KM5 ✓
- KL5 ✓
🛠 androidwintool.com
💬 Comment Tecno Spark Go variant — I'll confirm the path.
❤1👍1
Xiaomi CPID Server Repair — AndroidWinTool ✓ Our Most-Used Operation
The single most-used repair function in AWT's history.
What it does:
Xiaomi MTK CPID server repair fixes IMEI corruption on Redmi / Poco / Xiaomi MTK devices when local methods fail. The server validates device identity and writes the IMEI cleanly into NV partition.
Method: Xiaomi MTK CPID Server
- Device in BROM / Preloader mode
- AWT connects to CPID server
- IMEI written, MEID set, calibration preserved
- Server credit consumed per repair
When the works:
- Devices with intact partition table
- Bootloader unlocked OR ENG ROM flashed
- Stable internet (server requires session)
When fails:
- Locked bootloader without ENG ROM or ENG PRELOADER
- Latest HyperOS patches blocking partition writes
- Server timeout (retry usually fixes this)
This is our flagship operation. Daily users come back because on flagship Xiaomi is still better than zero-success on a closed tool.
🔗 androidwintool.com
💬 Comment Xiaomi model + chipset for path verification.
The single most-used repair function in AWT's history.
What it does:
Xiaomi MTK CPID server repair fixes IMEI corruption on Redmi / Poco / Xiaomi MTK devices when local methods fail. The server validates device identity and writes the IMEI cleanly into NV partition.
Method: Xiaomi MTK CPID Server
- Device in BROM / Preloader mode
- AWT connects to CPID server
- IMEI written, MEID set, calibration preserved
- Server credit consumed per repair
When the works:
- Devices with intact partition table
- Bootloader unlocked OR ENG ROM flashed
- Stable internet (server requires session)
When fails:
- Locked bootloader without ENG ROM or ENG PRELOADER
- Latest HyperOS patches blocking partition writes
- Server timeout (retry usually fixes this)
This is our flagship operation. Daily users come back because on flagship Xiaomi is still better than zero-success on a closed tool.
🔗 androidwintool.com
💬 Comment Xiaomi model + chipset for path verification.
Infinix IMEI Repair — AndroidWinTool ✓ across the largest Infinix IMEI dataset in the repair industry.
Support Update
Support Hard Reset ( Factory Reset )
Support Firmware Flashing
IMEI NOT LOST
What this covers:
Infinix Smart series (X-series), Note series, Hot series — MediaTek and Unisoc chipsets. From entry models to mid-range, the same AWT IMEI Repair menu handles them.
Method varies by chipset detection:
MediaTek path:
- BROM / Preloader entry
- IMEI partition direct write
- No server required for MTK Infinix
Unisoc / SPRD path:
- SPRD U2S Diag mode
- NV partition write via diag channel
- No server required
When it works
- Factory firmware or pre-patch builds
- Detectable chipset (preloader or diag responding)
- Standard partition layout (no carrier-specific variant)
When it does not work
- Incorrect connecting on device
- Non-compatible usb drivers
- Cable issues
Common confusion to clear:
- Infinix X-series Smart 10 uses SPRD path (not MTK)
- Hot 40 Pro uses MTK path
- Note 40 Pro uses Helio G99 MTK path
Always check chipset before connecting.
🔗 androidwintool.com
💬 Comment Infinix model + X-code — we'll match the right path.
Support Update
Support Hard Reset ( Factory Reset )
Support Firmware Flashing
IMEI NOT LOST
What this covers:
Infinix Smart series (X-series), Note series, Hot series — MediaTek and Unisoc chipsets. From entry models to mid-range, the same AWT IMEI Repair menu handles them.
Method varies by chipset detection:
MediaTek path:
- BROM / Preloader entry
- IMEI partition direct write
- No server required for MTK Infinix
Unisoc / SPRD path:
- SPRD U2S Diag mode
- NV partition write via diag channel
- No server required
When it works
- Factory firmware or pre-patch builds
- Detectable chipset (preloader or diag responding)
- Standard partition layout (no carrier-specific variant)
When it does not work
- Incorrect connecting on device
- Non-compatible usb drivers
- Cable issues
Common confusion to clear:
- Infinix X-series Smart 10 uses SPRD path (not MTK)
- Hot 40 Pro uses MTK path
- Note 40 Pro uses Helio G99 MTK path
Always check chipset before connecting.
🔗 androidwintool.com
💬 Comment Infinix model + X-code — we'll match the right path.