Redmi 13C 5G — FRP Remove ✓
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service Redmi on your bench, AndroidWinTool covers it.
This operation requires credits and server availbility.
Note: This operation may need credits and server availability if bootloader is locked.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service Redmi on your bench, AndroidWinTool covers it.
This operation requires credits and server availbility.
Note: This operation may need credits and server availability if bootloader is locked.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
🚀 AndroidWinTool v2.1.7 — OUT NOW
Updated Xiaomi Permanent Bootloader Unlock — now covering the latest Qualcomm flagships, no 168-hour wait:
Xiaomi 15 (dada) / 15 Pro (haotian) / 15 Ultra (xuanyuan)
Xiaomi 14 (houji) / 14 Pro (shennong) / 14 Ultra (aurora)
Xiaomi 13 (fuxi) / 13 Pro (nuwa) / 13 Ultra (ishtar)
Redmi K90 (annibale) / K80 Pro (miro) / K80 (zorn) / K70 (vermeer)
Poco F8 Pro (annibale) / F7 Pro (zorn) / F6 Pro (vermeer)
Redmi Turbo 3 (peridot) / Civi 4 Pro (chenfeng)
Xiaomi Mix Fold 4 (goku) / Mix Fold 3 (babylon)
Xiaomi Mix Flip 2 (bixi) / Mix Flip (ruyi)
Xiaomi Pad 7 Pro (muyu) / Pad 7 (uke)
Changelog:
- Updated Xiaomi Permanent Bootloader Unlock
- Fixed various bugs and improved overall stability
🔗 androidwintool.com
Updated Xiaomi Permanent Bootloader Unlock — now covering the latest Qualcomm flagships, no 168-hour wait:
Xiaomi 15 (dada) / 15 Pro (haotian) / 15 Ultra (xuanyuan)
Xiaomi 14 (houji) / 14 Pro (shennong) / 14 Ultra (aurora)
Xiaomi 13 (fuxi) / 13 Pro (nuwa) / 13 Ultra (ishtar)
Redmi K90 (annibale) / K80 Pro (miro) / K80 (zorn) / K70 (vermeer)
Poco F8 Pro (annibale) / F7 Pro (zorn) / F6 Pro (vermeer)
Redmi Turbo 3 (peridot) / Civi 4 Pro (chenfeng)
Xiaomi Mix Fold 4 (goku) / Mix Fold 3 (babylon)
Xiaomi Mix Flip 2 (bixi) / Mix Flip (ruyi)
Xiaomi Pad 7 Pro (muyu) / Pad 7 (uke)
Changelog:
- Updated Xiaomi Permanent Bootloader Unlock
- Fixed various bugs and improved overall stability
🔗 androidwintool.com
TECNO KM4 — FRP Remove ✓
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service TECNO KM4 on your bench, AndroidWinTool covers it.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service TECNO KM4 on your bench, AndroidWinTool covers it.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
Infinix X6725 — FRP Remove ✓
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service Infinix X6725 on your bench, AndroidWinTool covers it.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service Infinix X6725 on your bench, AndroidWinTool covers it.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
itel S686LN — FRP Remove ✓
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service itel S686LN on your bench, AndroidWinTool covers it.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service itel S686LN on your bench, AndroidWinTool covers it.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
👏2
Realme Note 70 — FRP Remove ✓
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service RE60BA on your bench, AndroidWinTool covers it.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service RE60BA on your bench, AndroidWinTool covers it.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
TECNO KN3 — FRP Remove ✓
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service TECNO KN3 on your bench, AndroidWinTool covers it.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service TECNO KN3 on your bench, AndroidWinTool covers it.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
itel A669W — FRP Remove ✓
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service itel A669W on your bench, AndroidWinTool covers it.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service itel A669W on your bench, AndroidWinTool covers it.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
TECNO BG6m — FRP Remove ✓
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service TECNO BG6m on your bench, AndroidWinTool covers it.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service TECNO BG6m on your bench, AndroidWinTool covers it.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
TECNO KL4 — IMEI Repair ✓
AndroidWinTool handles TECNO KL4 — clean, no box, no data loss.
Method: supported diagnostic mode, single step.
🔗 androidwintool.com
💬 Comment your Software ID — we will confirm support.
AndroidWinTool handles TECNO KL4 — clean, no box, no data loss.
Method: supported diagnostic mode, single step.
🔗 androidwintool.com
💬 Comment your Software ID — we will confirm support.
❤1
Xiaomi Redmi K70E 2311DRK48C — FRP Remove ✓
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service 2311DRK48C on your bench, AndroidWinTool covers it.
This operation may need credits and server availibity if bootloader is locked.
Note: This operation may need credits and server availability if bootloader is locked.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service 2311DRK48C on your bench, AndroidWinTool covers it.
This operation may need credits and server availibity if bootloader is locked.
Note: This operation may need credits and server availability if bootloader is locked.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
Infinix X6725 — IMEI Repair ✓
AndroidWinTool handles Infinix X6725 — clean, no box, no data loss.
Method: supported diagnostic mode, single step.
🔗 androidwintool.com
💬 Comment your Software ID — we will confirm support.
AndroidWinTool handles Infinix X6725 — clean, no box, no data loss.
Method: supported diagnostic mode, single step.
🔗 androidwintool.com
💬 Comment your Software ID — we will confirm support.
❤1
POCO C75 — FRP Remove ✓
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service POCO on your bench, AndroidWinTool covers it.
This operation may need credits and server availibity if bootloader is locked.
Note: This operation may need credits and server availability if bootloader is locked.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
Done with AndroidWinTool — clean, no box.
Method: supported diagnostic mode, single step.
If you service POCO on your bench, AndroidWinTool covers it.
This operation may need credits and server availibity if bootloader is locked.
Note: This operation may need credits and server availability if bootloader is locked.
🔗 androidwintool.com
💬 Comment your model + Software ID — we will confirm support.
❤1
Tecno Camon 30 — FRP Remove ✓ Zero Credits
FRP removal on Tecno's premium Camon series without test point and without credit consumption.
Method: SPRD U2S Diag mode
- Device powered off + Vol Down + USB
- AWT detects SPRD U2S Diag (COM port)
- Single-click FRP removal
When it works:
Camon 30 — pre-2026-Q1 firmware. Confirmed on current factory builds.
When it does NOT work:
- Newer security patches may close this path
- Counterfeit/refurbished units with non-standard partition layout
Time: under 60 seconds per device.
Why zero credit: SPRD-based exploit, no server roundtrip. We absorb the cost as long as our tool supports the chipset family.
Repair shop reality: large daily inventory of Camon 30 units coming through repair workshops.
🔗 androidwintool.com
💬 Comment Tecno model + Software ID for support check.
FRP removal on Tecno's premium Camon series without test point and without credit consumption.
Method: SPRD U2S Diag mode
- Device powered off + Vol Down + USB
- AWT detects SPRD U2S Diag (COM port)
- Single-click FRP removal
When it works:
Camon 30 — pre-2026-Q1 firmware. Confirmed on current factory builds.
When it does NOT work:
- Newer security patches may close this path
- Counterfeit/refurbished units with non-standard partition layout
Time: under 60 seconds per device.
Why zero credit: SPRD-based exploit, no server roundtrip. We absorb the cost as long as our tool supports the chipset family.
Repair shop reality: large daily inventory of Camon 30 units coming through repair workshops.
🔗 androidwintool.com
💬 Comment Tecno model + Software ID for support check.
iTel S25 Ultra — FRP Remove ✓
Single-click FRP removal on iTel's flagship S-series.
Method: SPRD U2S Diag (same family as Tecno SPRD path)
- Vol Down + Power + USB for BROM
- AWT auto-detects
- FRP cleared in seconds
When it works:
iTel S686LN-OP regional builds. SPRD chipset (Spreadtrum).
When it does NOT work:
- Latest OTA may have patched (check Software ID date)
- Some operator-locked variants with custom partitions
iTel undermarketed in many regions despite being a large Transsion sub-brand. Repair shops in West Africa, South Asia, and parts of LATAM see iTel S-series volume.
This is the same SPRD path used for:
- Tecno Spark series
- Infinix Smart series (X-series)
- Realme entry
One tool, multiple Transsion + Spreadtrum families.
🛠 androidwintool.com
💬 Send iTel model + Software ID — I'll verify path.
Single-click FRP removal on iTel's flagship S-series.
Method: SPRD U2S Diag (same family as Tecno SPRD path)
- Vol Down + Power + USB for BROM
- AWT auto-detects
- FRP cleared in seconds
When it works:
iTel S686LN-OP regional builds. SPRD chipset (Spreadtrum).
When it does NOT work:
- Latest OTA may have patched (check Software ID date)
- Some operator-locked variants with custom partitions
iTel undermarketed in many regions despite being a large Transsion sub-brand. Repair shops in West Africa, South Asia, and parts of LATAM see iTel S-series volume.
This is the same SPRD path used for:
- Tecno Spark series
- Infinix Smart series (X-series)
- Realme entry
One tool, multiple Transsion + Spreadtrum families.
🛠 androidwintool.com
💬 Send iTel model + Software ID — I'll verify path.
🔥1
Realme C35 RE87BAL1 — FRP Remove ✓
Single-click FRP on Realme's budget C-series.
Method: SPRD U2S Diag
- Power off device
- Vol Down + USB → SPRD U2S Diag mode
- AWT processes → FRP cleared
When it works:
RMX3511 and similar UNISOC-based Realme C models.
When it does NOT work:
- Realme C variants on MTK chipsets.
- Newer C-series 2026+ models may have closed exploit (check device first)
Common confusion: Realme uses BOTH Unisoc and MTK across different regions. C35 specifically has Unisoc SC9863A — that's why SPRD path works.
Repair shop tip: Always check chipset before connecting. Wrong path = wasted attempt.
🛠 androidwintool.com
💬 Comment Realme model — I'll tell you which path applies.
Single-click FRP on Realme's budget C-series.
Method: SPRD U2S Diag
- Power off device
- Vol Down + USB → SPRD U2S Diag mode
- AWT processes → FRP cleared
When it works:
RMX3511 and similar UNISOC-based Realme C models.
When it does NOT work:
- Realme C variants on MTK chipsets.
- Newer C-series 2026+ models may have closed exploit (check device first)
Common confusion: Realme uses BOTH Unisoc and MTK across different regions. C35 specifically has Unisoc SC9863A — that's why SPRD path works.
Repair shop tip: Always check chipset before connecting. Wrong path = wasted attempt.
🛠 androidwintool.com
💬 Comment Realme model — I'll tell you which path applies.
Realme Note 70T RE60BA — FRP Remove ✓
FRP removal on Realme's 2026 Note 70T entry model.
Method: SPRD U2S Diag
- Standard Vol Down + USB BROM entry
- AWT auto-detects
- Process completes in under a minute
When it works:
RMX5313 RE60BA variant — Unisoc SC9863A or T606 (depending on regional build).
When it does NOT work:
- Latest factory firmware
- Devices already in "wipe" state with locked partition
This is the youngest Realme model with confirmed SPRD bypass at AWT.
🔗 androidwintool.com
💬 Got a Realme Note 70T? Comment firmware date for verification.
FRP removal on Realme's 2026 Note 70T entry model.
Method: SPRD U2S Diag
- Standard Vol Down + USB BROM entry
- AWT auto-detects
- Process completes in under a minute
When it works:
RMX5313 RE60BA variant — Unisoc SC9863A or T606 (depending on regional build).
When it does NOT work:
- Latest factory firmware
- Devices already in "wipe" state with locked partition
This is the youngest Realme model with confirmed SPRD bypass at AWT.
🔗 androidwintool.com
💬 Got a Realme Note 70T? Comment firmware date for verification.
Tecno Spark 40 Pro+ — IMEI Repair ✓
IMEI repair on Tecno's latest Spark Pro+ model.
Method: MTK Preloader / BROM Mode
- Device powered off
- Vol Down + USB → MediaTek Preloader detected
- AWT writes IMEI to NV partition
When it works:
Tecno KM7 on MediaTek Helio G99 / G100. Pre-March 2026 builds.
When it does NOT work:
- Models with sealed bootloader and locked META mode
- Devices in "soft brick" state — flash full firmware first
Tools needed:
- AWT 2.0.6 or later
- USB cable (data, not just charge)
- Optional: USB driver (MTK universal)
Tecno Spark 40 / Spark 40 Pro / Spark 40 Pro+ share the same chipset family but different IMEI partition layouts. Pro+ specifically uses the path above.
Other Spark 40 series models:
- KM5 — META mode supported
- KL5 — META mode + zero-credit FRP
🛠 androidwintool.com
💬 Spark 40 family model? Comment KM/KL code — I'll match the right method.
IMEI repair on Tecno's latest Spark Pro+ model.
Method: MTK Preloader / BROM Mode
- Device powered off
- Vol Down + USB → MediaTek Preloader detected
- AWT writes IMEI to NV partition
When it works:
Tecno KM7 on MediaTek Helio G99 / G100. Pre-March 2026 builds.
When it does NOT work:
- Models with sealed bootloader and locked META mode
- Devices in "soft brick" state — flash full firmware first
Tools needed:
- AWT 2.0.6 or later
- USB cable (data, not just charge)
- Optional: USB driver (MTK universal)
Tecno Spark 40 / Spark 40 Pro / Spark 40 Pro+ share the same chipset family but different IMEI partition layouts. Pro+ specifically uses the path above.
Other Spark 40 series models:
- KM5 — META mode supported
- KL5 — META mode + zero-credit FRP
🛠 androidwintool.com
💬 Spark 40 family model? Comment KM/KL code — I'll match the right method.
Redmi 13C 5G (air) — IMEI Repair ✓
IMEI repair on Redmi's budget 13C 5G variant.
Method: MTK BROM / Preloader
- Power off + Vol Down + USB
- AWT detects Meta or Preloader device
- IMEI written cleanly
When it works:
Redmi 13C 5G "air" variant on MediaTek Dimensity 6100+.
When it does NOT work:
- 13C non-5G (different chipset family — separate path)
- Locked bootloader without ENG ROM access
After-repair note:
IMEI may display as old until you flash the global/China stock ROM. This is normal — partition wrote correctly, display cache needs ROM refresh.
Common Redmi 13 family models:
- 13C 5G (air) — MTK Dimensity 6100+
- 13C non-5G (gold) — MTK Helio G85
- 13 — Snapdragon 4 Gen 2
Each has a different repair path. Check chipset before connecting.
🔗 androidwintool.com
💬 Comment your Redmi 13 variant + chipset for confirmation.
IMEI repair on Redmi's budget 13C 5G variant.
Method: MTK BROM / Preloader
- Power off + Vol Down + USB
- AWT detects Meta or Preloader device
- IMEI written cleanly
When it works:
Redmi 13C 5G "air" variant on MediaTek Dimensity 6100+.
When it does NOT work:
- 13C non-5G (different chipset family — separate path)
- Locked bootloader without ENG ROM access
After-repair note:
IMEI may display as old until you flash the global/China stock ROM. This is normal — partition wrote correctly, display cache needs ROM refresh.
Common Redmi 13 family models:
- 13C 5G (air) — MTK Dimensity 6100+
- 13C non-5G (gold) — MTK Helio G85
- 13 — Snapdragon 4 Gen 2
Each has a different repair path. Check chipset before connecting.
🔗 androidwintool.com
💬 Comment your Redmi 13 variant + chipset for confirmation.