🚨 Forward Test Qty Multiplier issue fixed 🚨
The forward test qty multiplier issue has been fixed. Now you can update the Qty multiplier as per your requirements.
The forward test qty multiplier issue has been fixed. Now you can update the Qty multiplier as per your requirements.
❤1
🚨Angel One - issue 🚨
We have not received any confirmation from them if they have looked at or fixed the issue we reported to them yesterday. As mentioned yesterday you may do the following:
1. run your strategies via market order (entry and exit)
2. Move to another broker
We have not received any confirmation from them if they have looked at or fixed the issue we reported to them yesterday. As mentioned yesterday you may do the following:
1. run your strategies via market order (entry and exit)
2. Move to another broker
🚨 Angel One - Update 🚨
Modify end point of Angel One's API which was broken earlier now seems to be working , but we have not received an official confirmation from Angel One Team. Please stay cautious.
Modify end point of Angel One's API which was broken earlier now seems to be working , but we have not received an official confirmation from Angel One Team. Please stay cautious.
🚨Angel One Issue Update 🚨
Kudos to a couple of users who were able to get a reply from AngelOne on what the issue was. We have ha tried to get the same from their team and they had not replied to any of our messages.
Coming to the solution, we have tested the fix and it should be working from today.
Now, the problem, as it was highlighted the modify requests were continuously failing. Our integration logic hasn't changed in the past 3 years and the same payload used to work before but it had stopped working for a couple of days now. Certainly, the API team made this key as a required parameter at some point of time, which wasn't the case before.
Nonetheless, we tried going over our request structure again and again and couldn't figure out what was wrong. Even the API response, we got had a status code of 200(which means it's a success), but the response content would be:
{"message":"Internal Error","errorcode":"AB2001","status":false,"data":null}
Going over the documentation, it says AB2001 implies "Internal Error, Please try after sometime". And we definitely retried quite a few times.
The standard protocol of such validation errors are that the response code should be 400 and the description should say which required fields are missing which if we had we would have fixed the problem a long time ago. Not only the error description was insufficient to decode the issue, it was rather misleading that there's an intermittent problem with modify endpoint and hence you're getting internal error so retry after sometime.
Now that we have the problem identified, we have revisited the entire integration and tested it thoroughly. You shouldn't be facing this issue anymore.
My sincere apologies, if you feel that this was a lapse on our part, but I can assure you the entire team has been on this case for the past few days and we strive to tackle all such issues with any of the 40+ brokers we are integrated with.
Kudos to a couple of users who were able to get a reply from AngelOne on what the issue was. We have ha tried to get the same from their team and they had not replied to any of our messages.
Coming to the solution, we have tested the fix and it should be working from today.
Now, the problem, as it was highlighted the modify requests were continuously failing. Our integration logic hasn't changed in the past 3 years and the same payload used to work before but it had stopped working for a couple of days now. Certainly, the API team made this key as a required parameter at some point of time, which wasn't the case before.
Nonetheless, we tried going over our request structure again and again and couldn't figure out what was wrong. Even the API response, we got had a status code of 200(which means it's a success), but the response content would be:
{"message":"Internal Error","errorcode":"AB2001","status":false,"data":null}
Going over the documentation, it says AB2001 implies "Internal Error, Please try after sometime". And we definitely retried quite a few times.
The standard protocol of such validation errors are that the response code should be 400 and the description should say which required fields are missing which if we had we would have fixed the problem a long time ago. Not only the error description was insufficient to decode the issue, it was rather misleading that there's an intermittent problem with modify endpoint and hence you're getting internal error so retry after sometime.
Now that we have the problem identified, we have revisited the entire integration and tested it thoroughly. You shouldn't be facing this issue anymore.
My sincere apologies, if you feel that this was a lapse on our part, but I can assure you the entire team has been on this case for the past few days and we strive to tackle all such issues with any of the 40+ brokers we are integrated with.
👏3❤1
🚨Strategy going in pending state after activation 🚨
Strategy activation is not working properly in Algo Trade (New Version).
Intraday strategies are going into Paused State.
Positional Strategies are not restarting.
RA Algos are going into Paused State
Forward test is going into Paused State
We are looking into the issue and will keep you updated.
Algo Trade (Old Version) is working fine.
Strategy activation is not working properly in Algo Trade (New Version).
Intraday strategies are going into Paused State.
Positional Strategies are not restarting.
RA Algos are going into Paused State
Forward test is going into Paused State
We are looking into the issue and will keep you updated.
Algo Trade (Old Version) is working fine.
🚨Strategy going in pending state after activation 🚨 - FIXED
The issue has been fixed. All your strategies that were in paused state would now be in "Running" state.
You will now be able to Restart Positional strategies.
Forward test will be in Running state.
Both Old and New Version will be working fine.
Please make sure to refresh your screens.
IMPORTANT: Make sure the correct strategies have been activated for today. Please check both OLD and NEW Version for activated strategies.
The issue has been fixed. All your strategies that were in paused state would now be in "Running" state.
You will now be able to Restart Positional strategies.
Forward test will be in Running state.
Both Old and New Version will be working fine.
Please make sure to refresh your screens.
IMPORTANT: Make sure the correct strategies have been activated for today. Please check both OLD and NEW Version for activated strategies.
ANGEL One ISSUE - FIXED
The Angel One issue has been Fixed. Please Activate your strategies as per your original execution settings.
The Angel One issue has been Fixed. Please Activate your strategies as per your original execution settings.
❤1
🚨Strategy going in pending state after activation 🚨 - FIXED
There were some users whose strategies were still in Pending State. Please refresh your screens and check again. The status would have changed to "Running".
Sincere Apologies for this 🙏
There were some users whose strategies were still in Pending State. Please refresh your screens and check again. The status would have changed to "Running".
Sincere Apologies for this 🙏
🚨 AMA: Signals & Automating Trading on Frontpage 🚨🗓️
Today | ⏰ 11 AM – 4 PM 📍 All About Indices Club on Frontpage
Learn how to turn your signals and indicators into fully automated trading systems — no coding needed!
🎯 With Chintan Jaggi (Prop Trader & Algotest Co-founder)
💼 Scaled his capital to ₹5Cr+ 👥 Helped 1000+ traders go systematic
Don't miss this one if you're using setups but still executing manually.
👉 Join the Club
Drop your questions during the AMA!
https://front.page/all-about-indices/538527760
Today | ⏰ 11 AM – 4 PM 📍 All About Indices Club on Frontpage
Learn how to turn your signals and indicators into fully automated trading systems — no coding needed!
🎯 With Chintan Jaggi (Prop Trader & Algotest Co-founder)
💼 Scaled his capital to ₹5Cr+ 👥 Helped 1000+ traders go systematic
Don't miss this one if you're using setups but still executing manually.
👉 Join the Club
Drop your questions during the AMA!
https://front.page/all-about-indices/538527760
FrontPage
Post by Market Indices Mod
CLOSED
🚨 Ask Me Anything – Signals & Automating Trading 🚨
With @chintanjaggi from @algotest 🤖📊
Chintan has scaled his capital to ₹5Cr+ using systematic ...
🚨 Ask Me Anything – Signals & Automating Trading 🚨
With @chintanjaggi from @algotest 🤖📊
Chintan has scaled his capital to ₹5Cr+ using systematic ...
👍1
🚨Strategy going in pending state after activation 🚨
Strategy activation is not working properly in Algo Trade .
Intraday strategies are going into Paused State.
Positional Strategies are not restarting.
RA Algos are going into Paused State
Forward test is going into Paused State
We are looking into the issue and will keep you updated.
Strategy activation is not working properly in Algo Trade .
Intraday strategies are going into Paused State.
Positional Strategies are not restarting.
RA Algos are going into Paused State
Forward test is going into Paused State
We are looking into the issue and will keep you updated.
👍2
🚨Strategy going in pending state after activation 🚨 - FIXED
The issue has been fixed. All your strategies that were in paused state would now be in "Running" state.
You will now be able to Restart Positional strategies.
Forward test will be in Running state.
Both Old and New Version will be working fine.
Please make sure to refresh your screens.
IMPORTANT: Make sure the correct strategies have been activated for today. Please check both OLD and NEW Version for activated strategies.
The issue has been fixed. All your strategies that were in paused state would now be in "Running" state.
You will now be able to Restart Positional strategies.
Forward test will be in Running state.
Both Old and New Version will be working fine.
Please make sure to refresh your screens.
IMPORTANT: Make sure the correct strategies have been activated for today. Please check both OLD and NEW Version for activated strategies.
👍2
Struggling to make consistent profits with your options strategies?
This Sunday, Chintan is hosting a workshop on Option Buying to help you refine your trading process and achieve better results.
Join us as we walk you through a step-by-step approach to mastering option buying and turning your strategies into success.
✅ Discover how retail traders can generate consistent profits
✅ Master option buying strategies
✅ Get your strategies reviewed and receive LIVE mentoring!
📅 Date: 18th May 2025
⏰ Time: 6 PM
🚀 Don't miss this opportunity — secure your spot now!
🔗 Register Now: http://bit.ly/4jXqMWI
This Sunday, Chintan is hosting a workshop on Option Buying to help you refine your trading process and achieve better results.
Join us as we walk you through a step-by-step approach to mastering option buying and turning your strategies into success.
✅ Discover how retail traders can generate consistent profits
✅ Master option buying strategies
✅ Get your strategies reviewed and receive LIVE mentoring!
📅 Date: 18th May 2025
⏰ Time: 6 PM
🚀 Don't miss this opportunity — secure your spot now!
🔗 Register Now: http://bit.ly/4jXqMWI
❤1
🚀 New Update Alert!
Many users have been asking how to deploy strategies across all brokers with just one click and how to get started with the new Algotrade version.
We’ve created a step-by-step video tutorial to help you:
✅ Deploy strategies instantly
✅ Use the latest features in Algotrade
🎥 Watch the full video here and start automating your trades today! 👇
https://youtu.be/l1ELQsGUwaA?feature=shared
Many users have been asking how to deploy strategies across all brokers with just one click and how to get started with the new Algotrade version.
We’ve created a step-by-step video tutorial to help you:
✅ Deploy strategies instantly
✅ Use the latest features in Algotrade
🎥 Watch the full video here and start automating your trades today! 👇
https://youtu.be/l1ELQsGUwaA?feature=shared
YouTube
How to Activate Strategies on AlgoTest !
In this video, you’ll learn how to activate your strategy for live trading (Algo Trade) and forward testing using the AlgoTest. We’ll also introduce a powerful new feature – Multi-Broker Selection and Activation – that allows you to activate your strategy…
Hi everyone,
We’re hosting a workshop on Signals with Archit Mittal!
🚀Indicator Based Algos Masterclass!
💻 Join us LIVE to learn:
1. Visually build strategies using TradingView
2. Connect signals from ChartInk & TradingView
3. Use AI to design goal-based strategies and much more!
📅Date: Saturday 17th May 2025
🕛Time: 03:00 PM
🔗Zoom Link: https://us06web.zoom.us/meeting/register/es-KoIH3TE-UDKCfsVYWDA
We’re hosting a workshop on Signals with Archit Mittal!
🚀Indicator Based Algos Masterclass!
💻 Join us LIVE to learn:
1. Visually build strategies using TradingView
2. Connect signals from ChartInk & TradingView
3. Use AI to design goal-based strategies and much more!
📅Date: Saturday 17th May 2025
🕛Time: 03:00 PM
🔗Zoom Link: https://us06web.zoom.us/meeting/register/es-KoIH3TE-UDKCfsVYWDA
👍2
🚀 New Feature Alert: Broker Level SL/Target Now Available!
We’ve added Broker Level Stop Loss and Target to both AlgoTrade New Version and Signals, but please note that the functionality differs slightly between the two as per user requests.
🔹 For AlgoTrade New Version:
-Set SL/Target across all active or squared-off strategies for the day.
-Broker-level SL/Target can be set at any point during the day and will consider the P&L of all running and squared-off strategies for that broker.
🔹 For Signals :
-Set broker-level SL/Target from the Signals Execution page.
-Once hit, all signals for the day are blocked for that broker.
-To allow further trades after a broker-level SL/Target is hit, you must manually reset it from the Signals Execution page.
⚠️ Note:
-Broker-level settings must be set daily and apply only to strategies deployed via AlgoTest, not manual trades.
-Strategies in a paused state or switched to manual mode are excluded from MTM calculations.
-For strategies that go into an error state, only the closed leg MTM will be considered in broker-level calculations.
We’ve added Broker Level Stop Loss and Target to both AlgoTrade New Version and Signals, but please note that the functionality differs slightly between the two as per user requests.
🔹 For AlgoTrade New Version:
-Set SL/Target across all active or squared-off strategies for the day.
-Broker-level SL/Target can be set at any point during the day and will consider the P&L of all running and squared-off strategies for that broker.
🔹 For Signals :
-Set broker-level SL/Target from the Signals Execution page.
-Once hit, all signals for the day are blocked for that broker.
-To allow further trades after a broker-level SL/Target is hit, you must manually reset it from the Signals Execution page.
⚠️ Note:
-Broker-level settings must be set daily and apply only to strategies deployed via AlgoTest, not manual trades.
-Strategies in a paused state or switched to manual mode are excluded from MTM calculations.
-For strategies that go into an error state, only the closed leg MTM will be considered in broker-level calculations.
👍4❤2⚡1🔥1
QTY Multiplier not working
QTY Multiplier is not working on AlgoTrade New version. QTY Multiplier is working on AlgoTrade old version. Please use that for now. We are working on to Fix it for AlgoTrade New Version.
QTY Multiplier is not working on AlgoTrade New version. QTY Multiplier is working on AlgoTrade old version. Please use that for now. We are working on to Fix it for AlgoTrade New Version.
🥱4👍1
QTY Multiplier - Fixed
QTY Multiplier is working now. Sorry for the inconvenience.
QTY Multiplier is working now. Sorry for the inconvenience.
👍4
Flattrade - Error
Flattrade users are getting error of "SSL Certification Failed" . It is a issue from their side their SSL Certificate was expired. We have informed about this to them and they have fixed this issue.
Flattrade users are getting error of "SSL Certification Failed" . It is a issue from their side their SSL Certificate was expired. We have informed about this to them and they have fixed this issue.
👍5😱1
Flattrade Broker Login Issue
Some flattrade users are not able to do broker login. This appears to be a problem on the broker's side. In the meantime, you can try logging in using incognito mode or a different browser—this has worked for some users.
We have raised this issue to the flattrade team and they are looking into it.
Some flattrade users are not able to do broker login. This appears to be a problem on the broker's side. In the meantime, you can try logging in using incognito mode or a different browser—this has worked for some users.
We have raised this issue to the flattrade team and they are looking into it.